Symmons H423-V Installation guide

Category
Wall & ceiling mounts accessories
Type
Installation guide

This manual is also suitable for

Symmons H423-V-STN is a 3-mode hand shower unit designed for easy installation and comfortable use. It comes with a 30-inch slide bar with a cradle for hand shower mounting, a 60-inch flexible metal hose, and an in-line vacuum breaker for backflow protection. The hand shower head has a diameter of 3-3/4 inches and offers three spray modes to choose from. The unit has a standard flow rate of 2.5 gallons per minute (9.5 liters per minute) and is made of metal and non-metallic construction, plated in a standard polished chrome finish.

Symmons H423-V-STN is a 3-mode hand shower unit designed for easy installation and comfortable use. It comes with a 30-inch slide bar with a cradle for hand shower mounting, a 60-inch flexible metal hose, and an in-line vacuum breaker for backflow protection. The hand shower head has a diameter of 3-3/4 inches and offers three spray modes to choose from. The unit has a standard flow rate of 2.5 gallons per minute (9.5 liters per minute) and is made of metal and non-metallic construction, plated in a standard polished chrome finish.

Model Numbers Feature Highlights
Warranty
Limited Lifetime - to the original end purchaser in
consumer installations.
5 Years - for commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
3 Mode Hand Shower Unit
Installation Guide
H423-V
Options/Modifications
Compliance
H423-V 3 Mode Hand Shower Unit 3 mode hand shower
3-3/4" diameter hand shower head
In-line vacuum breaker for backow protection
30" slide bar with cradle for hand shower mounting
60" exible metal hose
Standard 2.5 gpm (9.5 L/min) ow restrictor
Shall be metal and nonmetallic construction, plated in
standard polished chrome nish
Note: Append appropriate -sufx to model number.
-1.5 1.5 gpm (5.7 L/min) flow restrictor
-2.0 2.0 gpm (7.6 L/min) flow restrictor
-STN Satin Nickel finish
- ASME A112.18.1/CSA B125.1
CG
Dimensions
Measurements
A Ø 1-1/2", 38 mm
B 2-1/8", 54 mm
C 28-9/16", 725 mm
D(2x) Hole Size:
Ø 1/4", 6 mm
E 3", 76 mm
F
Male 1/2-14 NPT tting must
be recessed 1/4" (6 mm)
from nished wall
Note: Dimensions subject to change without notice.
FLOORFLOOR
EE
B
C
A
FF
D
Symmons Industries, Inc. 31 Brooks Drive Braintree, MA 02184 Phone: (800) 796-6667 Fax: (800) 961-9621
Copyright © 2018 Symmons Industries, Inc. symmons.com [email protected] ZV-3268 REV 0 102618
H
G
AB
C
D
E
A
B
C
D
I
F
J
Notes:
1) Apply a bead of silicone around the perimeter of all shower trim
installed ush to the nished wall.
2) Apply plumber tape to all threaded connections.
Parts Breakdown
WARNING: This product can expose you to chemicals including lead, which is known to the state of California to
cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Replacement Parts
Item Description Part Number
A
B
C
D
(2x) Cap
(2x) Screw
(2x) Bar End
(2x) Tile Anchor
RA-003
E30" Bar
48" Bar
RA-005
RA-006
F Hand Shower EF-119
G Wall Elbow EF-105
H 60" Hose EF-02976
I Slide Assembly RA-004
J Vacuum Breaker EF-109
Tools Required for Installation
Adjustable Wrench
Drill
Phillips Head
Screwdriver
Plumber Tape
Silicone
  • Page 1 1
  • Page 2 2

Symmons H423-V Installation guide

Category
Wall & ceiling mounts accessories
Type
Installation guide
This manual is also suitable for

Symmons H423-V-STN is a 3-mode hand shower unit designed for easy installation and comfortable use. It comes with a 30-inch slide bar with a cradle for hand shower mounting, a 60-inch flexible metal hose, and an in-line vacuum breaker for backflow protection. The hand shower head has a diameter of 3-3/4 inches and offers three spray modes to choose from. The unit has a standard flow rate of 2.5 gallons per minute (9.5 liters per minute) and is made of metal and non-metallic construction, plated in a standard polished chrome finish.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI