Anets 14GS Datasheet

Anets
Brand
Anets
Model
14GS
Category
Deep fryers
Type
Datasheet

Anets 14GS is an All Purpose Fryer that is a real work horse. It is made of top quality stainless steel making it durable and easy to clean and maintain. The unique cross-fire burners provide a 4 sided heating system for highly efficient and consistent frying results. The easy to clean open frypot has sloped sides to prevent crumb accumulation and prolong shortening life and reduce carbon build-up. The frypot also has an easily accessible cold zone allowing you to easily reach in and wipe out the hardest to reach corners.

Anets 14GS is an All Purpose Fryer that is a real work horse. It is made of top quality stainless steel making it durable and easy to clean and maintain. The unique cross-fire burners provide a 4 sided heating system for highly efficient and consistent frying results. The easy to clean open frypot has sloped sides to prevent crumb accumulation and prolong shortening life and reduce carbon build-up. The frypot also has an easily accessible cold zone allowing you to easily reach in and wipe out the hardest to reach corners.

This All Purpose Anets
Fryer Has Special Features
That Make It A Real
Work Horse
The top quality stainless steel frypot
provides remarkable recovery and
years of service with a lifetime
warranty. Unique cross-fire burners
provide a 4 sided heating system for
highly efficient and consistent frying
results. The easy to clean open frypot
has sloped sides to prevent crumb
accumulation. Food particles drop
rapidly into the extra large cold zone
which prolongs shortening life and
reduces carbon build-up. Extra wide
access to this cold zone permits
reaching in and wiping out even the
hardest to reach corners.
STANDARD FEATURES
■ Stainless steel frypot has a lifetime
warranty
■ Open vat design with sloped sides
forces food particles to fall into the
easily accessible cold zone
■ Unique cross fire burners provide a
4 sided heating system
■ Fully insulated cabinet keeps the
kitchen cool
■ Dual (35 to 50lb.) shortening levels
for varying cooking capacities
■ Thermostat is located behind the
door to protect from damage
■ 1 1/4! Full port ball valve prevents
clogging
■ Stainless steel basket hanger lifts off
for easy cleaning and access to the
backsplash
Item No.
Anets GoldenFry
™
14” Standard Gas Fryer
Model 14GS
Anetsberger Brothers, Inc.
■
Dependable Foodservice Equipment
180 North Anets Drive
■
Northbrook, Illinois 60062
1-800-837-2638
■
Fax 847-272-1943
■
www.anets.us
86197_B_14GS 6/19/08 11:56 AM Page 1
SPECIFICATIONS
■ Model 14GS
■ Certification ETL, NSF, CE* (*14GSU Model)
■ BTUH 111,000
■ Gas Pressure NG 3.5! WC, LP 10! WC
■ Gas Connection 3/4! NPT
■ Electrical Requirements None
■ Thermostats Milli-Volt
■ Temperature Range 200° to 375°F, (93°-191°C)
■ Hi-limit Safety control turns off main gas
supply at 435° F (224°C)
■ Safety Pilots 100% gas shut off valve
■ Burners Atmospheric pre-mix
■ Frypot Stainless steel
■ Cabinet Door, stainless steel
Sides, painted
Backsplash, stainless steel
■ Shortening Capacity 35 lbs - 50 lbs
■ Cooking Capacity 70 lbs of fries per hour
■ Cooking Area 14! x 14.5! (35.3 cm x 37 cm)
STANDARD ACCESSORIES
■ 2 Twin nickel plated baskets
■ Rack type basket support
■ Clean out rod
■ 6! Adjustable chrome plated legs
■ Drain pipe extension
OPTIONS AND ACCESSORIES
■ Stainless steel sides
■ Filter systems, built-in Filtronic
or Filter Mate under fryer filter
■ Can bank units at no additional
charge
■ Front drain tray
■ Casters
Specifications subject to change without notice.
SS# 102 Revised 2/07
Printed in the U.S.A.
Model 14GS
Anets GoldenFry
™
14” Standard Gas Fryer
■ Sediment tray
■ Single or triple baskets
■ Fryer cover
■ Drain table
14"
(
36 cm
)
31"
(
79 cm
)
1.5"
(
4 cm
)
Top View
Front View
Side View
14.5"
(
37 cm
)
8
.2
5"
(
21 cm
)
4
5
.
5"
(
116 cm
)
(
90 cm
)
3/4" NPT INLET PIPE REQ'D
D
6"
(
15 cm
)
15.63"
(
40 cm
)
1
5
.2
5"
(
39 cm
)
7.
8
1"
(20 cm)
(
Anetsberger Brothers, Inc.
■
Dependable Foodservice Equipment
180 North Anets Drive
■
Northbrook, Illinois 60062
1-800-837-2638
■
Fax 847-272-1943
■
www.anets.us
86197_B_14GS 6/19/08 11:56 AM Page 2
  • Page 1 1
  • Page 2 2

Anets 14GS Datasheet

Anets
Brand
Anets
Model
14GS
Category
Deep fryers
Type
Datasheet

Anets 14GS is an All Purpose Fryer that is a real work horse. It is made of top quality stainless steel making it durable and easy to clean and maintain. The unique cross-fire burners provide a 4 sided heating system for highly efficient and consistent frying results. The easy to clean open frypot has sloped sides to prevent crumb accumulation and prolong shortening life and reduce carbon build-up. The frypot also has an easily accessible cold zone allowing you to easily reach in and wipe out the hardest to reach corners.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents