Anets MX-14E Datasheet

Category
Deep fryers
Type
Datasheet

Anets MX-14E is a high-efficiency gas fryer designed for commercial use, offering rapid cooking and consistent results with its 111,000 BTUH cross-fire burners and 4-sided heating system. The stainless steel frypot equipped with copper-flashed heat exchangers enables efficient heat transfer and quick temperature recovery. The fryer ensures precise temperature control ranging from 200°F to 375°F, accommodating various frying requirements. The stainless steel construction provides durability and easy cleaning, while the recessed Lexan-faced control panel protects against damage.

Anets MX-14E is a high-efficiency gas fryer designed for commercial use, offering rapid cooking and consistent results with its 111,000 BTUH cross-fire burners and 4-sided heating system. The stainless steel frypot equipped with copper-flashed heat exchangers enables efficient heat transfer and quick temperature recovery. The fryer ensures precise temperature control ranging from 200°F to 375°F, accommodating various frying requirements. The stainless steel construction provides durability and easy cleaning, while the recessed Lexan-faced control panel protects against damage.

Anetsberger Brothers, Inc.
Quality is just the beginning
180 North Anets Drive
Northbrook, Illinois 60062-5452
1-800-837-2638
Fax 847-272-1943
www.anets.us
Anets GoldenFry 14” High Efficiency Gas Fryer
Model MX-14E
Item No.
This Premier Model In
The Anets GoldenFry
Series Of Fryers Features
High Performance And
Superior Recovery To
Meet Any Frying
Requirement
Easy cleaning features, energy
efficiency, and superior construction
make this 14 fryer the choice for
outstanding performance and design.
Energy saving 111,000 BTUH cross-fire
burners cook like 145,000 BTUH fryer
due to a 4 sided heating system. To
maintain direct heat transfer, the
frypot is equipped with copper flashed
heat exchangers. The stainless steel
frypotequipped with these heat
exchangers provides remarkable
temperature recovery
STANDARD FEATURES
Stainless steel frypot has a lifetime
warranty
Stainless steel front panel, trim and
door
Top quality stainless steel frypot
provides efficient uniform heat
transfer
Copper-flashed heat exchangers
transfer heat directly into frypot for
maximum efficiency
Open vat design with sloped sides
forces food particles to rapidily fall
into the easily accessible cold zone
Unique crossfire burners provide a
4 sided heating system
Fully insulated cabinet keeps the
kitchen cool
Dual (35 to 50 lb.) shortening levels
for varying cooking capacities
Recessed Lexan faced control panel
protects controls from damage
Stainless steel basket hanger lifts off
for easy cleaning and access to the
backsplash
MX-14E shown on
optional casters
100331_MX 14E 10/8/08 1:26 AM Page 1
Anets GoldenFry 14” High Efficiency Gas Fryer
Model MX-14E
Anetsberger Brothers, Inc.
Quality is just the beginning
180 North Anets Drive
Northbrook, Illinois 60062-5452
1-800-837-2638
Fax 847-272-1943
www.anets.us
SPECIFICATIONS
Model MX-14E, Basic
MX-14D, 15 minute
timers with buzzers
Certification ETL, NSF, CETL
BTUH 111,000
Gas Pressure NG 3.5 WC, LP 10 WC
Gas Connection 3/4 NPT
Electrical Requirements MX-14E, 2 Amps
MX-14D, 2 Amps
Thermostat Electric snap action type
Temperature Range 200° to 375°F, (93-191C)
Burners Atmospheric pre-mix
Hi-limit Safety control turns off main gas
supply at 45F (23C)
Safety Pilot 100% gas shut off valve
Spark Ignitor Piezo electric
Frypot Stainless steel
Cabinet Front panel, door, trim and
backsplash are Stainless Steel.
Sides are painted
Shortening Capacity 35 lbs - 50 lbs
Cooking Capacity 80 lbs of fries per hour
STANDARD ACCESSORIES
2 Twin nickel plated baskets
Rack type basket support
Clean out rod
OPTIONS AND ACCESSORIES
Two 15 minutes timers
with buzzers (MX-14D)
Stainless steel sides
Filter systems, built-in Filtronic
or Filter Mate under fryer filter
Fri-Tronic computer
Shortening melter
Can bank units at no additional
charge
Specifications subject to change without notice.
SS# 105 9/08
Printed in the U.S.A.
6Adjustable chrome plated legs
Drain pipe extension
Sediment tray
Single or triple baskets
Drain table
Front drain tray
Fryer cover
Casters
(35.56 CM)
(78.74 CM)
2.5"
(6.35 CM)
31"
14"
Top View
(39.37 CM)
(38.74 CM)
(19.67 CM)
7.75
15.5"
Side View
Front View
(36.83 CM)
(115.57 CM)
(90.17 CM)
(15.24 CM)
(20.96 CM)
14.5"
100331_MX 14E 10/8/08 1:26 AM Page 2
  • Page 1 1
  • Page 2 2

Anets MX-14E Datasheet

Category
Deep fryers
Type
Datasheet

Anets MX-14E is a high-efficiency gas fryer designed for commercial use, offering rapid cooking and consistent results with its 111,000 BTUH cross-fire burners and 4-sided heating system. The stainless steel frypot equipped with copper-flashed heat exchangers enables efficient heat transfer and quick temperature recovery. The fryer ensures precise temperature control ranging from 200°F to 375°F, accommodating various frying requirements. The stainless steel construction provides durability and easy cleaning, while the recessed Lexan-faced control panel protects against damage.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI