Generation Lighting SF240BS Operating instructions

Brand: Generation Lighting

Model: SF240BS

Type: Operating instructions

This manual is also suitable for

(E) 10/07

IMPORTANT

TURN OFF THE POWER AT THE MAIN FUSE OR

CIRCUIT BREAKER BOX

BEFORE STARTING INSTALLATION

Carefully unpack and identify all parts before assembly.

Bulb not included.

1. Screw short threaded end of threaded pipe into

coupler located at bottom of socket assembly. Note

correct position of threaded pipe at illustration.

2. Follow enclosed “Multiple Standard Installation

Instructions” for electrical and fixture installation onto

ceiling outlet box.

3. Install bulbs (not included). See relamping label located

at socket area for type and maximum allowed wattage.

4. Slide cap, open side facing down, and glass shade

through the threaded pipe. Secure in position by

fastening with a washer and a hex nut. Do not over

tighten.

5. Slip cap and fasten finial onto threaded pipe.

Bulb

(not included)

Assembly Instructions For

Fixture Plate

Threaded Pipe

Cap

Washer

Hex Nut

Cap

Finial

Glass Shade

Socket

Assembly

SF240

1

Generation Lighting SF240BS Operating instructions

Brand: Generation Lighting

Model: SF240BS

Type: Operating instructions

This manual is also suitable for

Related papers

Other documents