Hampton Bay 14713 Installation guide

Brand: Hampton Bay

Model: 14713

Type: Installation guide

Hampton Bay 14713: Illuminate your space with this stylish 2-Light Flush Mount featuring an Aged Black finish and a Tea Stained Glass Shade. Designed for energy efficiency, it allows the use of a Self Ballasted Compact Fluorescent Bulb instead of an incandescent bulb. Easy to install, it's perfect for adding a touch of classic charm to any room.

INSTRUCTIONS MANUAL

2-LIGHT FLUSH MOUNT

ESSEX COLLECTION

HOME DEPOT SKU# 514-525 (UPC#802513147131)

AGED BLACK FINISH

Thank you for purchasing this Hampton Bay interior Flush Mount. This

product has been manufactured with the highest standards of safety and

quality.

FEATURES:

1. Easy to install.

2. Two light Flush Mount with Aged Black Finish and Tea Stained Glass

Shade.

3. For energy savings this fixture has been engineered to safely use a Self

Ballasted Compact Fluorescent Bulb in place of an incandescent bulb.

QUESTIONS, PROBLEMS, MISSING PARTS:

Before returning to your local Home Depot, please call our Customer

Service Team at 1-877-527-0313 or visit www.homedepot.com. Please

reference your SKU 514-525 or UPC (802513147131)

CAUTION:

1. Before starting installation of this fixture or removal of a previous

fixture, disconnect the power by turning off the circuit breaker or by

removing the fuse at the fuse box.

2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY

ELECTRICAL QUESTIONS. If you haveany non-electrical

questions about this fixture, please call our Customer Service Team at

1-877-527-0313 or visit www.homedepot.com

. Please reference your

SKU (514-525) or UPC (802513147131).

3. Keep your receipt and these Instructions for Proof of Purchase.

TOOLS REQUIRED FOR INSTALLATION AND ASSEMBLY

(not included):

Phillips

screwdriver

Flathead

screwdriver

Safety

goggles

Wire

cutters

Wire

strippers

Electrical

tape

Light Bulb

(Maximum 60watt Medium

Base Incandescence Bulb

or CFL equivalent)

PARTS INCLUDED FOR ASSEMBLY AND INSTALLATION

(parts are not to scale):

ytQstraP

G5/32 inch Hex Nut 2

Support Screw 2

1epiPdedaerhT

Wire Connector 3

G3/8 inch Hex Nut 2

Outlet Box Screw 2

Green Ground Screw 1

Mounting Strip 1

1rehsaW

1paC

1lainiF

1edahSssalG

Fixture Body 1

ASSEMBLY AND INSTALLATION:

G5/32 INCH HEX NUT

SUPPORT SCREW

BARE COPPER

GROUNDING WIRE

OUTLET BOX SCREW

GREEN GROUND SCREW

MOUNTING STRIP

OUTLET BOX

BLACK SUPPLY WIRE

WHITE SUPPLY WIRE

GROUND SUPPLY WIRE

WIRE CONNECTOR

WHITE WIRE

BLACK WIRE

BUSHING

KEY HOLE

CANOPY

G3/8 INCH HEX NUT

THREADED PIPE

G3/8 INCH HEX NUT

CAP

FINIAL

GLASS SHADE

WASHER

SOCKET

ASSEMBLY AND INSTALLATION INSTRUCTIONS:

1. Shut down the main electrical supply from the fuse box or circuit breaker in your house or building.

2. Thread the support screws (long) into hole of mounting strip about 4 complete turns. Lock in place with

G5/32 inch hex nut. Tighten this support screws (long) should extend long enough to protrude through the

canopy when it is mounted.(Adjust as needed)

3. Fasten the mounting strip onto outlet box using two outlet box screws (short).

4. Connect the wire from the fixture to the power supply wire from outlet box. Cover with wire connectors.

A. Twist together two white wires from the fixture with white wire from outlet box. Cover with wire

connector.

B. Twist together two black wires from the fixture with black wire from outlet box. Cover with wire

connector.

C. The bare copper grounding wire from the fixture must loop one turn under the head of green screw on

mounting strip before it is connected to the grounding conductor of the supply circuit.

5. Carefully position all wiring inside outlet box.

6. Attach the canopy to ceiling by passing the support screw through the larger portion of the key holes.

Twist the canopy so that the support screw moves to the narrower portion of the key holes, tighten support

screws.

7. Install the bulbs (not included). Use 60-watt Maximum standard type A bulbs or MAX 13W UL

LISTED CFL bulb.

8. Thread the threaded pipe into the bushing located on the canopy and secure with G3/8 inch hex nut. Place

the glass shade and washer over the threaded pipe and secure by G3/8 inch hex nut (Do not tighten

excessively), then slide the cap over the threaded pipe and secure by the finial as show in diagram.

9. Turn on the electrical power in your house or building to activate the flush mount.

TROUBLESHOOTING:

Possible Cause Corrective Action

.nosiylppusrewoperusekaM.1.ffosirewoP.1

.hctiwsecalperrotseT.2.hctiwsytluaF.2

Lights will not turn on.

3. Faulty wire connection. 3. Check wiring.

Fuse blows or circuit breaker

trips when light is turned on.

1. Crossed wires or power wire is grounding

out.

1. Check wire connections.

PRODUCT MAINTENANCE:

1. To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean

water, never a solvent) to wipe the surface of the fixture.

2. To clean the inside of the fixture, first disconnect power to the fixture by turning off the

circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slightly dampened

clean cloth (use clean water, never a solvent) to wipe the interior surface of the fixture.

3. Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry soft

cloth to dust or wipe carefully.

LIMITED WARRANTY

The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a

period of five (5) years from date of purchase. This warranty applies only to the original consumer purchaser and

only to products used in normal use and service. If this product is found to be defective, the manufacturer’s only

obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s

discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications,

alterations, neglect or mishandling. This warranty shall not apply to any product that is found to have been

improperly installed, set-up, or used in any way not in accordance with the instructions supplied with the product.

This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence,

alteration, or faulty installation, or any other failure not relating to faulty material or workmanship. This

warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is

considered normal wear and tear. The manufacturer does not warrant and specially disclaims any warranty,

whether expressed or implied, of fitness for a particular purpose, other than the warranty contained herein.

The manufacturer specifically disclaims any liability and shall not be liable for any consequential or

incidental loss or damage, including but not limited to any labor/expense costs involved in the replacement

or repair of said product.

MANUAL DE INSTRUCCIONES

LÁMPARA DE TECHO DE 2-LUCES

COLECCIÓN ESSEX

HOME DEPOT SKU# 514-525 (UPC#802513147131)

ACABADO NEGRO ENVEJECIDO

Page is loading ...

DIBUJO DE INSTALACIÓN Y ESAMBLAJE:

G5/32” TUERCA EXAGONAL

TORNILLO DE SOPORTE

ALAMBRE DE COBRE

DESNUDO A TIERRA

TORNILLO CAJA DE EMBUTIR

TORNILLO VERDE A TIERRA

BARRA DE MONTAJE

CAJA DE EMBUTIR

ALAMBRE NEGRO DE

ALAMBRE BLANCO DE

ALAMBRE A TIERRA DE LA

CONECTOR DE ALAMBRE

ALAMBRE BLANCO

ALAMBRE NEGRO

CASQUILLO

ORIFICIO DE LLAVE

DOSEL

G3/8 " TUERCA EXAGONAL

NIPLE DE MONTAJE

G3/8 " TUERCA EXAGONAL

TAPA

FLORON

PANTALLA DE CRISTAL

ARANDELA

BASE DE PORTALAPARAS

FUENTE DE ELECTRICIDAD

Page is loading ...

ASSEMBLAGE ET INSTALLATION :

TRAVERSEE

CABLE NOIR

TROU

DOUILLE

Page is loading ...

Hampton Bay 14713 Installation guide

Brand: Hampton Bay

Model: 14713

Type: Installation guide

Download PDF

report

in other languages

français: Hampton Bay 14713 Guide d'installation
español: Hampton Bay 14713 Guía de instalación

Hampton Bay 14713 Installation guide

Hampton Bay 14713 Installation guide

in other languages

Related papers

Other documents