2. PROAIM
  3. TP-ALPA-W4U

PROAIM TP-ALPA-W4U User manual

  • Hello! I've reviewed the user manual for the Proaim Cinema Series TP-ALPA-W4U Workstation. This document provides instructions for assembling and using the workstation, which features a 4U rack, quick clamps, and adjustable mounting. I'm ready to assist you with any questions you might have about its setup, features, or components.
  • What is included in the box?
    What is the clamping range of the workstation?
    How does the mounting bracket attach to the workstation?
    How does the tray holder attach to the stand?
1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Workstaon with 4U rack for Alpha Stand
Clamping Range: up to 45mm(TP-ALPA-W4U)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
Workstaon with 4U Rack
Tray Holder
Mounng Bracket 4mm Allen Key
2
Feature: It features two handles on the sides to
raise, lower, or rotate the plaorm.
• To aach the Mounng Bracket to the
Workstaon with 4U Rack, remove all its
bolts using the 4mm Allen key.
Mounng Bracket Assembly
• Repeat the same process with the second
bolt.
• Insert the remaining six bolts inside the rack
and ghten them using the Allen key.
• With the help of the Allen key, all bolts of the
Mounng Bracket have been removed, as
shown in the image.
• Align both holes to aach the Mounng
Bracket to the Workstaon.
• Insert the bolt from above and ghten it
using the Allen key, as shown in the image.
• The Mounng Bracket is securely aached to
the Workstaon with 4U Rack, as shown in
the image.
3
• Loosen the clamp knob of the Workstaon
tray holder and mount it on the Alpha Stand
(Not Included).
Feature: Apart from holding the stand, sturdy
yet lightweight clamps quickly connect, adjust &
disconnect without hassle.
Tray Holder Assembly
• Aer mounng the Workstaon Tray Holder,
ghten the knob of the clamp.
NOTE: The plaorm aaches to your Alpha
stand (Not Included) using a Tray Holder that
has a pair of quick clamps with a 38 to 50mm
clamping range.
NOTE: Its tool-less mounng clamps make it
super quick to connect, adjust and disconnect
from a stand without hassle.
Feature: The workstaon can slide up/down
and rotate 360° while securely clamped to the
mast of your stand, ensuring a solid aachment.
• Your setup is ready, as shown in the image.
Feature: 4U rack mount underneath the
workstaon provides easy accessorizing with
various devices, such as ampliers, mixers,
wireless receivers, and signal processors.
4
Slide Up/ Down & 360° Rotaon
5
YOUR PROAIM WORKSTATION WITH 4U RACK FOR ALPHA STAND
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
/