National Instruments sbRIO-9609 Quick Reference Manual

Brand: National Instruments

Model: sbRIO-9609

Type: Quick Reference Manual

Quick Reference Guide

sbRIO-9609

Kit Contents

Documentation Driver Media USB Cable

Screwdriver

IDC to

DSUB Cable

Thermal

Kit

Standoffs

and Screws

Power SupplysbRIO-9609

RMC Breakout

Board

2019 National Instruments

Information is subject to change without notice. Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for more information on NI trademarks.

Other product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering NI products/

technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patents Notice at

ni.com/patents. You can find information about end-user license agreements (EULAs) and third-party legal notices in the readme file for your NI product. Refer

to the Export Compliance Information at ni.com/legal/export-compliance for the NI global trade compliance policy and how to obtain relevant HTS codes,

ECCNs, and other import/export data. NI MAKES NO EXPRESS OR IMPLIED WARRANTIES AS TO THE ACCURACY OF THE INFORMATION CONTAINED HEREIN

AND SHALL NOT BE LIABLE FOR ANY ERRORS. U.S. Government Customers: The data contained in this manual was developed at private expense and is subject

to the applicable limited rights and restricted data rights as set forth in FAR 52.227-14, DFAR 252.227-7014, and DFAR 252.227-7015.

For a complete list of resources go to the following URL: n i.c o m /r/s b r io

Connect to the Host Computer via Ethernet

1. Power on the host computer.

2. Connect the sbRIO-9609 to the host computer using a standard Category 5

(CAT-5) or better shielded, twisted-pair Ethernet cable.

Connect to Power

1. Ensure that your power supply is powered off.

2. Insert the power connector plug into the power connector receptacle of

the sbRIO-9609 until the connector latches into place.

3. Turn on the power supply.

Connect to the Host Computer via USB

1. Power on the host computer.

2. Connect the USB Type-C 2.0 device port of the sbRIO-9609 to the

host computer using a Type-C to Type-A USB cable.

377896A-03 Oct19

9-30 VDC

Input

Power

Selection and

Protection

On-board

Power

Supplies

Configurable per Module

NI-DAQmx

Technology

sbRIO-9609

Intel Atom E3845

Quad-Core

1.91 GHz Processor

High-Speed CAN

Xilinx Artix-7 200T

Real-Time

Clock

Battery

Holder

Power

Connector

RMC Connector

(240-pin 60x4 Searay)

Optional System

Power 9-30 VDC

2x C Series

Module Interface

Temperature

Sensors

Watchdog

4 GB

eMMC Disk

2 GB

DDR3L

CAN Port

CAN

Controller

5 V

3.3 V

SATA 2.0

PCIe x1 Gen 2

USB 2.0

VBAT

2.5 V/3.3 V

Power Selector

2.5 V/3.3 V

Power Selector

FPGA_VIO [0-47]

Digital I/O [0-47], SE/LVDS

Digital I/O [48-95], SE/LVDS

FPGA_VIO [48-95]

LabVIEW FPGA API Data Path

Processor Data Path

NI-DAQmx API Data Path

Power Path

External Connector/Port

RJ-45 TSN Gigabit

Ethernet Port

PHY

RJ-45 TSN Gigabit

Ethernet Port

PHY

USB 2.0 Device

Type-C Connector

UARTRS-232

RS-232

Console Out

XCVR

USB 3.1 Host

Type-C Connector

with DisplayPort

sbRIO-9609 Block Diagram

V– (GND)

Shield

CAN1_H

CAN1_L

V– (GND)

Shield

CAN Pinout

DCD

TXD

GND

RTS

RXD

DTR

DSR

CTS

Shield

RS-232 (ASRL1) Pinout

1 32 4 5 6

1. Power LED

2. Status LED

3. User1 LED

4. User FPGA1 LED

1. Power terminal 5. RS-232 serial port with Console Out

2. CAN port 6. RJ-45 Gigabit Ethernet ports

3. USB Type-C 2.0 device port 7. RMC connector

4. USB Type-C 3.1 host port

sbRIO-9609 LEDs

sbRIO-9609 Parts Locator Diagram

National Instruments sbRIO-9609 Quick Reference Manual

National Instruments sbRIO-9609 Quick Reference Manual

National Instruments sbRIO-9609 Quick Reference Manual

Related papers

Other documents