Anets 18AA Datasheet

Category
Deep fryers
Type
Datasheet

Anetsberger Brothers, Inc. 18AA is a top-of-the-line gas fryer equipped with heavy-duty automatic basket lifts to ensure product consistency. Its exclusive tube design provides fast recovery, minimizes cleanup time, and maximizes heat transfer. The unique elliptical shape of the tubes eliminates sedimentation, improves shortening life, and minimizes the number of times you have to drain the fryer. With a cooking capacity of 920 orders of shoestring french fries per hour, this fryer is perfect for high-volume operations. The 18AA also features a recessed Lexan-faced control panel to protect controls from damage and a stainless steel frypot with a lifetime warranty.

Anetsberger Brothers, Inc. 18AA is a top-of-the-line gas fryer equipped with heavy-duty automatic basket lifts to ensure product consistency. Its exclusive tube design provides fast recovery, minimizes cleanup time, and maximizes heat transfer. The unique elliptical shape of the tubes eliminates sedimentation, improves shortening life, and minimizes the number of times you have to drain the fryer. With a cooking capacity of 920 orders of shoestring french fries per hour, this fryer is perfect for high-volume operations. The 18AA also features a recessed Lexan-faced control panel to protect controls from damage and a stainless steel frypot with a lifetime warranty.

Item No.
Increase Output And
Maintain Product
Consistency With The
Anets 18! GoldenFry
Fryer With Automatic
Basket Lifts
This 18! gas fryer is equipped with
heavy duty lifts to remove the product
at precisely the right cooking time. The
exclusive tube design provides fast
recovery, minimizes clean-up time and
maximizes heat transfer. The elliptical
shape of the tubes eliminates sedimen-
tation on tubes, improves shortening
life and minimizes the number of
times you have to drain fryer. The
stainless steel tubes accommodate
150,000 BTUH burners and feature
computer designed radiants for the best
performance and recovery.
STANDARD FEATURES
Stainless steel frypot has a lifetime
warranty
Two heavy duty automatic basket
lifts assure product consistency
Chrome plated basket lifts simply lift
off for easy cleaning
Tube type design assures maximum
heat transfer in the 18! wide frying
area
Unique shape of tubes allows access
to cold zone for easy cleaning
Burner tubes are equipped with spe-
cial heat baffles for fast recovery and
energy efficiency
Dual shortening levels (70 - 100 lbs)
for varying cooking capacities
Recessed Lexan faced control panel
protects controls from damage
Anetsberger Brothers, Inc.
Quality is just the beginning
180 North Anets Drive
Northbrook, Illinois 60062
1-800-837-2638
Fax 847-272-1943
www.anets.us
Anets GoldenFry
18” Fryer
Model 18AA
Model 18AA shown with optional casters
Model 18AA 1/26/09 11:50 AM Page 1
Anetsberger Brothers, Inc.
Quality is just the beginning
180 North Anets Drive
Northbrook, Illinois 60062
1-800-837-2638
Fax 847-272-1943
www.anets.us
SPECIFICATIONS
Model 18AA, Fully automatic twin basket
lifts with 15 minute timers
Certification NSF, ETL
BTUH 150,000
Gas Pressure NG 3.5! WC, LP 10! WC
Gas Connection 3/4! NPT
Electrical Requirements 120 Volts, 5 Amps, Single Phase
Thermostat Electric snap action type
Temperature Range 200° to 375°F, (9-191°C)
Burners Atmospheric pre-mix
Hi-limit Safety control turns off main gas
supply at 435°F (224°C)
Safety Pilot 100% gas shut off valve
Spark Ignitor Piezo electric
Frypot Stainless steel
Tubes Stainless steel
Cabinet Door, stainless steel
Sides, painted
Backsplash, stainless steel
Shortening Capacity 70 lbs - 100 lbs
Cooking Capacity 920 orders of shoestring french fries
per hour
STANDARD ACCESSORIES
15 minute timer
2 Nickel plated twin baskets
Rack type basket support
Clean out rod
6! Adjustable chrome plated legs
Drain pipe extension
Top View
Specifications subject to change without notice.
SS#122 Revised 1/09
Printed in the U.S.A.
Model 18AA
Anets GoldenFry
18” Fryer
Height with lifts raised
(133 CM)
(116 CM)
(90 CM)
(15 CM)
(46 CM)
(21 CM)
(50 CM)
(39 CM)
(24 CM)
OPTIONS AND ACCESSORIES
Stainless steel sides
Filter systems, built-in Filtronic or
Filter Mate under fryer filter
Fri-Tronic 2,8,or 16 product computers
Solid state thermostat with
shortening melter, boil out mode,
and digital timers (Fri-Tronic)
TM
Can bank units at no additional
charge
Drain table
Fryer cover
Front drain tray
Casters
Side View
Front View
1.5"(4cm)
38" (97cm)
18" (46cm)
Model 18AA 1/26/09 11:51 AM Page 2
  • Page 1 1
  • Page 2 2

Anets 18AA Datasheet

Category
Deep fryers
Type
Datasheet

Anetsberger Brothers, Inc. 18AA is a top-of-the-line gas fryer equipped with heavy-duty automatic basket lifts to ensure product consistency. Its exclusive tube design provides fast recovery, minimizes cleanup time, and maximizes heat transfer. The unique elliptical shape of the tubes eliminates sedimentation, improves shortening life, and minimizes the number of times you have to drain the fryer. With a cooking capacity of 920 orders of shoestring french fries per hour, this fryer is perfect for high-volume operations. The 18AA also features a recessed Lexan-faced control panel to protect controls from damage and a stainless steel frypot with a lifetime warranty.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI