Enclume OWR3 HS Installation guide

Enclume
Brand
Enclume
Model
OWR3 HS
Category
Flat panel accessories
Type
Installation guide

This manual is also suitable for

Enclume OWR3 HS is the ultimate storage solution for your kitchen. With its sturdy construction and stylish design, this rack will keep your pots, pans, and other utensils organized and within reach.

The OWR3 HS comes with 12 Essentials Straight Pot Hooks – 36” bar, 8 Essentials Straight Pot Hooks – 30” bar, and 6 Essentials Straight Pot Hooks – 24” bar, so you can customize the rack to fit your specific needs. The hooks are made of durable steel and can hold up to 20 pounds each, so you can be sure that your cookware will be safe and secure.

Installing the OWR3 HS is easy. Simply mark the mounting holes on the wall, pre-drill the holes if necessary, and install the 1 1/2" wood screws directly into the wall studs. If you are mounting the rack into drywall, be sure to use the included toggle kit.

Enclume OWR3 HS is the ultimate storage solution for your kitchen. With its sturdy construction and stylish design, this rack will keep your pots, pans, and other utensils organized and within reach.

The OWR3 HS comes with 12 Essentials Straight Pot Hooks – 36” bar, 8 Essentials Straight Pot Hooks – 30” bar, and 6 Essentials Straight Pot Hooks – 24” bar, so you can customize the rack to fit your specific needs. The hooks are made of durable steel and can hold up to 20 pounds each, so you can be sure that your cookware will be safe and secure.

Installing the OWR3 HS is easy. Simply mark the mounting holes on the wall, pre-drill the holes if necessary, and install the 1 1/2" wood screws directly into the wall studs. If you are mounting the rack into drywall, be sure to use the included toggle kit.

WALL RACKS
(utensil bars)
OWR1, OWR2, OWR3
Enclosed you will find everything needed for the
installation and use of your storage rack. Two people
make installation easier.
Hardware included:
2 – 1 ½
"
Wood Screws
1 – Hex key
1 – Toggle Kit – ¼ x 20
Components included:
1–UtensilBar
12–EssentialsStraigh tPotHooks–36”bar
8–Essent ialsStraightPotHooks–30”bar
6–Essent ialsStraightPotHooks–24”bar

INSTALLATION INSTRUCTIONS
'
1)
Determine where you wish to mount your rack. Make sure you locate your wall studs if you want to mount into solid
wood. You will want to use a level (not included) to make sure that the rack is level. You may not be able to mount
both ends to a wall stud as they are typically spaced at 16". If it is not convenient to hang your rack directly into a wall
stud you may use the included DRYWALL anchors enclosed with your rack. See Toggler® brand manufacturer
recommendations for weight limits included in the instructions in the Toggler kit.
2)
Hold the bar against the wall in its desired location, mark the mounting holes. If installing into solid wood, you may
want to pre-drill holes.
Install the 1 1/2" wood screws directly into the wall studs through the holes on the wall rack (or use
the toggle instructions for drywall mount).
It is important that your rack is installed correctly. If the unit is installed or used incorrectly, it
could become unstable and collapse, possibly causing injury.
Warranty. This product is warranted to be free of material defects for a period of five years from the date of purchase.
Your exclusive remedy for breach of this warranty shall be the repair or replacement of the defective product when
delivered, postage prepaid, to Enclume Design Products at 24 Colwell St. Port Hadlock, WA. 98339. There is no other
warranty, expressed or implied, and there is specifically NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PORPOSE. In no event will Enclume Design Products be responsible for any incidental or consequential
damages related to use of this rack.
WARNING
Thank you for choosing Enclume!
Enclume racks are the ultimate quality,
design, strength and function.
WARNING:READALLOFTHE
INSTRUCTIONSBEFOREASSEMBLINGAND
USINGYOURRACK
If you need help, please call 1-877-ENCLUME
EnclumeDesignProducts
24ColwellStreet,PortHadlock,WA98339
Phone360‐385‐6100Fax360‐385‐6156
www.enclume.com
  • Page 1 1

Enclume OWR3 HS Installation guide

Enclume
Brand
Enclume
Model
OWR3 HS
Category
Flat panel accessories
Type
Installation guide
This manual is also suitable for

Enclume OWR3 HS is the ultimate storage solution for your kitchen. With its sturdy construction and stylish design, this rack will keep your pots, pans, and other utensils organized and within reach.

The OWR3 HS comes with 12 Essentials Straight Pot Hooks – 36” bar, 8 Essentials Straight Pot Hooks – 30” bar, and 6 Essentials Straight Pot Hooks – 24” bar, so you can customize the rack to fit your specific needs. The hooks are made of durable steel and can hold up to 20 pounds each, so you can be sure that your cookware will be safe and secure.

Installing the OWR3 HS is easy. Simply mark the mounting holes on the wall, pre-drill the holes if necessary, and install the 1 1/2" wood screws directly into the wall studs. If you are mounting the rack into drywall, be sure to use the included toggle kit.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents