2. Riverside Furniture
  3. 60257

Riverside Furniture 60257 Assembly Instructions

  • Hello, I'm your assistant. I've reviewed the assembly instructions for the Chair X-Back Side. This document includes a parts list, as well as a step-by-step guide on how to assemble your chair. I am ready to answer your questions about the assembly process for this chair.
  • What tools do I need for assembly?
    Where was this product made ?
    What is the model name of a product?
#60257
X-Back Side Chair
Made in Viet Nam
Page 1 of 2
Harper
Dining Room
Assembly Instructions
Components and Hardware List
Warning
- Be sure to check all packing material carefully for small parts, which may have come
loose inside the carton during shipment.
- To prevent possible scratches and damage, this furniture must be assembled
on a soft surface such as a blanket or carpet.
5/16" x 19mm x 2mm
Flat Washer
5/16" x 18 x 1 1/2"
Allen Head Bolt
Step 1: Do not fully tighten the bolts
5mmAllen key #8 x1 1/2" Wood Screw
5/16" x 18 x 2 1/2"
Allen Head Bolt
5/16" x 18 x 3 1/2"
Allen Head Bolt
Right Stretcher
Left Stretcher
Chair Back Chair Seat Left Leg Right Leg
1PC1PC1PC1PC
1PC 1PC 4PCS 4PCS
5/16"x12mm x3mm
Spring Washer
2PCS 10PCS 10PCS 1PC 4PCS
Made in Viet Nam
Page 2 of 2
Harper
Dining Room
Assembly Instructions
Step 3: Do not fully tighten the screw
Step 4: Using the Allen Key to tighten all bolts
Step 5: Using a Phillips head screw driver to tighten all screw
COMPLETE
60257 X-Back Side Chair
/