Danfoss VLT 2800 (Legacy Product) Installation guide

Type
Installation guide

This manual is also suitable for

MI.28.E2.51 - VLT is a registered Danfoss trademark
195R0039
*MI28E251*
VLT
®
2800
NEMA 1 klemmeafdækning
NEMA 1 terminal covering
NEMA 1 Klemmenabdeckung
1. Monter afdækning til kabelgennem-
føringen først.
Se tegning A.
Mount covering for cable lead-in first.
See figure A.
Erst die Abdeckung für den Kabel-
eingang montieren.
Siehe Zeichnung A.
2. Monter kabler til netforsyning, motor,
bremsemodstand, loadsharing samt til
relæ via conduits.
Mount cables to mains supply, motor
brake resistor, loadsharing, relay via
conduits.
Die Kabel für Netzversorgung, Motor
und ggf. Bremswiderstand, Load-
sharing und zu Relais mit PG
Verschraubungen montieren.
(Conduits).
4. Når alle kabler er monteret kan
klemmeafdækning samles.
Se tegning B.
When all cables are mounted, the
terminal covering can be collected.
See figure B.
Wenn alle Kabel montiert sind, kann die
Klemmenabdeckung aufgesetzt
werden.
Siehe Zeichnung B.
Varenumre: VLT type
Code numbers: VLT type
Bestellnummern: VLT typ
195N1900 VLT 2803-2815 200-240 V
VLT 2805-2815 380-480 V
195N1901 VLT 2822 200-240 V
VLT 2822-2840 380-480 V
195N1902 VLT 2840 200-240 V
VLT 2855-2875 380-480 V
A
B
  • Page 1 1

Danfoss VLT 2800 (Legacy Product) Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI