Connects2 APH-FD02 User manual

Connects2
Brand
Connects2
Model
APH-FD02
Category
Car speakers
Type
User manual

Connects2 APH-FD02 is a speaker connection harness designed for select 2018-2019 Ford vehicles with factory-amplified B&O sound systems. It simplifies speaker wire connections when adding an aftermarket radio or amplifier, eliminating the need to cut or modify the original vehicle wiring.

Key features of the APH-FD02 include:

  • Easy aftermarket equipment integration: Allows for seamless addition of aftermarket radios or amplifiers without altering the vehicle's factory wiring.
  • Color-coded connections: Facilitates quick and accurate wire matching, ensuring proper connections for optimal sound quality.

Connects2 APH-FD02 is a speaker connection harness designed for select 2018-2019 Ford vehicles with factory-amplified B&O sound systems. It simplifies speaker wire connections when adding an aftermarket radio or amplifier, eliminating the need to cut or modify the original vehicle wiring.

Key features of the APH-FD02 include:

  • Easy aftermarket equipment integration: Allows for seamless addition of aftermarket radios or amplifiers without altering the vehicle's factory wiring.
  • Color-coded connections: Facilitates quick and accurate wire matching, ensuring proper connections for optimal sound quality.
Speaker connection harness for select 2018-2019 Ford
vehicles with factory amplied B&O sound systems
Pacific Accessory Corporation
Page 1
Copyright © 2019. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
APH-FD02
Rev: V1
Date: 061819
Introduction and Features
The APH-FD02 simplies speaker wire connections when adding an aftermarket radio or amplier . Aftermarket equipment
can be easily added with no need to cut or modify a vehicle’s original wiring.
Wiring Overview
Installation Notes
1. It is always best to use a tone generator (PAC Part# TL-PTG2) to verify that the tables in this manual, and the labels on the
wires, match the wiring in your specic vehicle.
2. If you are installing an aftermarket amplier, and would like to leave any of the factory speakers connected to the factory
amplier, simply connect the speaker wires (color for color) between the male and female connectors. For example: If you
want the rear speakers to be powered by the factory amplier, simply connect the Green, Green / Black, Purple and Purple /
Black wires from the male connector to the Green, Green / Black, Purple and Purple / Black wires from the female connector.
1. Locate the vehicle factory amplier and disconnect the Gray 20-pin connector.
2. Connect the APH-FD02 harness to the connector that was disconnected in the previous step.
3. Connect the male connector from the APH-FD02 to the amplier.
4. Connect the longer loose wires from the APH-FD02 to your aftermarket amplier or passive crossovers according to the
tables in this manual.
Installation Steps
Connect to aftermarket amplier
20
11
10
1
Green/Black
Red/Black
Purple/Black
White/Black
Gray/Black
Blue/Black
Brown/Black
Orange
Orange
Pink
20
11
10
1
For Future Use
For Future Use
白色热缩管
APH-FD02-HAR V2
Green
Red
Purple
White
Gray
Blue
Brown
Orange
Orange
Pink/Black
Green/Black
Red/Black
Purple/Black
White/Black
Gray/Black
Blue/Black
Brown/Black
Orange
Orange
Pink
Green
Red
Purple
White
Gray
Blue
Brown
Orange
Orange
Pink/Black
1
Pink
CAN +
11
Pink/Black
CAN -
2
Orange
12
Orange
3
Orange
13
Orange
4
Brown / Black
Center Channel -
14
Brown
Center Channel +
5
Blue / Black
Subwoofer 1 -
15
Blue
Subwoofer 1 +
6
Gray / Black
Right Front Speaker -
16
Gray
Right Front Speaker +
7
White / Black
Left Front Speaker -
17
White
Left Front Speaker +
8
Purple / Black
Right Rear Speaker -
18
Purple
Right Rear Speaker +
9
Red / Black
Subwoofer 2 -
19
Red
Subwoofer 2 +
10
Green / Black
Left Rear Speaker -
20
Green
Left Rear Speaker +
Wire Color
Subwoofer 2
Right Front Speaker
Subwoofer 1
N/A
N/A
CAN
Pin Number Wire Description Label
Left Rear Speaker
Center Channel
Left Front Speaker
Right Rear Speaker
  • Page 1 1

Connects2 APH-FD02 User manual

Connects2
Brand
Connects2
Model
APH-FD02
Category
Car speakers
Type
User manual

Connects2 APH-FD02 is a speaker connection harness designed for select 2018-2019 Ford vehicles with factory-amplified B&O sound systems. It simplifies speaker wire connections when adding an aftermarket radio or amplifier, eliminating the need to cut or modify the original vehicle wiring.

Key features of the APH-FD02 include:

  • Easy aftermarket equipment integration: Allows for seamless addition of aftermarket radios or amplifiers without altering the vehicle's factory wiring.
  • Color-coded connections: Facilitates quick and accurate wire matching, ensuring proper connections for optimal sound quality.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents