Page is loading ...
Pairing Manual Digital Door Lock 7100
with Hafele Smart Living Application
* The contents of this user manual are subject to change without prior notice to the user in
order to the user in order to enhance performance of products
EN USER MANUAL
Table of Contents
Add Gateway Device to LAN
Add Wireless Gateway (Zigbee) to WIFI
Pairing lock with Application
Basic functions
Remote door opening through mobile APP
Create temporary PIN code
Add users
Unlock records
Temporary PIN code function settings
Remote door function settings
01
03
05
08
09
10
11
13
14
16
01
Add Gateway Device to LAN
Go to Hafele Smart Living APP, click on “+” on
the right side or click on “Add Devices”
2
Click on “Confirm the two green lights are on”
and then press “Next”
4
1Connect the power supply and LAN cable into
the device and WIFI router
3Go to “Hafele Devices”and then select
“Gateway”
02
The application will search for the devices, please wait until the device appeares and then press on “+” sign5
When the display screen shows “Added” that means the device pairing was successful
6
03
Add Wireless Gateway (Zigbee)
Go to “Hafele Smart Living” and then select “+”
on the right side or press on “Add”
2
Select WIFI menu, enter WIFI password and
then press “Next”
4
1Connect the power supply cable to the device
3Go to “Hafele Devices” and select
“Wireless Gateway (Zigbee)”
04
Click on “Confirm the indicator is blinking rapidly” and then press “Next”5
When the display screen shown “Added” that means the device pairing was successful6
Network Socket
(Zigbee Module)
Zigbee Module
Network Socket
(Zigbee Module)
Zigbee Module
05
Pairing lock with Application
Connect the Zigbee module and
re-insert the battery
21 Open battery cover and then remove
one piece of battery
3Go to “Hafele Smart Living APP”, select “+” and then click on “Lock (Zigbee)”
06
6Enter the Locks settings menu, then
select“Network”
Unlock the lock and hold on the door open5
Select “Pairing with APP” on the digital door lock7
4Select the Gateway to add the lock
and click on “Confirm”
Menu
Dismantle Alert
System Querry
Network
Network
Paring with App
Delete Paring
8Click on “Confirm the indicator is blinking rapidly” and then press “Next”
07
9When the device has been paired successfully, the application will show an icon to change the device
name and then press “done”
08
Basic function
Battery status
Notifications
Private mode
Allowed users History logs
Random PIN Code and
remote door opening
settings
Remote door
opening
Create temporary
PIN Code
Door status
Edit lock
name
09
Remote door opening with mobile APP
Touch and long press to the sign on centre2
Please wait until display screen shows
opening successful
4
1Open the application and select
lock management
3When the display screen appears,
then click “Confirm”
10
Create temporary PIN Code
Touch the sign on centre and then slide left2
Touch the screen and please wait until
the digits stop
4
1Open the application and select
lock management
3“Remote dynamic password” will show as
the picture below
11
Add users
Select “+” on the right side2
Family Members; enter user data e.g. Name, Region,
Account (email of their mobile APP account)
4
1Select “Users” on the bottom
3Select the member type and then click
“Immediately add”
**Note: Users will then see this lock in their APP
and have access to all functions.
12
Enter non-family user data. These members are only added to display their name in the unlock “Records”.
This is very useful, but needs some setup.
5
5.1 Add user PIN Code, fingerprint
or card using the locks own menu
(not in the app)
5.2 Test your PIN Code, fingerprint
or card to open the lock
5.3 Open the App and check
the unlock “Records”
5.4 You can see the Number
assigned to your PIN Code,
fingerprint or card in the logfile
5.5 Go back to “Users”, select
the user and click “Edit”
5.6 Now you can assign the
correct PIN Code, fingerprint
or card “number” to the
correct user name
Unlock records
13
1Select “Records” on the bottom
2The application will show the usage history e.g. name, time and unlock activity
Temporary PIN Code function
Select “Dynamic Password Management”2
1Select “Setting” on the right
14
15
5Select “Verify door lock administrator password is available” in case of need to enter Master’s PIN Code
before using the random security coding function
Select “All users are available” to activate the
random security coding function for all users
43 Select “Available to administrators only” to
activate the random security coding function
for admin only
16
Remote door function settings
Select “Remote Door Opening Management”2
1Select “Setting” on the right
17
5Select “Disable remote doors” to deactivate the remote doors function
Select “No password is required” to activate the
function for all users
43 Select “Administrators password only” to activate
the function for admin only
/
