JASIWAY J-B2005P-GY User manual

Brand
JASIWAY
Model
J-B2005P-GY
Type
User manual

This manual is also suitable for

1
Installation
Instruction of B2005P
lower drawer
left side panel=1
123
5678
910 11
14
13 15
12
16
2
4
side cabinet door panel=1
side cabinet back panel=1
side panel=1
lower drawer panel=1
panel=1
side cabinet top panel=1
drawer bottom panel=1
side cabinet left side
panel=1
lower drawer
back panel=1
drawer left side panel=1
side cabinet bottom panel=1 side cabinet right side panel =1
side cabinet top panel=1
side cabinet middle panel=1
pull drawer panel=1
17
drawer tail panel=1
18 19 20
21
pull drawer
bottom panel=2
pull drawer
left side panel=2
pull drawer
back panel=2
pull drawer
front panel=2
22 23 24
lower drawer
right side panel=1
drawer right
side panel=1
pull drawer right
side panel=2
HARDWARE LIST
A A B C
DE F
cam Lock(54pcs) rod(54 pcs)
3
G
H
phillips head screw driver required
for assemble---not include
I J K
L M N O
P Q R S
8*30 wood dowel=14 3.5*40 self-tapping
screw=4
glue hammer=4 6*20 big flat screw=10 8*30 big flat screw=3 M8 meson=12
M8 screw nut=3
8*70 straight support=3 half crescent=3 wrench=1
M6 adjustable foot=2 10 inch rail=3
φ38 round wire box=3
wool pad=4
hinge=2
long hardware foot=2 short hardware foot=1
3.5*14
self-tapping screw=40
A
A
15
10
13
14
P
E
10
Assemble long hardware feet(P):
1.Use four pcs(E)6*20 big flat screws
to install (P)long hardware feet on
⑩side cabinet bottom panel.
2.Be careful not to scratch the panel.
Assemble ⑩bottom panel,⑬side cabinet middle panel,⑭side cabinet top
panel and ⑮back panel ：
1.Use six pcs(A)cam locks,rods and two pcs(B)wood dowels to connect
panel ⑩⑬⑭⑮.
Noted:The keyhole of ⑮back panel is face to the behind.
4
11
12
A
A
B
O
M
A
A
9
Assemble ⑨side cabinet top panel、 ⑮back panel、⑬ middle
panel:
1.Use two pcs(A)cam locks,rods and two pcs(B)wood dowels to
connect panel ⑨,⑬，⑮.
Assemble ⑪⑫side cabinetleft/right side panel、⑩bottom panel、⑨top
panel、⑮back panel：
Please use(O) 3.5*14 self-tapping screws to fix(M)10 inch rails on ⑫side
cabinet right side panel and ⑬side cabinet middle panel before assemble.
1.Use 12 pcs(A)cam locks,rods and eight pcs(B)wood dowels to connect
⑨⑩⑪⑫.
3.Use two pcs(A)cam locks,two pcs(A)rods,two pcs(B)wood dowels to tighten
up ⑪side cabinet left side panel, ⑭side cabinet top panel.
5
Assemble pull drawers：
1.Use eight pcs(A)cam locks,rods to install panel
(18)pull drawer left side panel、(19)pull drawer
back panel、(20)pull drawer front panel、(21)pull drawer
bottom panel respectively.
2.Use (O)3.5*14 self-tapping screws to fix(M)10 inch rails
on panel (18)pull drawer left side panel and (24)pull
drawer right side panel.
Assemble pull drawer panel ：
1.Use four(G)M8 mesons,four(E)6*20 big flat
screws to fix two pull drawers on ⑰pull
drawer panel.
18
M
O
19
A
A
24
21
20
G
E
17
7
23
6
5
8
C
O
A
Assemble drawers:
1.Firstly,use eight pcs(C) 3.5*40 self-tapping
screws to fix ⑥drawer left side panel ，⑦drawer tail panel
and(23)drawer right side panel .
2.Place ⑧drawer bottom panel along the slots of
⑥drawer left side panel and (23)drawer right side panel.
3.Then use four pcs(A)cam locks and four pcs(A)rods to install
⑤drawer panel.
4.Use four pcs(O) 3.5*14 self-tapping screw s to fix
(M)10 inch rails on the outside of ⑥ drawer left side panel and
(23)drawer right side panel.
M
6
Assemble side cabinet door：
1.Use eight pcs(0)3.5*14 self-tapping screws,two
pcs(N)hinges to fix ⑯side cabinet door panel on
the cabinet.
2.Install ⑰ pull drawer panel along the rail groove.
Lower drawer installation:
1.Use eight pcs(A)cam locks,rods to fix panel ③lower
drawer left side panel、④lower drawer back panel and
(22)lower drawer right side panel.
16
N
O
22
M
O
A
A
4
3
Noted:Before install lower drawer,use(O)3.5*14 self-tapping
screws to fix(M)10 inch rails on the inside of (22)lower
drawer right side panel and ③lower drawer left side panel
respectively.
KJ
G
H
I
Cabinet lower rack installation：
1.Use three pcs(J)M8 screw nuts,(G)M8 mesons,(I)half
crescents,(H)straight support to fix ①panel and ②
side panel,and tighten up with one pcs(K) wrench.
Noted:After the installation is complete,
cover the holes with (S)φ38 round wire box.
7
Install the drawer under the
panel along the track as shown.
Assemble lower drawer(step
8)、short hardware feet :
1.Use six pcs(A)cam locks,rods to
fix lower drawer under ①panel.
2.Install(L)M6 adjustable feet
on ② side panel as shown.
3.Use two pcs(E)6*20 big flat
screws to install (Q)short
hardware foot under to①panel.
4.Finally,stick(R)wool pads
on(Q)short hardware feet.
L
L
Q
E
R
A
A
8
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

JASIWAY J-B2005P-GY User manual

Brand
JASIWAY
Model
J-B2005P-GY
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents