Cateye Padrone Smart+ [CC-SC100B] User manual

Category
Bicycle accessories
Type
User manual

This manual is also suitable for

Usage Instructions
For troubleshooting related to the smart computers or to Cateye Cycling™, see "Frequently
Asked Questions".
* For explanatory purposes, in this manual red text/icons on the smart computer screen
represent flashing items.
* The display screens and illustrations used in this manual are provided for instructional
purposes only. Actual screens and illustrations may differ depending on devices used.
* The online manual and YouTube videos for this product are subject to change without
notice.
To use Padrone Smart+, the “Cateye Cycling™” smartphone application (free of charge) is
required.
For the latest information on the smartphones that are compatible with Cateye Cycling™
operations, see “Cateye Cycling™ Recommended Devices”.
Setup Flowchart
Usage Instructions
5. Mounting the bracket
6. Mounting the speed (cadence) sensor
(ISC-12)
(Optional)
7. Wearing the heart rate sensor (HR-12)
(Optional)
3. Pairing with smart computer
4. Pairing with a sensor
(If you have sensors)
2. Install Cateye Cycling™
1. Checking package contents
The setup procedure is as follows.
After setup is complete, please see How to Use.
1. Checking package contents
Setup Flowchart
! Smart computer unit
! Accessories
Bracket band
Bracket
Bracket rubber pad
Dial
* The Speed + Cadence Kit includes an integrated speed (cadence) sensor (ISC-12) in
addition to the items above.
* The Triple Wireless Kit includes an integrated speed (cadence) sensor (ISC-12) and a heart
rate sensor (HR-12).
* Check button locations before starting set up.
5. Mounting the bracket
3. Pairing with smart computer
4. Pairing with a sensor
(If you have sensors)
2. Install Cateye Cycling™
Usage Instructions
6. Mounting the speed (cadence) sensor
(ISC-12) (Optional)
7. Wearing the heart rate sensor (HR-12)
(Optional)
5. Mounting the bracket
3. Pairing with smart computer
4. Pairing with a sensor
(If you have sensors)
2. Install Cateye Cycling™
1. Checking package contents
Setup Flowchart
1. Install Cateye Cycling™.
If using an iPhone
If using an Android smartphone
* See Cateye Cycling Recommended Devices for the latest information about
smartphones recommended for use with Cateye Cycling™.
2. Launch Cateye Cycling™.
Follow the on-screen instructions and allow the use of GPS and Bluetooth® devices.
Once basic settings are complete the Trip screen appears.
To continue, refer to "Pairing with smart computer".
When the smartphone's Bluetooth settings are turned on, it will search for devices, but
do not configure settings at this stage. Switch to Cateye Cycling™ and follow the
procedure below.
Important
Smartphone
Install the Cateye Cycling™ smartphone app (free) on the smartphone to be used.
Usage Instructions
6. Mounting the speed (cadence) sensor
(ISC-12) (Optional)
7. Wearing the heart rate sensor (HR-12)
(Optional)
3. Pairing with smart computer
2. Install Cateye Cycling™
1. Checking package contents
Setup Flowchart
• Pairing is necessary to use a smart computer or a sensor.
• Do not pair sensors at a race venue or in similar locations where there are a lot of other
users.
Doing so may cause the smart computer to be paired with another device.
Important
The following section explains how to format (initialize) the smart computer and then pair with
a smartphone.
Smart computer
1. Pull free the smart computer's insulation sheet.
After pulling out the insulation sheet, return the battery holder and battery cover to their
previous locations.
2. Press the AC button on the smart computer.
The initialization screen is displayed.
Open
Close
Insulation
sheet
Battery holder
The display switches to the smartphone search screen.
Smartphone
4. From (MENU) at the top left of the screen, turn on [Connect] and tap
[Device].
Tap [Pair to Device] to start pairing.
When Cateye Cycling™ detects smart computer, a message is displayed on the
smartphone.
Tap [Pairing] to complete pairing.
* Tap [Smart computer name] to display the settings configuration screen for the various
smart computer settings.
Device
Smart computer pairing is now complete.
If you have sensors, proceed to "Pairing with a sensor". If you do not have sensors, skip to
"Mounting the bracket".
3. Press MODE once to cause [FORMAT] to blink, and then press MODE for
1 second.
All data will be deleted and smart computer will be reset to factory default settings.
Caution
Confirm
(1 second)
Usage Instructions
5. Mounting the bracket
6. Mounting the speed (cadence) sensor
(ISC-12) (Optional)
7. Wearing the heart rate sensor (HR-12)
(Optional)
4. Pairing with a sensor
(If you have sensors)
3. Pairing with smart computer
4. Pairing with a sensor
(If you have sensors)
2. Install Cateye Cycling™
1. Checking package contents
Setup Flowchart
Tap [Pair to Device] to start pairing.
2. Activate the sensor.
Activating the sensor
When Cateye Cycling™ detects the sensor signal, a message is displayed on the
smartphone.
Tap [Pair]. The synchronized sensor is displayed on the [Device] screen and pairing is
completed.
* When pairing a sensor with Cateye Cycling™, an "A" is displayed after the sensor name.
* If you have paired a sensor capable of speed measurement, proceed to step 3.
• Pair all sensors that you intend to use.
When using an iPhone, you cannot sync settings of commercial sensors.
When measuring in Sensor Direct Mode, it is necessary to configure sensor settings
separately via smart computer.
1. Switching to Sensor Direct Mode
2. Pairing a smart computer with a sensor
3. Tire circumference setting
Important
Smartphone
1. Verify that [Connect] is set to ON in the (MENU), and then tap
[Device].
Smart computer can be used with sensors compatible with Bluetooth SMART. Pair it with
optional accessories or commercial sensors as required.
3. Set the tire circumference for a sensor capable of speed measurement.
Tap [Device], and then tap [Sensor name] > [Tire Circumference] (the length of the outer
circumference of the tire).
Select the tire circumference according to the tire size written on the side of the tire.
Determining tire circumference
* Default value: 2096 mm (700x23c)
* Requires to set tire circumference for each sensor.
* You can also change sensor names and cancel pairing from this screen.
Sensor pairing is now complete.
* If you want to pair another sensor, repeat the same procedure again.
Usage Instructions
5. Mounting the bracket
6. Mounting the speed (cadence) sensor
(ISC-12) (Optional)
7. Wearing the heart rate sensor (HR-12)
(Optional)
Cadence, heart rate, and power data will not be displayed under the initial configuration.
Change the measurement screen to be able to display measured values from paired
sensors.
Changing the measurement screen
Important
Switching to Sensor Direct Mode
Pairing with a sensor
Switch from Mirror Mode to Sensor Direct Mode.
Smartphone
1. Close Cateye Cycling™ or from (MENU), turn off [Connect].
Smart computer
2. From the smartphone search screen, press MODE for 1 second to switch
to Sensor Direct Mode.
* Smart computer will search for a sensor instead of your smartphone. In this mode, the
sensor icon flashes to indicate sensor reception status.
S (Flash): When the speed signal is received
C (Flash): When the cadence signal is received
S/C (S and C flash simultaneously): When the speed/cadence (ISC) sensor signal is
received
H (Flash): When the heart rate signal is received
P (Flash): When the power signal is received
Sensor Direct Mode and Mirror Mode measure independently and data has no
continuity.
Important
(1 second)
Smartphone search
screen
Measurement
screen
Pairing a smart computer with a sensor
Tire circumference setting
Switching to Sensor Direct Mode
Pairing a smart computer with a sensor
1. From the measurement screen, press OPTION for 2 seconds to switch to
the sensor pairing screen.
* When the sensor pairing screen is left on for 1 minute, the smart computer returns to the
measurement screen.
2. Press SS/LAP to start pairing.
3. Activate the sensor that you want to pair.
Activating the sensor
The name of the synchronized sensor is displayed and pairing is completed.
SP : Speed sensor
(2 seconds)
Sensor pairing
screen
Measurement
screen
Sensor
activated
Synchronizatio
n complete
Ready for
synchronization
Pairing with a sensor
• Pairing (sensor ID synchronization) must be performed in order to use a sensor.
• Do not pair sensors at a race venue or in similar locations where there are a lot of other
users. Doing so may cause the smart computer to be paired with another device.
• Pair all sensors that you intend to use.
• During pairing or when connected to a smartphone, if sensor information is stored in
Cateye Cycling™, this information is written to the smart computer.
Pairing with a sensor
Important
Pair a sensor that you want to use with smart computer.
ISC : Speed/cadence sensor
CD : Cadence sensor
HR : Heart rate sensor
PW : Power sensor
* When pairing a sensor with a smart computer, a "C" is displayed after the sensor
name.
Tire circumference setting
When the smart computer displays [ID FULL] on the screen and returns to the sensor
pairing screen, the maximum number of sensors have been paired.
Up to 9 separate sensor IDs can be paired with the smart computer.
If the maximum number of sensors have been paired, in the sensor pairing screen, press
OPTION for 4 seconds to clear all pairings.
Then re-pair the required sensors.
Important
* Pairing standby time is 5 minutes.
Activate the sensor within this time.
* If you want to pair another sensor, repeat steps 2 and 3.
4. Press OPTION to return to the measurement screen.
Pairing is now complete.
If you have paired a sensor capable of speed measurement, proceed with setting the tire
circumference.
Switching to Sensor Direct Mode
Pairing a smart computer with a sensor
Tire circumference setting
1. From the measurement screen, press OPTION for 2 seconds to switch to
the sensor pairing screen.
* When the sensor pairing screen is left on for 1 minute, the smart computer returns to the
measurement screen.
2. Select the sensor you want to set, and enter the tire circumference.
Enter the circumference in mm of the tire (the length of the outer circumference of the tire)
on which the sensor is installed.
(Setting range: 0100 – 3999 mm)
Determining tire circumference
(2 seconds)
Sensor pairing
screen
Measurement
screen
Pairing with a sensor
• Pairing (sensor ID synchronization) must be performed first.
Pairing a smart computer with a sensor
• Set tire circumference for each sensor.
The default value is 2096 mm (700x23c).
Important
Set the tire circumference for a sensor capable of speed measurement.
* Sensors that can be selected are those that have been paired with Cateye Cycling™ or
a smart computer. The letter that appears after the sensor name indicates how the
sensor was paired.
A : Sensor paired with Cateye Cycling™
C : Sensor paired with a smart computer
* Error is displayed if values outside the setting range are entered.
3. Press OPTION to confirm settings.
Pressing OPTION again returns to the measurement screen.
* If you have changed settings, always press OPTION to confirm changes.
This completes the tire circumference setting procedure.
Sensor
selection
(1 second)
(1 second)
Increase
numbers
Tire circumference
value
Move to
next digit
5. Mounting the bracket
3. Pairing with smart computer
4. Pairing with a sensor
(If you have sensors)
2. Install Cateye Cycling™
1. Checking package contents
The bracket can be mounted on either the stem or the handlebar.
Watch video
Setup Flowchart
Bracket band
Bracket
See illustrations
When mounting on the stem
When mounting on the handlebar
Mounting and removing the smart computer unit
! When mounting on the stem
1. Check bracket orientation and attach it to the bracket band.
2. Remove the seal from the bracket rubber pad and stick the bracket
rubber pad onto the bracket band.
! When mounting on the handlebar
1. Check bracket orientation and attach it to the bracket band.
Bracket
band
Bracket
2. Remove the seal from the bracket rubber pad and stick the bracket
rubber pad onto the bracket band.
Bracket
rubber pad
3. Loop the bracket band around the handlebar and tighten the dial to
secure it.
• Always tighten the dial by hand.
Using a tool or other object to tighten the dial may crush the screw thread.
• Trim bracket band carefully so the cut end will not cause injury (see step 3 above).
Caution
3. Loop the bracket band around the stem and tighten the dial to secure it.
Dial
Cut
Bracket
rubber pad
Click
Cut
• Always tighten the dial by hand.
Using a tool or other object to tighten the dial may crush the screw thread.
• Trim bracket band carefully so the cut end will not cause injury (see step 3 above).
Caution
Dial
To remove smart computer, push out while holding the unit with the other hand to ensure
that it does not fall.
Caution
! Mounting and removing the smart computer unit
Removing
Mounting
Usage Instructions
6. Mounting the speed (cadence) sensor
(ISC-12) (Optional)
7. Wearing the heart rate sensor (HR-12)
(Optional)
While holding smart computer
Push out
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160

Cateye Padrone Smart+ [CC-SC100B] User manual

Category
Bicycle accessories
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI