Copyright January 21, 2021
Jim M. Bagley, GraceWood, Inc
(Reproduction Prohibited)
Version 1.2
9-PIECE
FOOT ATTACHMENT SET
Phone- 1-800-264-0644
www.graceframe.com
• Glide Foot
• Couching Foot
(Small, Medium, Large)
• Square Foot
• Diamond Foot
• Round Echo Feet
(3/4 in, 1 in, 1 1/2 in)
9-PIECE
FOOT ATTACHMENT SET
6 36343 17179 6
• Glide Foot
• Couching Foot
(Small, Medium, Large)
• Square Foot
• Diamond Foot
• Round Echo Feet
(Small, Medium, Large)
9-PIECE
FOOT ATTACHMENT SET
9-PIECE
FOOT ATTACHMENT SET
COMPATIBLE WITH
&
6 36343 17179 6
&
COMPATIBLE WITH
,
Couching Insert Is used for adding couched embellishments to your fabric and to easily add a
decorative stitch.
M3 x 8mm SBHCS
A A
B B
2
2
1
1
DO NOT SCALE DRAWING
M3 Thumb Screw
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 4:1
WEIGHT:
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
APPLICATION
USED ON
NEXT ASSY
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
Accessory
Presser Foot
Couching
Insert Small
Couching Insert
Medium
Couching Insert
Large
Parts List:
Tools Needed: 3mm Allen Wrench.
Accessory Presser Foot Is used for attaching the different types of inserts depending on what style
of sewing you desire.
Glide Insert Is used to easily glide around applique embellishments, or other dimensional elements
on a quilt.
Glide Insert
Hopping Foot
Height Gauge
Accessory Feet
2
Unlocked
1. Attach each insert by pressing each insert
on from the bottom of the Accessory Foot.
2. When the insert has been pushed in firmly
twist the insert until it snaps in place.
Accessory Foot
Square Insert Is used for quilting around rulers for straight and angled lines.
Echo Insert Is used for echo quilting around rulers for equal spacing.
Echo Insert .75 in
Square Insert Diamond Insert
Echo Insert 1 in
Echo Insert 1.5 in
Parts List Continued:
Tools Needed: 3mm Allen Wrench.
Attaching Accessory Feet
Locked
3
2. Attach the Accessory
Presser Foot insert on to
the machine and attach
loosely the M3 x 8 mm
SBHCS clockwise using
the 3mm allen wrench.
3. Set hopping foot height:
move the machine off
of the fabric and drop
the needle to the lowest
position. Slide the the
Hopping Foot Height Tool
beneath the foot. Tighten
the M3 x 8 mm SBHCS
with the 3 mm Allen
wrench.
A A
B B
2
2
1
1
DO NOT SCALE DRAWING
sewing machine
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:12
WEIGHT:
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
APPLICATION
USED ON
NEXT ASSY
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
1. To remove the Standard
Presser Foot take the
3mm allen wrench and
turn it counterclockwise
and remove the M3 x
8 mm SBHCS and the
presser foot.
Accessory
Presser Foot
Standard
Presser Foot
M3 x 8 mm SBHCS
M3 x 8 mm SBHCS
Hopping Foot
Height Tool
Attaching Accessory Presser Foot
4
1. Start in the front of your fabric, do needle up and down so Bobbin Thread can
be pulled through fabric.
2. Hold Sewing Thread and move Sewing Machine to pull Bobbin Thread up
through the fabric.
Threading Couching Foot
Bobbin Thread
Sewing Thread
5
3. Loop the Specialty Thread behind the Sewing Thread so that the two strands
are facing toward you. Pull Specialty Thread slightly so it is in front of the
needle. Do a needle up and down to create an anchor point.
Sewing Thread
Sewing Thread
Specialty Thread
Specialty Thread
6
Note: If it is to hard to pull the Specialty Thread through the Couching Foot try
using a bigger size Couching Foot. If Specialty Thread isn’t catching stitches in
corner use a smaller Couching Foot.
4. While holding both Sewing Thread and Bobbin Thread, move the Sewing
Machine away from you to pull the Specialty Thread through the Couching Foot.
Bobbin Thread
Sewing Thread
Bobbin Thread
Sewing Thread
Couching Foot
Couching Foot
Specialty Thread
Specialty Thread
7
5. Thread the longer Specialty Thread strand in the Thread Guide.
Note: Leave slack in the Specialty Thread for best quality stitching.
Specialty Thread
Thread Guide
8
/
