Legrand OverheadCablePathways Owner's manual

Type
Owner's manual
NOTES
MAXIMUM MOUNTED PATCH PANEL LOAD SHALL NOT EXCEED 50 LBS.1.
SEE SHEET 2 FOR MOUNTING OPTIONS TO CABLE TRAYS.2.
TITLE:
INSTRUCTION SHEET #: REV: ECN #: SHEET: DWN BY: DATE: CHK BY: DATE: APP. BY: DATE:
2/15/2017
ASSEMBLY INSTRUCTIONS
OR-71601927 00 1 of 2 JS 2/10/2017 JQ 2/10/2017 CV
Q-SERIES OVERHEAD RACK SYSTEM
WWW.LEGRAND.US
(2) CABLOFIL CABLE
TRAY MOUNTING
BRACKETS
SCREWS
MOUNTING
WASHERS
(8) SPLIT LOCK (8) PAN HEAD
MAIN BRACKET WELDMENT
2 POST OVERHEAD RACK
SYSTEM (2RU - 8RU SIZES)
TITLE:
INSTRUCTION SHEET #: REV: ECN #: SHEET: DWN BY: DATE: CHK BY: DATE: APP. BY: DATE:
Q-SERIES OVERHEAD RACK SYSTEM
ASSEMBLY INSTRUCTIONS
OR-71601927 00 2 of 3 JPS JQ 2/10/2017 CV 2/15/2017
WWW.LEGRAND.US
CABLE TRAY
TOP MOUNTING
STEP 2
DETERMINE THE MOUNTING POSITION OF THE UNIT. THE MOUNTING OPTIONS ARE: REAR TOP,
REAR MIDDLE, REAR BOTTOM, UNDERNEATH PARALLEL, UNDERNEATH PERPENDICULAR.
STEP 1
DETERMINE IF THE MOUNTING EQUIPMENT WILL MOUNT TO
EITHER A CABLE TRAY OR CEILING MOUNT
(THREADED RODS OR HANGERS NOT SUPPLIED).
CABLE TRAY
MIDDLE MOUNTING
CABLE TRAY
BOTTOM MOUNTING
UNDERNEATH PARALLEL
UNDERNEATH PERPENDICULAR
CABLE TRAY BRACKET
STEP 3
ONCE THE MOUNTING LOCATION IS DETERMINED, MOUNT 2 CABLE TRAY BRACKETS USING (8)
SPLIT LOCK WASHERS AND (8) PAN HEAD SCREWS.
CABLE TRAY BRACKETS
STEP 4
HANG ASSEMBLY ONTO CABLE TRAY WHERE REQUIRED.
INSTALLATION IS NOW COMPLETE.
TITLE:
INSTRUCTION SHEET #: REV: ECN #: SHEET: DWN BY: DATE: CHK BY: DATE: APP. BY: DATE:
Q-SERIES OVERHEAD RACK SYSTEM
ASSEMBLY INSTRUCTIONS
OR-71601927 00 3 of 3 JPS JQ 2/10/2017 CV 2/15/2017
WWW.LEGRAND.US
  • Page 1 1
  • Page 2 2
  • Page 3 3

Legrand OverheadCablePathways Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI