Angelo Decor AD93165 Operating instructions

Angelo Decor
Brand
Angelo Decor
Model
AD93165
Category
Electrical wallplates
Type
Operating instructions
Thank you for buying an Angelo Decor Fountain!
We ho
p
e
y
ou will find these instructions hel
p
ful in settin
g
u
p
y
our fountain. If
y
ou need more
information to
p
ro
p
erl
y
care for
y
our fountain,
p
lease DO NOT return the unit to
p
lace of
p
urchase.
Please visit our web site, www.an
g
elodecor.com, for assistance and warrant
y
information.
First unpack carton carefully, arranging parts safely in your working area.
Pump comes pre-installed with cord seal. Set the pump to the Connect the tubing to pump. Feed the tubing from the
Adjust the length of pump cord, desired setting. "T" up each hole as
then tighten the cord seal. shown.
Set the 1st cover Insert the PVC into Feed the long tubing Set the second bowl Inset PVC pipe into second
plate into place. the rear hole of through the rear hole of into place. cover plate.Set the cover
the cover plate. the second bowl. Connect the plate into place.
other tube to the
copper outlet.
Set the 3rd bowl Insert the PVC to 3rd Connect the tubing to
into place. cover plate and set the top piece,and set
cover plate into place. into place.
The final assembly
should look as follows
Adjust the restrictor Install the pump access door.
to desired water flow.
Now simply fill with clean water and plug into a grounded GFCI outlet
We recommend keeping bowl 3/4 full of water to avoid pump burnout.
Your fountain works better and lasts longer when kept clean using mild soap and soft cloth on a regular basis.
  • Page 1 1

Angelo Decor AD93165 Operating instructions

Angelo Decor
Brand
Angelo Decor
Model
AD93165
Category
Electrical wallplates
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents