Datalogic STAR-Modem Operating instructions

1

RF DEVICE SETUP FOR STARModem™

SETUP FOR STAND ALONE MODE

The following procedure allows configuring an RF Device to communicate with

STARModem™ in Stand Alone Mode:

Restore RF Device Default

1. iPk

iPk

Enter Configuration

2. ik

ik

ONLY FOR DRAGON™ M

Set Date

3.

i*"k

+

six digits for Day, Month and Year (DDMMYY).

Set Time

4.

i*#k

+

four digits for Hours and Minutes (HHMM).

SETUP FOR STAND ALONE MODE

2

Set RF Device Address

5. i3"3')k

i3"3')k

+

four digits from the Numeric Table in the range 0000-1999.

All RF Devices must have different addresses.

STARModem™ Address

6. i343k

i343k

read the code above and the four-digit address of the

STARModem™.

Exit and Save Configuration

7. i k

i k

SETUP FOR STAR-System™ MODE

3

SETUP FOR STAR-SYSTEM™ MODE

The following procedure allows configuring an RF Device to communicate with

STARModem™ in STAR-System™ Mode:

Restore RF Device Default

1. iPk

iPk

Enter Configuration

2. ik

ik

ONLY FOR DRAGON™ M

Set Date

3.

i*"k

+

six digits for Day, Month and Year (DDMMYY).

Set Time

4.

i*#k

+

four digits for Hours and Minutes (HHMM).

Set RF Device Address

5. i3"3',k

i3"3',k

+

four digits from the Numeric Table in the range 0000-1999.

All RF Devices must have different addresses.

STAR-Modem™ Address

SETUP FOR STAR-System™ MODE

4

i343k

read the code above and the four-digit address of the STAR-Modem™

Exit and Save Configuration

7. i k

i k

5

NUMERIC TABLE

ik

0

ik

1

ik

2

ik

3

ik

4

ik

5

ik

6

ik

7

ik

8

ik

9

Datalogic STAR-Modem Operating instructions

Related papers

Other documents