2. SMART Technologies
  3. Board 7000 and 7000 Pro
Board 7000 and 7000 Pro

SMART Technologies Board 7000 and 7000 Pro Reference guide

  • Hello! I am an AI chatbot trained to assist you with the SMART Technologies Board 7000 and 7000 Pro Reference guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
The SMARTBoard® 7000 Pro series interactive display is the hub
of your meeting room. PC-free embedded computing provides
one-touch access to collaborative tools, including a whiteboard,
wireless screen sharing, and a web browser. There’s no need for
wires, cables, or manual software and firmware updates.
Waking up the display
The display’s occupancy sensor can detect people up to 16' (5 m)
away when the display is sleeping. When the sensor detects
people, the display is ready to turn on. To turn on the display,
press the Power button on the convenience panel, or pick up a
pen or the eraser.
Using the Home screen
The Home screen shows recent files and favorite apps and files.
Open the Apps Library from the Home screen to access the
Whiteboard and Browser apps.
You can also open Screen Share, the Files Library and settings
from the Home screen.
To show the Home screen
Tap the Home button at the bottom of the screen.
kapp Whiteboard
Using kapp Whiteboard, you can write and erase notes on the
display just as you do on a traditional dry erase board. You can
also save your notes for later and share them using the
SMARTkapp® app.
To start a whiteboard
Open the Apps Library and tap kapp Whiteboard .
To write in digital ink
1. Pick up a pen.
2. Use the pen to write in digital ink.
3. Return the pen to its holder to recharge it.
To erase digital ink
Move a pen’s eraser over the digital ink.
OR
Move the eraser over the digital ink.
OR
Move your fist or palm over the digital ink.
To pan
Press the screen and move your finger in
any direction.
TIP
You can use the following tools during your Whiteboard
session:
Return to the previous screen.
Change the pen type, ink width, and ink color
Connect your smart phone or other mobile device to
the display using the SMARTkapp app.
Disconnect your smart phone or other mobile device.
Save snapshots of the whiteboard to your smart phone
or other mobile device.
Save all notes in the Files Library and clear the
Whiteboard.
SMARTBoard® 7000 Pro series
smarttech.com/kb/171401
SMARTBoard 7000 Pro series
Convenience panel
The convenience panel contains buttons for turning the
display on and off, controlling the volume, freezing and
unfreezing the screen, and showing and hiding a screen
shade. It also includes connectors for USBdevices and drives
and a computer or other input source.
Browser
You can use Browser to view web content on the display.
To use Browser
1. Open the Apps Library and tap Browser .
2. Use Browser as you would use a web browser on your
computer or mobile device.
Annotation layers
When using the Browser app or Screen Share app, you can write
or draw on an annotation layer and save the screenshot to the
Files Library.
To write or draw on an annotation layer
1. Pick up one of the display’s pens.
2. Use the pen to write or draw in digital ink.
3.
Tap Close or Back in the command bar.
4. Tap Save to save the screenshot in the Files Library.
OR
Tap Discard to discard the screenshot and return to the app.
To open a saved screenshot
1. Open the Files Library.
2. Select a screenshot by tapping the screenshot’s tile.
Input
You can use the connector panel on the side of the display or the
convenience panel to connect a room computer, guest laptops
and other input sources.
Connector panels
Convenience panel
After you’ve connected computers and other input sources to the
display, switch between these input sources by showing the
Home screen, tapping Input , and then selecting an input
source.
Embedded Windows® 10 experience
If an AM50 appliance with an Intel® Compute Card is installed in
the display’s accessory slot, you can use an embedded Windows
10 experience on the display.
To use the embedded Windows 10 experience
1. From the Home screen, tap Input .
2. Tap the embedded Windows 10 experience’s thumbnail.
smarttech.com/kb/171401
Was this document helpful?
smarttech.com/docfeedback/171401
SMARTBoard 7000 Pro series
Screen Share
You can share content from computers and mobile devices on
the display wirelessly using Screen Share.
Screen Share supports the following devices:
Chromebook™ laptops, using Google™ Cast
Chrome™browser extension
Windows computers, using Miracast
*
, Google Cast
Chromebrowser extension or AirParrot
Mac computers and iOS devices, using AirPlay
Android™ devices, using Cast Screen
*
Windows 10 and Windows 8.1 operating systems only
To use Screen Share
1. Show the Home screen and tap Screen Share .
2. Share the computer or mobile device’s screen following the
instructions in Using Screen Share.
Cleaning up the display
After you’ve finished using the display, show the Home screen
and tap Clean Up to clean up the display for the next user.
More information
For more information about the SMARTBoard
7000 Pro series interactive displays, browse to
the following page or scan the QR code.
support.smarttech.com/docs/redirect/
?product=smartboard7000
For more information, visit smarttech.com
For more training, visit smarttech.com/training
© 2018–2019SMARTTechnologiesULC. All rights reserved. SMARTBoard, SMARTkapp,
smarttech, the SMART logo and all SMART taglines are trademarks or registered trademarks of
SMARTTechnologiesULC in the U.S. and/or other countries. Intel is a trademark of Intel
Corporation in the U.S. and/or other countries. Google, Android, Chrome and Chromebook are
trademarks of Google Inc. All other third-party product and company names may be trademarks of
their respective owners. Contents are subject to change without notice. 06/2019.
Was this document helpful?
smarttech.com/docfeedback/171401
smarttech.com/kb/171401
/