Polycom ViaVideo User manual

Brand: Polycom

Model: ViaVideo

Category: Bridge cameras

Type: User manual

ViaVideo User’s Guide

November 2000 Edition

3151-10065-005A

ViaVideoUG.book Page 1 Thursday, December 7, 2000 2:49 PM

ViaVideoUG.book Page 2 Thursday, December 7, 2000 2:49 PM

Important Information

No part of this document may be reproduced or transmitted in any form or by any means, electronic or

mechanical, for any purpose, without the express written permission of Polycom, Inc.

Polycom, Inc. retains title to, and ownership of, all proprietary rights with respect to the software

contained within its products. The software is protected by United States copyright laws and international

treaty provision.

Every effort has been made to ensure that the information in this manual is accurate. Polycom, Inc. is not

responsible for printing or clerical errors. Information in this document is subject to change without notice.

Other Restrictions

You shall not allow any third party to decompile, disassemble, or otherwise reverse-engineer or attempt

to reconstruct or discover any source code or underlying ideas or algorithms of the software by any means

whatsoever.

Trademark Information

Polycom

, the Polycom logo design, ViewStation

, and ViaVideo

are either registered trademarks or

trademarks of Polycom, Inc.

Microsoft

, Windows

, NetMeeting

, and DirectX

are either registered trademarks or trademarks of

Microsoft Corporation. Adobe Acrobat Reader

is a trademark of Adobe Systems Incorporated.

Pentium

is a registered trademark of Intel Corporation.

ViaVideo contains Macromedia Flash Player Software by Macromedia, Inc.,

Flash are trademarks of Macromedia, Inc.

All other brand and product names are trademarks or registered trademarks of their respective companies.

Patent Information

The accompanying product is protected by one or more U.S. and foreign patents and patents pending held

by Polycom, Inc.

Warranty

Polycom, Inc. warrants its products to be free of defects in materials and factory workmanship for a period

of twelve (12) months from the date of purchase. This warranty does not apply to damage to products

resulting from accident, misuse, service or modification by anyone other than a Polycom, Inc. authorized

service facility/dealer. The warranty is limited to the original purchaser and is not transferable. Any

liability of Polycom, Inc. or its suppliers with respect to the product or the performance thereof under any

warranty, negligence, strict liability or other theory will be limited exclusively to product repair or

replacement as provided above. Except for the foregoing, the product is provided “as is” without warranty

of any kind including without limitation, any warranty of merchantability or fitness for a particular

purpose. The entire risk of the quality and performance of the software programs contained in the system

is with you.

Limitation of Remedies and Damages

Polycom, Inc., its agents, employees, suppliers, dealers and other authorized representatives shall not be

responsible or liable with respect to the product or any other subject matter related thereto under any

contract, negligence, strict liability or other theory for any indirect, incidental, or consequential damages,

including, but not limited to loss of information, business, or profits.

The law of certain states or nations does not permit limitation or exclusion of implied warranties and

consequential damages, so the above limitations, disclaimers, or exclusion may not apply to you. This

warranty gives you special legal rights. You may also have other rights that vary by state and nation.

ViaVideoUG.book Page 3 Thursday, December 7, 2000 2:49 PM

Important Safeguards

Read and understand the following instructions before using the system:

• Close supervision is necessary when the system is used by or near children. Do not leave unattended

while in use.

• Only use electrical extension cords with a current rating at least equal to that of the system.

• Always disconnect the system from power before cleaning and servicing and when not in use.

• Do not spray liquids directly onto the system when cleaning. Always apply the liquid first to a static

free cloth.

• Do not immerse the system in any liquid or place any liquids on it.

• Do not disassemble this system (except as instructed in the manufacturer's instructions). To reduce the

risk of shock and to maintain the warranty on the system, a qualified technician must perform service

or repair work.

• Keep ventilation openings free of any obstructions.

• Save these instructions.

Regulatory Notices

FCC Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorientate or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer for help.

Changes or modifications not expressly approved by Polycom could void the user's authority to operate

this equipment. If you experience trouble with this equipment, please contact your equipment provider for

repair/warranty information. If your equipment is causing harm to the telephone network, the telephone

company may request that you disconnect the equipment until the problem is resolved.

There are no user serviceable parts inside the ViaVideo or power supply.

Underwriters’ Laboratories’ Statement

The system is intended to be powered only by the supplied power supply unit.

RADVision Statement

ViaVideoUG.book Page 4 Thursday, December 7, 2000 2:49 PM

Contents

ViaVideo Quick Start

System Requirements and Installation............................................................. 1

Hardware Requirements ..................................................................... 1

Software Requirements....................................................................... 2

Installing Software............................................................................... 2

Installing Hardware ............................................................................. 2

Starting ViaVideo ............................................................................................. 3

Turn on the Camera ............................................................................ 3

Initial Setup ......................................................................................... 4

Camera Calibration ............................................................................. 6

Placing a Call ................................................................................................... 6

Using Manual Dialing .......................................................................... 6

Using the Address Book or Speed Dialing .......................................... 9

On-Screen Remote Control................................................................. 11

Ending a Call.................................................................................................... 12

Answering Calls ............................................................................................... 12

Closing ViaVideo.............................................................................................. 13

Using ViaVideo

Calling Features ............................................................................................... 15

Using the Remote Control................................................................... 16

Window Controls ................................................................................. 18

Picture in Picture (PIP)........................................................... 18

Minimize Window ................................................................... 18

Information Screen Access .................................................... 18

Re-Size the ViaVideo Display ................................................ 19

Sending Snapshots ............................................................................. 19

Leaving a Callback Message ................................................. 20

Address Book and Speed Dial ........................................................................ 21

Using the Address Book...................................................................... 21

Local and Global Address Book Entries................................. 23

Using Speed Dial ............................................................................................ 26

Controlling Audio and Video............................................................................. 27

Controlling Audio................................................................................. 27

Via the On-Screen Remote .................................................... 27

Via the Audio Screen ............................................................. 28

Muting Video ....................................................................................... 29

Collaboration and Application Sharing ............................................................ 31

Multiple IP Addresses ...................................................................................... 31

ViaVideoUG.book Page v Thursday, December 7, 2000 2:49 PM

Contents

ViaVideo User’s Guide vi www.polycom.com

System Information and Diagnostics

Using the System Information Screens ............................................................ 33

Diagnostics....................................................................................................... 35

Network Statistics................................................................................ 36

Advanced Statistics ............................................................................. 37

Call Status ........................................................................................... 38

Reset System ...................................................................................... 39

Camera Calibration ............................................................................. 40

Generate Tone .................................................................................... 41

Setup ................................................................................................................ 42

General................................................................................................ 43

Directory Services ............................................................................... 45

LAN and Internet ................................................................................. 46

Audio ................................................................................................... 48

Software .............................................................................................. 50

PC Software ........................................................................... 50

ViaVideo Software.................................................................. 50

H.323 Setup ........................................................................................ 51

H.323...................................................................................... 52

Gatekeeper............................................................................. 54

Dialing Speeds ....................................................................... 55

Quality of Service and Firewalls ............................................. 56

Audio Connection

PC with Speakers............................................................................................. 59

PC with Headphones ....................................................................................... 60

Headphones Only ............................................................................................ 61

Headset with Attached Microphone ................................................................. 62

Network Connection

Pick Your Connection Type.............................................................................. 63

Simple Connection - Just a Modem, Thanks....................................... 63

Router With NAT, No Firewall ............................................................. 64

Router With Firewall ........................................................................... 64

Router With Firewall, Using a DMZ ..................................................... 64

Through a Virtual Private Network ...................................................... 65

Configure Your Connection .............................................................................. 65

Simple Connection - Just a Modem, Thanks....................................... 65

Router With NAT, No Firewall ............................................................. 65

Router With Firewall ........................................................................... 66

Configure your ViaVideo for NAT ........................................... 66

Open and Assign Ports in the Firewall ................................... 67

ViaVideoUG.book Page vi Thursday, December 7, 2000 2:49 PM

Contents

Router With Firewall, Using a DMZ..................................................... 68

Configure Your ViaVideo for NAT .......................................... 69

Assign your ViaVideo to the DMZ .......................................... 69

Through a Virtual Private Network ...................................................... 70

What’s a Firewall?............................................................................................ 72

Opening Ports ..................................................................................... 73

Port Number Assignation ....................................................... 73

Is it Safe? ............................................................................... 73

What’s a DMZ? ................................................................................................ 74

What’s a Network Address Translator?............................................................ 75

Troubleshooting

General Troubleshooting.................................................................................. 77

Audio Troubleshooting ..................................................................................... 78

Video Troubleshooting ..................................................................................... 80

Error Messages ............................................................................................... 82

Installation Errors ................................................................................ 82

H.323 Errors........................................................................................ 82

ViaVideoUG.book Page vii Thursday, December 7, 2000 2:49 PM

Contents

ViaVideo User’s Guide viii www.polycom.com

ViaVideoUG.book Page viii Thursday, December 7, 2000 2:49 PM

ViaVideo Quick Start

This chapter explains how to get started with the Polycom

ViaVideo

desktop video communications system. The chapter

describes:

• System Requirements and Installation (page 1)

• Starting ViaVideo (page 3)

• Placing a Call (page 6)

• Ending a Call (page 12)

• Answering Calls (page 12)

• Closing ViaVideo (page 13).

System Requirements and Installation

Hardware Requirements

These are the minimum system hardware requirements:

•USB port

• 350 MHz processor, Pentium

II compatible with MMX

• 64 MB RAM

• 4 MB video memory

• 150 MB available hard disk space (might be considerably less

depending on whether you have the required software already

installed)

• SVGA monitor (800 x 600)

• 16-bit color or higher

• Desktop PC with headphones, headset, or external speakers

required

Laptop PC with headphones, headset, or internal speakers

required

• Broadband IP network access (32 KB and above).

ViaVideoUG.book Page 1 Thursday, December 7, 2000 2:49 PM

Chapter 1 ViaVideo Quick Start

ViaVideo User’s Guide 2 www.polycom.com

• If you are using a headset with microphone, it must have a single

audio connection, like those used with cellular phones.

Software Requirements

To use ViaVideo, you must have one of the following versions of

Microsoft

Windows

installed:

• Windows 98 version 1 or version 2

• Windows Millennium Edition

• Windows 2000.

As part of the installation process, ViaVideo also checks for the

following required software. If the software is not present, ViaVideo

installs it.

•DirectX

• Adobe Acrobat Reader

version 4

• Microsoft database support (ODBC)

• NetMeeting

3.01.

Installing Software

To install the ViaVideo software, insert the ViaVideo CD into your

CD drive and click Install Software. Follow the instructions in the

installation screens to complete the installation.

Note If your PC is not set up to autorun the CD, double-click

vvsetup.exe

to run the installation program.

Installing Hardware

Caution Be sure to install the ViaVideo software before you install the ViaVideo

camera unit.

To install the ViaVideo camera unit, insert the ViaVideo CD into your

CD drive and click the Install Hardware link. You are guided through

the installation procedures step by step.

Note For more information about audio port connections, see

“Audio Connection,” on page 59.

ViaVideoUG.book Page 2 Thursday, December 7, 2000 2:49 PM

Chapter 1 ViaVideo Quick Start

Starting ViaVideo

The ViaVideo application and camera unit work together to provide

an unparalleled experience in conference room quality video

communications on your desktop. The ViaVideo camera unit

combines a camera and high-performance multi-media processor,

which performs all audio encoding and decoding, and video

encoding. This leaves the PC free to perform normal tasks while

ViaVideo is running, even if you are in a call.

Turn on the Camera

To start ViaVideo:

1. Turn the camera unit on using the slider switch in the front of the

unit.

If your camera is installed correctly, the status indicator light

blinks green, indicating that the camera unit is ready to receive

the software upload.

The switch on the front of the ViaVideo camera unit has three

positions:

On: Turns the camera unit on.

Video Mute: Blocks the camera unit lens. This does not

mute the camera unit’s audio. For more

ViaVideoUG.book Page 3 Thursday, December 7, 2000 2:49 PM

Chapter 1 ViaVideo Quick Start

ViaVideo User’s Guide 4 www.polycom.com

information, see “Muting Video,” on page

29.

Off: Turns the camera unit off.

Because a substantial portion of the ViaVideo software is

uploaded to the camera unit when you start the application, the

camera unit should be turned on before you start the

application.

2. Start the ViaVideo application by double-clicking the ViaVideo

icon on your desktop.

Initial Setup

The first time the ViaVideo application starts, it presents a series

of user setup dialogs:

a. User Information Provide the following essential

information:

Name: The name you enter in this field is

displayed in your caller identification, as

well as your listing in the address books of

users registered with your Internet

Locator Service (ILS) or Global Address

Book (GAB) server.

E-Mail Address: This E-Mail address is displayed in your

caller identification information.

Country: Select your country. ViaVideo uses this

setting to display the correct product

version.

b. Microphone Setup - Specify which type of microphone

setup you are using:

ViaVideo built-in microphone:

Select this setting if you are using

headphones or your PC’s speakers (not a

headset with attached microphone). This

setting is the default, and activates the

ViaVideo camera unit’s microphone

(located on top of the camera unit). This

microphone is directional (oriented

towards the face of the camera unit), and

sensitive enough to use where other

manufacturers’ cameras might require a

headset microphone.

ViaVideoUG.book Page 4 Thursday, December 7, 2000 2:49 PM

Chapter 1 ViaVideo Quick Start

Headset with microphone:

Select this setting only if you are using a

headset with an attached microphone

plugged into the audio out port in the back

of the ViaVideo camera unit.

This setting turns off the internal ViaVideo

microphone.

Note: If you have an external microphone attached to the

microphone port in the back of your PC, ViaVideo

ignores it and uses the ViaVideo camera unit’s

internal microphone.

For more information about the different audio connections,

see “Audio Connection,” on page 59.

c. Global Address Book Registration - Specify if you want to

server, another ILS server, or neither.

If you are registering with a GAB server or ILS server, enter

the server’s IP address in the field provided.

When you register with a GAB or ILS server, other

registered users can see your user information displayed as

a global listing in their address books, and can use that

listing to place calls. Likewise, if you are registered with the

same ILS server as other users, their listings are displayed

in your address book as global listings.

For more information about the Global Address Book and

ILS servers, see “Using the Address Book,” on page 21 and

“Directory Services,” on page 45.

If you choose not to register with either Polycom’s GAB or

another ILS server, you can still place calls manually, and

save those addresses, both in the Speed Dial screen, and

as local addresses in your address book. For more

information, see “Placing a Call,” on page 6.

When you complete the ViaVideo setup procedures, the

indicator light on the ViaVideo unit blinks green as the ViaVideo

application loads instructions to the camera unit. Once this

process is finished, ViaVideo presents the main screen, from

which you can place and receive calls.

ViaVideoUG.book Page 5 Thursday, December 7, 2000 2:49 PM

Chapter 1 ViaVideo Quick Start

ViaVideo User’s Guide 6 www.polycom.com

3. As a final step, use the focus knob on top of the ViaVideo

camera unit to get a clear image in the main screen’s near video

window (displayed whenever you are not in a call). Turn the knob

to the right to focus on objects further away from the lens, and

to the left for closer objects.

Note If the ViaVideo application presents the main screen, but an

animation is displayed in the near video window, check to

make sure that your camera unit is turned on, and that the

power and USB cables are connected correctly. For more

information, see “Troubleshooting,” on page 77.

Camera Calibration

After your ViaVideo camera unit has been turned on for 1/2 hour or

more, ViaVideo presents the Camera Calibration screen in the

application window so that you can calibrate the camera for low light

settings. Once your camera has been calibrated, you will not need

to calibrate again unless you move the camera unit to a new

computer.

To calibrate your camera:

1. Slide the camera switch to the Video Mute position.

ViaVideo performs the calibration immediately once the switch

is in the Video Mute position.

2. ViaVideo notifies you when calibration is complete. This should

take just a few moments.

3. Slide the camera switch back to the On position.

You can also calibrate your camera manually in the Camera

Calibration screen (System Info>Diagnostics>Camera Calibration).

Placing a Call

This section describes how to dial a call:

• Using Manual Dialing

• Using the Address Book or Speed Dialing.

Using Manual Dialing

This section explains how to make a call by dialing the far site IP

number manually.

ViaVideoUG.book Page 6 Thursday, December 7, 2000 2:49 PM

Chapter 1 ViaVideo Quick Start

Note Before you start the ViaVideo application, be sure your

camera unit is turned on.

1. Double-click the ViaVideo icon to launch the ViaVideo

application.

The ViaVideo application’s main screen is displayed, with near

video showing in the Place Call window.

If the ViaVideo application presents the main screen, but an

animation is displayed in the near video window, make sure that

your camera unit is turned on and that the power and USB

cables are connected correctly. For more troubleshooting

information, see “Troubleshooting,” on page 77.

2. Click Place Call in the main screen.

The manual calling screen is displayed, with local video in the

video window.

3. The Speed icon shows the selected line speed.

To select a line speed, click Speed and select the speed you

want to use from the choice bar that is displayed on the left.

For better video quality, select a higher speed if you have the

network bandwidth available to support the higher transfer rate.

Info icon

On-screen help icon

Window controls

IP address

Call status light

ViaVideoUG.book Page 7 Thursday, December 7, 2000 2:49 PM

Chapter 1 ViaVideo Quick Start

ViaVideo User’s Guide 8 www.polycom.com

To conserve network bandwidth, select a lower speed.

For more information about choosing line speeds, see “Dialing

Speeds,” on page 55.

4. Use your keyboard or the number buttons on the number pad to

enter the IP number, and click Call.

5. While the call is connecting, ViaVideo shows the name and IP

address of the party you are calling, and the calling speed. A call

progress indicator is displayed on the lower left of the screen to

indicate that the call is connecting. The progress indicator

changes progressively to blue, yellow, orange, and green as

your call completes.

Blue Ringing, attempting connection to far site

Yellow Far site reached, waiting for answer

Orange Negotiating data transfer

Green Connected

6. Once your call is connected, ViaVideo shows the far site video,

and the on-screen remote is displayed to the right of your

screen. For more information about how to use the on-screen

remote, see “Using the Remote Control,” on page 16.

Note If the call does not go through, one of the following

messages is displayed:

ViaVideoUG.book Page 8 Thursday, December 7, 2000 2:49 PM

Chapter 1 ViaVideo Quick Start

Network Error The far site does not answer. There is

either a network error, or more likely, the

far site is not activated.

Far Site Busy The far site is currently in a call.

Using the Address Book or Speed Dialing

This section explains how to make a call using the address book and

speed dial features of ViaVideo.

Note Before you start the ViaVideo application, be sure your

camera unit is turned on.

1. Double-click the ViaVideo icon to launch the ViaVideo

application.

The ViaVideo application’s main screen is displayed, with near

video showing in the Place Call window.

If the ViaVideo application presents the main screen, but an

animation is displayed in the near video window, make sure that

your camera unit is turned on, and that the power and USB cables

Info icon

On-screen help icon

Window controls

IP address

Call status light

ViaVideoUG.book Page 9 Thursday, December 7, 2000 2:49 PM

Chapter 1 ViaVideo Quick Start

ViaVideo User’s Guide 10 www.polycom.com

are connected correctly. For more information, see

“Troubleshooting,” on page 77.

2. Click Address Book or Speed Dial. This presents the Address

Book screen.

The speed dial screen is actually part of the address book. To

access speed dial entries, click the top tab on the right of the

Address Book screen.

To place a call from the address book:

a. Highlight an entry in the Address Book screen.

b. Click Call or double-click on the entry.

ViaVideo presents the calling screen.

For more information about the Address Book screen, see

“Using the Address Book,” on page 21.

The Speed Dial screen shows the last twelve numbers you have

dialed. To place a call using speed dial, you must first have made

a call, either manually or using the address book, for the entry

to appear in the Speed Dial screen.

To place a call using speed dial:

Line speed

Polycom ViaVideo User manual

Brand: Polycom

Model: ViaVideo

Category: Bridge cameras

Type: User manual

Download PDF

report

Polycom ViaVideo User manual

Polycom ViaVideo User manual

Related papers

Other documents