Toro STORAGE BOX, UNDER HOOD User manual

  • Hello! I am an AI chatbot trained to assist you with the Toro STORAGE BOX, UNDER HOOD User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
NOTE: Read these installation instructions thoroughly before beginning. Retain these Installation
Instructions for future reference.
Arctic Cat
®
Prowler
Installation Instructions - Accessory Kit
Form No. 1453-092
Under Hood Storage Box Kit
(p/n 2436-246)
Kit includes:
p/n QTY DESCRIPTION
0417-014 6 Trim
0423-545 4 Shoulder Self-Tapping Screw
4506-037 1 Storage Box
8424-602 2 M6 Flange Nut
8476-616 2 M6 Machine Screw
1453-092 1 Instructions
1. Open the hood and remove the nine screws
securing the dash to the frame; then remove the
shift knob and pull the dash away from the
frame. See Fig. 1.
Fig. 1
ROV-514A
2. Remove the four screws securing the two hood
support brackets to the frame; then remove the
brackets. See Fig. 2.
Fig. 2
ROV-516A
3. Position Storage Box with the four mounting
locations from step 2 and the front two mount-
ing locations on the frame.
4. Install the six Trim pieces onto the rear raised
location on the storage box where the dash will
contact the box; then secure the box to the frame
using four Shoulder Self-Tapping Screws, two
M6 Machine Screws, and two M6 Flange Nuts.
Do not over-tighten. See Fig. 3.
Fig. 3
ROV-517A
5. Position the dash and secure using the existing
screws. Do not over-tighten. Close and latch the
hood.
Printed in the U.S.A. ®™Trademarks of Arctic Cat Inc., Thief River Falls, MN 56701 1214
1/1