2
6.SecuretheWiFirouterbracket(1)underthepassen
gerseatwiththeprovidedmaterials.
7.Connectthepowerharnessconnector(2)totheWiFi
router.
NOTE:DonotusethepoweroutletforthepowersupplytotheWiFirouter.
8.Locatethecigarettelighteroutletwiringharness.
9.Cuteachwireandremove13mm(0.5in.)ofinsula
tionfromeachwirethatneedstobesoldered/spliced.
10.Placeapieceofsuppliedadhesivelinedheatshrink
tubingononesideofeachcutwire.Insurethetubing
willbelongenoughtocoverandsealtheentiresol
deredarea.
CAUTION:Donotuseacidcoresolder.
11.SolderthesuppliedfusedpigtailtoWiFipowerhar
nesspowerwire.
12.Placethestrandsofthepowersidewiresoverlapping
eachotherinsideofthespliceclip(1).
Oct16,2009K6860899Rev. 2