2. Computers & electronics
  3. Audio & home theatre
  4. Headphones
  5. Blueant
  6. Q2

Blueant Q2 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Blueant Q2 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Q2 QUICK START GUIDE
Read Me to Get Started Quickly...
1. Charge your Q2 until the indicator light turns white (a full
charge takes 3-4 hours).
2. Slide the power switch across to turn the Q2 on.
3. Put it in your ear and follow the instructions.
CALLER NAME ANNOUNCE
Vol -
Vol +
Multi-Function
Button (MFB)
Microphones
Indicator
Light
Charging
port
Hardware
power switch
(off position)
Accept connection request
from BlueAnt Q2?
YES
NO
Don’t ask this again
Phonebook Access Request
swipe over the
message and
accept the request
BlackBerry devices—select “Don’t
ask this again”, then “YES”:
PAIR CODE: 0000
Android devices—a notification
appears at the top of the screen:
LET’S GET STARTED...
Once pairing is complete your Q2 will transfer the contacts from
your phonebook so that it can announce caller names.
If your phone prompts you to allow a connection to the Q2, you
must select “YES” or “OK”:
Simply click the MFB, wait for the Q2 to ask you to Say A
Command, then say one of the voice commands:
This guide is just to get your started:
> To get the most out of your Q2, read the full user manual.
> Check the information in the enclosed safety booklet.
> Visit www.blueantwireless.com for online help, support and
troubleshooting tips.
VOICE DIALINGUSE YOUR VOICE TO CONTROL YOUR Q2
Use the command Phone
Commands to activate your phone’s
voice dial feature.
Your phone must support “voice
dialing over Bluetooth”.
This feature is supported by the
iPhone 3GS (iOS 3.1+) and iPhone
4, most BlackBerry smartphones,
and most Android devices running
Android 2.2 and above.
Once you have activated the
voice dial feature, you are using
your phone’s voice recognition
software.
Please check your phone manual
for help on getting the most out of
this feature and to find out what
commands your phone supports,
as well as any limitations of your
phone’s voice recognition software.
HELP AND SUPPORT
> Am I Connected?
> Call Back
> Cancel
> Check Battery
> Favorites
> Pair Me
> Phone Commands
> Redial
> Sensitivity Level
> LED Light
> Update Phonebook
> What Can I Say?
“HOW-TO VIDEOS FOR YOUR BLUEANT DEVICE”
NEED MORE HELP?
www.blueantwireless.com/geekspeak
Version: Q2-QSG-EN-2.0
/