Cree BA19-08027OMF-12CE26-1C100 User manual

Type
User manual

This manual is also suitable for

Cree BA19-08027OMF-12CE26-1C100:

Dim your lights wirelessly from anywhere using the Cree BA19-08027OMF-12CE26-1C100 Dimmable Connected LED Bulb. This bulb is compatible with Amazon Alexa, Apple HomeKit, and Google Assistant, so you can control your lighting with just your voice. You can also create schedules and scenes to automate your lighting, and adjust the brightness to create the perfect ambiance for any occasion.

Cree BA19-08027OMF-12CE26-1C100:

Dim your lights wirelessly from anywhere using the Cree BA19-08027OMF-12CE26-1C100 Dimmable Connected LED Bulb. This bulb is compatible with Amazon Alexa, Apple HomeKit, and Google Assistant, so you can control your lighting with just your voice. You can also create schedules and scenes to automate your lighting, and adjust the brightness to create the perfect ambiance for any occasion.

Cautions and Warnings
Connected Cree
®
LED Bulbs with 4Flow™ Filament Design
Not suitable for use with standard dimmer switches. Dimmable in App only.
Not intended for use with emergency exit fixtures or emergency lighting.
Risk of electric shock or burns. Turn power off and let cool before inspection or
replacement. Do not open no user serviceable parts inside. Use only on 120
volt AC circuits.
Do not use if outer shell is cracked, broken or missing, even if lamp continues to
light.
Suitable for use in operating environments between -25°C and +45°C (-13°F and
+113°F).
Indoor use only.
Not suitable for use in enclosed fixtures/locations.
To comply with the FCC RF exposure compliance requirements, this device and its
antenna must not be co-located or operating in conjunction with any other antenna
or transmitter. This equipment should be installed and operated with minimum
distance 5cm between the radiator & your body. No other antenna is authorized for
use with this product.
CAUTION: Changes or modifications not expressly approved could void your
authority to use this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
  • Page 1 1
  • Page 2 2

Cree BA19-08027OMF-12CE26-1C100 User manual

Type
User manual
This manual is also suitable for

Cree BA19-08027OMF-12CE26-1C100:

Dim your lights wirelessly from anywhere using the Cree BA19-08027OMF-12CE26-1C100 Dimmable Connected LED Bulb. This bulb is compatible with Amazon Alexa, Apple HomeKit, and Google Assistant, so you can control your lighting with just your voice. You can also create schedules and scenes to automate your lighting, and adjust the brightness to create the perfect ambiance for any occasion.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI