QUALITY SINCE 1948
Fixing instructions for Electro-magnetic hold open device for:
9133NE/9134NE concealed closers when used with the approved 2mm thick intumescent kit for fire rated doors. Dimensions in brackets refer
to 9134NE EN3-6 model. Please disregard channel fixing instruction/dimensions supplied with mechanical door closers if this Electro-magnetic
hold open version is being used. Issue 01-02/22
T: 020 7387 9951 www.allgood.co.uk
max.120°
max.1100(1400)
52790
12
5
286x38(300x45)
Ø8(24 VDC/0.058A)
12
99(96)
73(70) 500
9320(334)
338(352)
==
20
175
12
min. 38(45)
5
48(54)
32
min. 36
max. 16
R8
110 211 211
78 551
9133NE (9134NE)
3-43 8 1 1 3
2812-CPR-AE7849
9133NE
9134NE
APPROVED
PRODUCT
CF 6022
ALLGOOD PLC
63-83 BREARLEY STREET
BIRMINGHAM
B19 3NT
EN 1155: 1997/A1:2002/AC:2006
6-3
3 8 1 1 3
2812-CPR-AE7849
APPROVED
PRODUCT
CF 6022
ALLGOOD PLC
63-83 BREARLEY STREET
BIRMINGHAM
B19 3NT
EN 1155: 1997/A1:2002/AC:2006
QUALITY SINCE 1948
Fixing instructions for Electro-magnetic hold open device for:
9133NE/9134NE concealed closers when used with the approved 2mm thick intumescent kit for fire rated doors. Dimensions in brackets refer
to 9134NE EN3-6 model. Please disregard channel fixing instruction/dimensions supplied with mechanical door closers if this Electro-magnetic
hold open version is being used. Issue 01-02/22
T: 020 7387 9951 www.allgood.co.uk
2.5
90°
120°-0°
10°-0°
1
3
2
30°
5
5
max. 10Nm
max. 8Nm
≥EN3
1 2 3 4
5 6 7 8
9 10 11
Nm
2
2
1
4
2
1
1
1
3
2.5
8
3
3
The hold open function should not
be used at angles of less than 65°
120°
80°
3
Adjust the pull-off force to suit the door width and size of door closer.
Notice, if the pull-off force is set too high, it may damage the hinges and
the fixing of the door closer system.
*EN 1155 states that the release torque at 90° door opening angle should be
between 40 and 120 Nm.
Nm
1100mm
Max
80Kg
EN4
950mm
Max
60Kg
EN3
1400mm
Max
120Kg
EN6
1250mm
Max
100Kg
EN5
S1000 EN3-4
S1036 EN3-6
/
