TM
QUICK INSTALLATION GUIDE
The ADS ECHO is a level monitoring system for use in overow prevention.
It measures ow depth in the manhole with echo ranging technology using
a single, high-powered transducer housed inside a tuned parabolic reec-
tor that reliably reads up to 20 feet (6.1 m) from the bottom of the reector.
Its pressure sensor measures depth above the ECHO up to and including
above the manhole rim.
The ECHO monitor is intrinsically safe. For further information on IS
certications and maintenance restrictions, please consult the ADS ECHO
Installation, Operation, and Maintenance Manual at
http://www.adsenv.com/manuals.
The following parts and tools are needed to complete this installation:
ECHO monitor, antenna, mounting bar, J-hook, rubber splicing tape,
carpenter’s rule, and grade pole. Follow the steps below to complete the
ECHO installation.
Measure the Manhole Depth
Install the Mounting Bar
ECHO Application
1.1 Measure Distance from the
Bottom of the Invert ...
1.2 to the Manhole Rim, and Record
the Manhole Depth Value
TM
Pressure
Sensor
Manhole
Depth
Ultrasonic
Sensor
2.1 Pass Mounting Bar Tether Behind
Top Rung
2.2 Use J-Hook to Pull Tether up from
Top Rung
2.3 Pass Untethered End Through
Large Loop
2.4 Pull Tether Tight, Cinching to the
Top Rung
2.5 Ensure Bar Installation Gives
Clear Line of Sight to the Invert
2.6 Expand, Level, and Conrm
Secure Positioning of Bar
NOTE: Install mounting bar at least 14 inches (355 mm) below the manhole rim to prevent the manhole lid from dislodging the bar and monitor.
2
1
Install the ECHO Monitor
QR 775032 A1
Manhole and sewer system work involves conned space entry and is inherently
dangerous. Therefore, installers and technicians should comply with all federal,
state, and municipal regulations concerning conned space entry.
3
3.1 Attach Antenna to ECHO and Wrap
Connection with Rubber Splicing Tape
3.2 Lower and Place ECHO on
Mounting Bar
3.3 Level the ECHO and Tighten the
Mounting Clamp
3.4 ECHO Fully Installed
3.6 Measure Distance from the Rim of
the Manhole to the Face of the Sensor,
Record the Physical Oset Value
NOTE: This ECHO Quick Installation Guide is available for download from the the ADS web-
site at http://www.adsenv.com/manuals. For conguration and activation information, consult
the ADS ECHO Qstart Quick Reference Guide at http://www.adsenv.com/manuals. For more
detailed information, please consult the ADS ECHO Installation, Operation, and Maintenance
Manual at http://www.adsenv.com/manuals or call customer support at 1-877-237-9585.
Watch the Video “How to Install the ADS ECHO Level Monitor”
Scan the QR code to access our instructional
video “How to Install the ADS ECHO Level
Monitor”. This video will guide you through
the installation of the ECHO.
http://www.adsenv.com/instructionalvideos
3.5 Ensure Installation of the ECHO
Places the Eective Section of the
Sensor Directly Over the Channel
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Hach 3314 Instrument Manual
-
Hach 940 User manual
-
Hach Flo-Dar User manual
-
-
-
Hach FL900 Series User Instructions
-
Milltronics MultiRanger Plus User manual
-
Rosemount TankRadar Rex Commissioning Owner's manual
-
-
