AR-1213P Electric Cabinet Lock
V230714
ACCESS & INDUSTRIAL CONTROL
Operation:
Install lock holder on the door of cabinet/locker.
Once triggered, the lock bolt will reach out to pop open the door.
Connector Table
Dimension
21
1
2
Application Wire Color Description
Power
1Black DC 0V(GND)
2Red DC 12V
Application Wire Color Description
Lock
cylinder
Status
1Blue N.O.
2Yellow N.C.
3White COM
SM Male connector SM female connector
2PIN 3PIN
Open circuit when unlocked.
Short circuit when latched.
73 mm 35 mm
3 mm
19.7 mm
4.8 mm
67 mm
38 mm
13 mm
20 mm
37 mm
6 mm
61 mm
20 mm
5 mm
4.8 mm
Ø 4.3mm
Ø 4.3mm
3
1.6 mm
28±0.3 mm
Screw thread
Size M4
Screw thread
Size M4
Screw thread
Size M4
Contents
AR-1213P Specication Features
1Product Voltage : 12V
Working Current: 2A
Power Consumption: 24W
Duty Cycle: 10% (Power-on time for unlocking is
0.2 secs and power-o time is 1.8 secs)
Type : Fail-Secure
Cycle Time : 500,000 times
Yield Strength: approx. 65 N/mm2 (7KG/mm2)
Pin Length : 20 mm
Dimension : 73(H)x14(W)x67(D)(mm)
Weight : approx. 185 (g)
Temperature : -20℃ ~ +55℃
Front View
Top View
Side View
The AR-1213P electric cabinet lock
is a perfect design for cabinets
having either swing or sliding
doors. The cabinet lock can be
surface mounted either vertically
or horizontally and oers maximum
exibility for ease of installation.
AR-1213P can also controlled by
any existing access control system
with multiple cabinet applications
such as mail-box and club lockers.
Pitch:2.54 mm Pitch:2.54 mm
(The screw is not included)
AR-1213P Electric Cabinet Lock
V230714
ACCESS & INDUSTRIAL CONTROL
Emergency unlocking during power outage
Operating steps:
Insert a hex key through the mail slot into the mailbox. Triggering the "Emergency door release lever" downward
will disengage the door latch on the door panel, opening the
cabinet door.
1 2
8888
8888
Installation Instruction
M4 screw
(to be provided
by the user)
M4 screw
(to be provided
by the user)
M4 screw
(to be provided
by the user)
M4 screw
(to be provided
by the user)
M4 screw
(to be provided
by the user)
Z bracket (to be provided by the user)
Emergency
door release
lever
Emergency
door release
lever
Z bracket
(to be provided
by the user)
Installation box (to be provided by the user) Installation box (to be provided by the user)
Method :
Prepare a Z bracket by yourself and secure
the lock onto the bracket.
Method :
Prepare the installation box by yourself and follow the installation steps below to
secure the lock onto the mailbox.
1 2
Application
Mailbox application
The cabinet lock can be surface mounted
either vertically or horizontally and offers
maximum exibility for ease of installation.
/
