Stratco Rivet Lock 5 Shelf Kit Installation guide

Hello! I've reviewed the Installation Guide for the STRATCO Rivet Lock Shelving Kit 5-Shelf Assembly. This document contains details on how to assemble the shelving unit, including a list of required components and step-by-step assembly instructions. I'm ready to answer any questions you have regarding the assembly process or features described in the guide.
What tool is required for assembly?

What is the purpose of the shelf supports?

Can the shelving unit be divided into two separate units?

Rivet Lock Shelving Kit

5-SHELF ASSEMBLY

INSTALLATION

GUIDE

2

COMPONENTS

TOOL REQUIRED

x5 x8 x10 x10 x8

TIMBER SHELF

LEG 900mm

SHELF RAIL LONG

SHELF RAIL SHORT

SHELVING FEET CAP

1x RUBBER MALLET

x10

SHELF SUPPORT (*1500mm WIDE UNIT ONLY)

3

ASSEMBLY

1

2

3

4

4

1

2

3

4

5

1

2

3

4

6

1

2

3

4

7

NOTE:

For the 1500mm wide unit you will need to install the two

supplied shelf supports on the long rail for each shelf.

8

NOTE:

Using another four feet caps, you can create two shelving units.

9

NOTES

BROCRS-5SHF

www.stratco.com.au

© Copyright June 2022 20/06/22

All brands and logos/images accompanied by ® or ™ are

trade marks of Stratco (Australia) Pty Limited.

CONTAC T

1300 165 165

NOTES

/

Related papers

Other documents