Trinabess Trinahome T Series Installation guide

Brand: Trinabess

Model: Trinahome T Series

Type: Installation guide

This manual is also suitable for

Trinahome TB9800TH

Installation Manual

Solar Battery Hybrid System

T series

Trina Energy Storage Solutions (Jiangsu) Co., Ltd.

Tel: +86 519 8517 6686

Add: No. 2 Tianhe Road, Trina PV Park, New District,

Changzhou, Jiangsu, 213031

E-Mail: [email protected]

China

〒105-6133東京都港区浜松町二丁目４番１号

Tel: +81 (0) 3 6432 0581

トリナ·エナジー·ストレジー·ジャパン株式会社

世界貿易センタービル２１階

E-Mail: [email protected]

Japan

Trina Energie Storage Vertrieb und Service GmbH

Add: Otto-Schott-Str.4, 60438, Frankfurt am Main, Germany

E-Mail: [email protected]

Europe

Tel: +49 (0) 69 75844 361

Tel: +61 2 8034 6313

E-Mail: [email protected]

Oceania

Add: Unit 60, 20 - 28 Maddox Street, Alexandria,

NSW 2015, Australia

Trina Energy Storage Solutions (Australia) Pty. Ltd.

Tel: +86 519 8517 6686

E-Mail: [email protected]

Singapore

Add: 600 North Bridge Road, #12-01 Parkview Square,

Singapore 188778

Trina Energy Storage Solutions (Singapore) PTE. Ltd.

www.trinaenergystorage.com WI - IM - T Series - 0002 2018 V3.0_EN

Technical Service Provided by

Trina Energy Storage Solutions (Jiangsu) Co., Ltd. (Trinabess)

NO. 2 Tianhe Road, Trina PV Park, New District, Changzhou,

Jiangsu, P.R.China.

Tel: +86 519 8517 6686

[email protected]

The details of this documentation are the property of

Trinabess.

Using and publicizing this documentation, even if only in

parts require the written consent of Trinabess.

All information in this documentation has been compiled

and checked with most care. Despite of this, errors or

deviations cannot be completely excluded. We assume

no liability therefore.

User is encouraged to check updated version at

http://www.trinaenergystorage.com/

Published by

Legal Disclaimer

Preface

Please read the safety instructions in this manual first.

Throughout the manual it is assumed that the reader is familiar with AC and DC

installations and knows the rules and regulations for electrical equipment, as well as for

connecting it to the utility grid. It is especially important to be familiar with the general

safety rules for working with electrical equipment.

Read this installation manual before you start

How to use this manual?

This installation manual is intended for qualified electricians only.

Thank you for purchasing our highly reliable and efficient hybrid solution. This N6052T

hybrid system is rated IP65 inverter and IP20 battery packs, which is rated for dusty or

humid environments and is only suitable for indoor installation.

If you are reading the electronic version of the manual, please note that you can click the

content to find information you want quickly. All underlined characters are clickable. A

phrase named ‘Back to Top’ at the bottom of each chapter can help you go back to the

first page quickly.

Before using this device, please ensure that you have read this manual including

installation and safety operation carefully.

If you have any difficulty during installation or operation, please refer to this manual or

send email to [email protected], or contact your local Trinabess office.

Content

1. Safety

2. Product Description

3. Product Specification & Packaging

4. Installation

5. Electrical Connection

3.1.1 Hybrid Inverter Specification

3.1.2 Battery Bank Specification

3.3.1 Before Unpacking the Device

3.3.2 Packing

3.4.1 TB5200TH / TB5200TD Hybrid Inverter Packing List

3.4.2 TB9800TH Hybrid Inverter Packing List

3.4.3 Battery Module Packing List

3.4.4 Battery Control Box Packing List

3.4.5 Energy Meter Packing List

4.2.1 Mounting Inverter

4.2.2 Mounting Battery Bank

5.1.1 Connecting Battery Module Power Cable

5.1.2 Connecting Battery Module Communication Cable

5.1.3 Connecting Grounding Wire

5.1.4 Covering Boards

1.1 Important Safety Information

1.2 Safety Rules

1.3 Exclusion of Liability

2.1 General System Description

2.2 System Connection

3.1 Technical Specification

3.2 Component Dimension

3.3 Unpacking the Device

3.4 Packing List

4.1 Selecting Installation Location

4.2 Mounting

5.1 Battery Module Connection

5.2 Inverter Cable Connection

5.3 Meter Cable Connection

6. Commissioning

7. System Settings

8. Add Device on Cloud Platform

9. System Maintenance

Commissioning Survey

6.1 System Commissioning Checklist

6.2 System Commissioning

7.1 LCD

7.2 Wi-Fi

8.1 Dealer/Installer User Account Registration

8.2 Add New Device

7.1.1 LCD Interface and Indication Lights

7.1.2 LCD Display Definition

7.1.3 LCD Display Menu Definition

7.1.4 LCD Setting Menu

7.2.1 Wi-Fi Function

7.2.2 Wi-Fi Connecting

The following operating and maintenance instructions must be read before performing

system installation, operation and maintenance acitivities.

Check for damage on the device and package. If you are in doubt, please contact us

or the distributor before installing the device. Do not install damaged batteries.

Before connecting the solar modules or battery packs with the product, please check

the voltages and make sure they are within the limits of the Trina inverter

specifications. Failure to observe these specifications could void your warranty.

Only personnel trained and qualified with local electrical codes may work with the

electrical installations. For safety, please follow the steps described in this manual.

Please refer to “Disconnecting for maintenance”. Note that, after disconnecting the

hybrid inverter from power grid, PV panels and battery packs, wait at least 15 minutes

before the next proceeding.

Do not commission the device until the whole system complies with the

application-specific national rules and safety regulations.

The ambient conditions given in the product documentation (data sheet) must be

observed.

The device manufacturer or installer is responsible for compliance with the limit

values as prescribed in the national regulations.

Only persons who are trained and qualified for the use and operation of this device

are authorized to work on the device.

Only authorised personnel are allowed to repair or modify the inverter. To ensure

safety for user and environment, only the original spare parts available from your

supplier should be used.

Unauthorised changes of functional safety parameters may cause injury or accidents

to people or inverter. Additionally it will lead to the cancellation of all inverter operating

approval certificates.

1. Safety

1.1 Important Safety Information

1.1.1 Before Installation

1.1.2 Installation

1.1.3 Disconnecting the Product

1.1.4 Operating the Product

1.1.5 Maintenance and Modification

1.1.6 Functional Safety Parameters

Installation Manual

Solar Battery Hybrid System (T Series)

The following warning notices are adopted in safety related guidelines to describe the

various risk grade:

Death or severe personal injury will occur.

Death or severe personal injury may occur.

Personal injury or material damage may occur.

Do not open the device! Dangerous voltage may still be applied

inside the device even after it has been switched off.

Make absolutely sure you have established earthing system before

connecting the device to the supply circuit!

Health risk for persons with cardiac pacemakers, metallic implants

and hearing aids in the immediate vicinity of electrical equipment!

Personal injury mechanically by crushing, shearing, cutting or

striking.

If the inverter is operated with the wrong country code, the power

supply company may cancel the operating license.

Surfaces of the housing can be hot! Risk of injury! Risk of burns.

The housing top and the heat sinks may have a surface temperature

up to 70°C.

Do not place nor install near flammable or explosive materials.

Install the product out of reach of children.

Read the instruction manual before starting installation and

operation.

1.2 Safety Rules

DANGER

WARNING

CAUTION

HOT SURFACE

Electric shock!

High leakeage current!

Health risk!

Risk of improper handling!

Cancellation of the operating license!

Installation Manual

Solar Battery Hybrid System (T Series)

Heavy weight may cause serious injury to the back.

Observe a waiting time of 15 minutes.

Do not dispose of the product with household wastes.

Recyclable.

Disconnect the equipment before carrying out maintenance or repair.

Observe precautions for handling electrostatic discharge sensitive

devices.

15min

1.3 Exclusion of Liability

Trinabess will not be liable for any direct, indirect or consequential damages, losses or

costs including without restriction any economic losses of any kind, any loss or damage to

property, any personal injury, any damage or injury arising from or as a result of misuse or

abuse, or the incorrect installation, integration or operation of the product. We disclaim

any liability for direct or indirect damages due to:

1. Improper installation or commissioning,

2. Unauthorized modifications, alterations or repair attempts,

3. Inappropriate use or operation,

4. Insufficient ventilation of the device,

5. Non-compliance with relevant safety standards or regulations,

6. Flood, lightning, overvoltage, storm and fire (acts of nature).

We do not assume any liability for an incorrect country code setting.

We reserve the right to make alterations that will improve device function.

Installation Manual

Solar Battery Hybrid System (T Series)

2. Description

2.1 General System Description

Figure 2.1 Solar battery hybrid system

Figure 2.2 System main parts

The solar battery hybrid system is designed for a new PV installation as shown in Figure

2.1.

The system includes three main parts: hybrid inverter (with integrated EMS), battery

packs and energy meter as shown in Figure 2.2.

A B C

Installation Manual

Solar Battery Hybrid System (T Series)

PV PV

Grid

Energy Meter 1

Energy Meter 2

Grid

Meter

Load

Hybrid Inverter

Battery Bank

Inverter

2.2 System Connection

A) Hybrid inverter

The hybrid inverter converts the DC power generated by PV modules to AC power. During

the daytime, the PV power will be first used by the household load, then the surplus be

charged into battery packs for later use. Any further surplus PV power will be fed into

public grid.

During the nighttime, the hybrid inverter will discharge the battery to supply the load.

B) Battery packs

Battery packs store the energy generated from the hybrid inverter. Each battery module

capacity is 3 kWh, the system capacity is extendable by adding more battery modules.

The capacity can be expanded to 18kWh.

C) Trina energy meter

The bi-directional energy meter is used for data collection and communication. With the

meter data, the hybrid inverter decides when to charge/discharge the battery packs.

The three main parts (DC coupling system/AC coupling system/DC & AC coupling

system) are connected as shown in Figure 2.3~2.5, which can optimise solar energy

self-use and realise peak shaving. The user can select the connection modes based on

the actual PV system.

Installation Manual

Solar Battery Hybrid System (T Series)

Figure 2.3 DC coupling system

Battery bank

Communication

RS485

BAT+

PV+

PV-

BAT-

CAN

Grid

Meter

ME1

7 8

N’

L3’

L2’

L1’

Load

Inverter

06 Installation Manual

Solar Battery Hybrid System (T Series)

Figure 2.5 DC & AC coupling system

Figure 2.4 AC coupling system

Communication

RS485

BAT+

PV+

PV-

BAT-

CAN

Grid

Meter

ME1

7 8

Inverter

N’

L3’

L2’

L1’

Load

ME2

N L3 L2 L1

N’ L3’ L2’ L1’

Communication

RS485

BAT+

BAT-

CAN

Grid

Meter

ME1

7 8

Inverter

N’

L3’

L2’

L1’

Load

ME2

N L3 L2 L1

N’ L3’ L2’ L1’

Inverter

Battery bank

Inverter

Battery bank

3. Product Specification & Packaging

3.1 Technical Specification

3.1.1 Hybrid Inverter Specification

Max. PV input power/Max. PV array size

Max. input voltage

MPPT voltage range

MPPT tracker

Max. input current

Max. short-circuit current, module array

Start pv voltage

5200W / 6800W

800V

150 ~ 700V

200V

11A / 11A

13.8A / 13.8A

15A

18.8A

4000W / 4000W

18A / 18A

120~500V

222~500V

410x540x230

< 35kg

470x600x230

< 40kg

540x670x270

< 55kg

5000W

7.2A

2.5kVA

9600W

13.9A

4.8kVA

3Ph+N/400Vac

50Hz

< 5 seconds

324V ~ 436V

50Hz

91%

95%

IP65

55dB

Forced air cooling

VDE4105, IEC62109, IEC62477

8000W / 8000W

20A / 20A

200 ~ 800V

400 ~ 800V

9800W / 12800W

900V

200 ~ 800V

14A / 14A

17.5A / 17.5A

300V

Max. charging/Discharging power

Max. charging/Discharging current

Operation voltage range

Battery full power voltage range

Max. output power

Rated output power

Rated output frequency

AC nominal current

Max. auto-switching time

AC voltage (L-L)

AC rated frequency

Max. backup supply power

Max. efficiency (PV-battery-grid)

Europ. efficiency (PV-grid)

IP protection class

Noise

Dimension (WxHxD) (mm)

Weight

Cooling

Certificate

Item

PV input

TB5200TH TB5200TD TB9800TH

Battery input (DC)

AC output

Backup function (optional, need an additional external backup box）

Other parameters

Description

Table 3.1 Hybrid inverter specification

07 Installation Manual

Solar Battery Hybrid System (T Series)

3.1.2 Battery Bank Specification

Item Description

Dimension (WxHxD) (mm)

Weight

Numbers of battery module

Usable battery power

Continuous battery power

Cell technology

Installation type

Communication

DOD

Cycle life

Certificate

IP protection class

Operating temperature

<1 month 0~55⁰C;

<3 months 0~45⁰C;

<12 months 0~25⁰C

(before storage the SOC will be higher than 50%）

720x600

x190

<70kg

2x3kWh

-3kW

<100kg

3x3kWh

-4.5kW

<130kg

4x3kWh

-6kW

<160kg

5x3kWh

-7.5kW

<190kg

6x3kWh

-9kW

720x820

x190 720x1040

x190 720x1260

x190 720x1480

x190

NCA

Stand mounted or wall mounted

CAN 2.0

100%

>8000

IEC 62619, UN38.3

IP21

-10~45⁰C (-10~0⁰C discharging only) *

Storage conditions

Table 3.2 Battery bank specification

08 Installation Manual

Solar Battery Hybrid System (T Series)

NOTE * Battery bank is not permitted to be installed below 0⁰C. The suggested

environment temperature for battery installation is +5 ~ +35⁰C.

3.2 Component Dimension

Figure 3.1 Hybrid inverter dimension (TB5200TH)

Figure 3.2 Hybrid inverter dimension (TB5200TD)

Figure 3.3 Hybrid inverter dimension (TB9800TH)

410mm

540mm

230mm

470mm

600mm

230mm

670mm

540mm 270mm

09 Installation Manual

Solar Battery Hybrid System (T Series)

Figure 3.4 Battery bank dimension

Item Description

Dimension (WxHxD) (mm) 720x600

x190 720x820

x190 720x1040

x190 720x1260

x190 720x1480

x190

10 Installation Manual

Solar Battery Hybrid System (T Series)

Table 3.3 Battery bank dimension

11 Installation Manual

Solar Battery Hybrid System (T Series)

3.3 Unpacking the Device

3.3.1 Before Unpacking the Device

3.3.2 Packing

All products are thoroughly tested and inspected before they’re packed for transportation.

Although they’re shipped in reliable package, damage during transportation could still

occur.

It is important to inspect the shipping package prior to the installation carefully. If any

external damage on the package makes you suspect the device could be damaged or if

you find that the device is damaged after unpacking it, please report the damage

immediately to your distributor or the goods forwarder.

If it becomes necessary to return the device, please use the original packages in which

they were delivered.

To avoid injury, lift the device by the two holding grips that are accessible on the side and

take the device out of the package. Ensure a second person present to assist in the

unpacking and installation of the devices.

The solar battery hybrid system consists of inverter, battery modules and battery control

box, for different system capacities the scope of supply is different, as shown below:

Inverter

Battery

module

Battery

control box

Energy

Meter

Table 3.4 Packing

Quantity

2x3kWh

3x3kWh

4x3kWh

5x3kWh

6x3kWh

3.4 Packing List

3.4.1 TB5200TH / TB5200TD Hybrid Inverter Packing List

3.4.2 TB9800TH Hybrid Inverter Packing List

Hybrid inverter

Hybrid inverter mounting bracket

Aviation plug female (for AC grid connection)

Expansion tube and screw

Installation manual

User manual

Warranty

Item Quantity Description

Hybrid inverter

Hybrid inverter mounting bracket

Aviation plug female (for AC grid connection)

Expansion tube and screw

Installation manual

User manual

Warranty

Item Quantity Description

A1 A2

12 Installation Manual

Solar Battery Hybrid System (T Series)

Table 3.5 TB5200TH / TB5200TD hybrid inverter packing list

Table 3.6 TB9800TH hybrid inverter packing list

A1 A2

A3 A4

A5 A6 A7

Warranty

A3 A4

A5 A6 A7

Warranty

3.4.3 Battery Module Packing List

Battery pack

Battery pack communication cable

Grounding wire

Expansion tube and screw

Item Quantity Description

B2 B3 B4

13 Installation Manual

Solar Battery Hybrid System (T Series)

Table 3.7 Battery module packing list

3.4.4 Battery Control Box Packing List

Control box

PCS communication cable

Meter communication cable

Resistor

Expansion tube and screw

Item Quantity Description

C1 C2

C3 C5

Table 3.8 Battery control box packing list

3.4.5 Energy Meter Packing List

D1 1 Energy meter

Item Quantity Description

14 Installation Manual

Solar Battery Hybrid System (T Series)

Table 3.9 Energy meter packing list

Do not install inverter and battery modules in direct sunlight or direct rain fall. The

shaded side of the building would be better.

Do not install the system on flammable construction materials, or in areas close to

flammable or explosive materials.

15 Installation Manual

Solar Battery Hybrid System (T Series)

Figure 4.2 Selecting installation location

4.1 Selecting Installation Location

Observe the minimum clearance distance between inverter and nearby object to

ensure proper heat dissipation.

4. Installation

1000mm Max.

300mm Min.

300mm Min. 300mm Min.

500mm

Min.

Figure 4.1 System clearance refernce

Page is loading ...

Trinabess Trinahome T Series Installation guide

Brand: Trinabess

Model: Trinahome T Series

Type: Installation guide

This manual is also suitable for

Trinahome TB9800TH

Download PDF

report

Trinabess Trinahome T Series Installation guide

This manual is also suitable for

Trinabess Trinahome T Series Installation guide

Other documents