CipherLab 8500 SERIES Reference guide

8500 Series Mobile Compute

r

8500/8570/8580/8590

Version 2.11

The software contains proprietary information of CIPHERLAB CO., LTD.; it is provided

under a license agreement containing restrictions on use and disclosure and is also

protected by copyright law. Reverse engineering of the software is prohibited.

Due to continued product development this information may change without notice. The

information and intellectual property contained herein is confidential between CIPHERLAB

and the client and remains the exclusive property of CIPHERLAB CO., LTD. If you find

any problems in the documentation, please report them to us in writing. CIPHERLAB

does not warrant that this document is error-free.

No part of this publication may be reproduced, stored in a retrieval system, or

transmitted in any form or by any means, electronic, mechanical, photocopying,

recording or otherwise without the prior written permission of CIPHERLAB CO., LTD.

For product consultancy and technical support, please contact your local sales

representative. Also, you may visit our web site for more information.

The CipherLab logo is a registered trademark of CIPHERLAB CO., LTD.

Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft

Corporation in the United States and/or other countries.

Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A.

Other product names mentioned in this manual may be trademarks or registered

trademarks of their respective companies and are hereby acknowledged.

The editorial use of these names is for identification as well as to the benefit of the

owners, with no intention of infringement.

CIPHERLAB CO., LTD.

Website:

http://www.cipherlab.com

FOR USA

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

 Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

FOR CANADA

This digital apparatus does not exceed the Class B limits for radio noise emissions from

digital apparatus as set out in the interference-causing equipment standard entitled

"Digital Apparatus," ICES-003 of Industry Canada.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

Cet appareil numerique respecte les limites de bruits radioelectriques applicables aux

appareils numeriques de Classe B prescrites dans la norme sur le material brouilleur:

"Appareils Numeriques," NMB-003 edictee par l'Industrie.

FOR HAND-HELD PRODUCT WITH RF FUNCTIONS

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance 20

cm between the radiator & your body. It only operated in hand-held used.

IMPORTANT NOTICES

If you only transfer data to Host by WLAN/Bluetooth, please keep the minimum distance

20 cm between machine & your body.

FOR PRODUCT WITH LASER

Per FDA and IEC standards, the scan engines described in this manual are not given a

laser classification. However, the following precautions should be observed:

CAUTION

This laser component emits FDA / IEC Class 2 laser light at the exit port. Do not

stare into beam.

SAFETY PRECAUTIONS

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

 The use of any batteries or charging devices, which are not originally sold or

manufactured by CipherLab, will void your warranty and may cause damage to

human body or the product itself.

 DO NOT disassemble, incinerate or short circuit the battery.

 DO NOT expose the scanner or the battery to any flammable sources.

 For green-environment issue, it's important that batteries should be recycled in a

proper way.

 Under no circumstances, internal components are self-serviceable.

 The charging and communication cradle uses an AC power adaptor. A socket outlet

shall be installed near the equipment and shall be easily accessible. Make sure there

is stable power supply for the mobile computer or its peripherals to operate properly.

CARE & MAINTENANCE

 This mobile computer is intended for industrial logistics use. The mobile computer is

rated IP 64, however, it may do damage to the mobile computer when being exposed

to extreme temperatures or soaked wet.

 When the body of the mobile computer gets dirty, use a clean and wet cloth to wipe

off the dust. DO NOT use/mix any bleach or cleaner. Always keep the LCD dry.

 For a liquid crystal display (LCD) or touch screen, use a clean, non-abrasive, lint-free

cloth to wipe dust off the screen. DO NOT use any pointed or sharp object to move

against the surface.

 If you want to put away the mobile computer for a period of time, download the

collected data to a host computer, and then take out the battery pack. Store the

mobile computer and battery pack separately.

 When the mobile computer resumes its work, the main and backup batteries will take

a certain time to become fully charged.

 If you shall find the mobile computer malfunctioning, write down the specific scenario

and consult your local sales representative.

Version Date Notes

2.11 July 21, 2008

 Modified: section 1.3.3 44-key Keypad – “59-key” corrected to

“44-key”

2.10 Apr. 24, 2008 New Word template applied

2.01 Aug. 10, 2007

 Modified: section 1.5.9 Reader – Defaults updated

 Modified: section 4.1.8.(4) GSM/GPRS Menu> Security

 Modified: section 4.1.8.(4) GSM/GPRS Menu> GPRS Settings

2.00 May 19, 2007

 New release

1.07 Oct. 31, 2006

 Modified: section 1.5.9 List by standards for RFID tags

 Modified: section 1.5.10 Bluetooth specification

 Modified: section 4.1.7 Bluetooth Menu > Security – max. 16

characters for PIN

1.06 July 27, 2006

 Modified: section 1.3.9 Reader – RFID (add ICODE)

 Modified: section 2.5.2 Front Panel (LEDs of cradle)

 New: section 4.1.8(2) System Menu > IR Network Menu

1.05 June 22, 2006

 Modified: section 1.3.9 Reader – RFID

 Modified: section 4.1.1 Information – add RFID version

1.04 June 16, 2006

 FCC Regulations – Class B statement

 Modified: section 1.3.9 Reader –

Symbologies Supported &

Enabled

1.03 May 23, 2006 Company name changed to CIPHERLAB CO., LTD. since April 2006

 New: Safety Precaution

 Modified: Care & Maintenance

 Modified: section 1.2.3 Dimensions & Specifications

 Modified: section 1.3.4 Keypad – Screen Icons

 Modified: section 1.3.5 LCD – Screen & Backlight Settings

 Modified: section 1.3.12 Application Software to include AG and

CipherNet

 Modified: sections 2, 2.5 ~ 2.7

 Modified: sections 3.1 & 3.3

 Modified: section 4.1.2 Screen Calibration

 Modified: section 4.1.6 Load Program via Bluetooth

1.02 Apr. 4, 2006

 Update drawings

 Load Program via Bluetooth

1.00 Mar. 1, 2006 Initial release

RELEASE NOTES

CONTENTS

IMPORTANT NOTICES ...................................................................................................................... - 3 -

For USA .......................................................................................................................................... - 3 -

For Canada .................................................................................................................................... - 3 -

For Hand-held Product with RF Functions ................................................................................... - 3 -

For Product with Laser .................................................................................................................. - 4 -

Safety Precautions ........................................................................................................................ - 4 -

Care & Maintenance ..................................................................................................................... - 4 -

RELEASE NOTES.............................................................................................................................. - 5 -

INTRODUCTION.................................................................................................................................... 1

Getting Familiarized with 8500........................................................................................................ 2

Installing the Hand Strap............................................................................................................. 3

Installing the Pistol Grip............................................................................................................... 4

Charging the Battery .................................................................................................................... 5

Dimensions........................................................................................................................................ 6

Features............................................................................................................................................. 7

Inside the Package............................................................................................................................ 7

Accessories........................................................................................................................................ 8

USING 8500 MOBILE COMPUTER....................................................................................................... 9

1.1 Battery ......................................................................................................................................... 9

1.1.1 Inserting the Battery ........................................................................................................10

1.1.2 Charging the Battery ........................................................................................................11

1.1.3 Caution of Low Battery Charge........................................................................................11

1.1.4 Power Management.........................................................................................................11

1.2 Memory .....................................................................................................................................12

1.2.1 Caution of Data Loss........................................................................................................12

1.2.2 Upgradeable Memory.......................................................................................................12

1.3 Keypad ......................................................................................................................................13

1.3.1 Screen Icons.....................................................................................................................14

1.3.2 24-key Layout...................................................................................................................15

1.3.3 44-key Keypad..................................................................................................................17

1.4 LCD ............................................................................................................................................19

1.4.1 Adjusting the Backlight ....................................................................................................19

1.4.2 calibrating the Screen......................................................................................................20

1.5 Notifications..............................................................................................................................21

1.5.1 Status LED ........................................................................................................................21

1.5.2 Audio ................................................................................................................................. 21

1.5.3 Vibrator .............................................................................................................................21

1.6 Data Capture.............................................................................................................................22

1.6.1 Dual-mode Support ..........................................................................................................22

1.6.2 Symbologies Supported...................................................................................................22

1.6.3 RFID Tags Supported .......................................................................................................24

8500 Series Mobile Computer Reference Manual

1.7 Communications via the Cradle...............................................................................................

25

1.7.1 Setting up the Cradle .......................................................................................................25

1.7.2 Cradle Options..................................................................................................................26

1.7.3 Understanding the Status Indicators ..............................................................................28

1.8 Communications Over Wireless Networks ..............................................................................29

1.8.1 IR/IrDA ..............................................................................................................................30

1.8.2 Bluetooth (Class 2)...........................................................................................................31

1.8.3 IEEE 802.11b/g ...............................................................................................................32

1.8.4 GSM/GPRS ....................................................................................................................... 33

LEARNING SOFTWARE ARCHITECTURE.............................................................................................35

2.1 Application Module...................................................................................................................37

2.1.1 Application Generator (AG) ..............................................................................................37

2.1.2 CipherNet..........................................................................................................................37

2.1.3 User Program....................................................................................................................38

2.2 System Configuration ...............................................................................................................38

2.2.1 System Menu....................................................................................................................38

2.2.2 Kernel ...............................................................................................................................38

2.2.3 Program Manager ............................................................................................................38

SYSTEM MENU...................................................................................................................................39

3.1 Information................................................................................................................................40

3.1.1 Understanding Device Code ............................................................................................41

3.2 Settings .....................................................................................................................................42

3.2.1 Clock .................................................................................................................................42

3.2.2 Backlight Period ...............................................................................................................42

3.2.3 Auto Off .............................................................................................................................42

3.2.4 Power On Options.............................................................................................................43

3.2.5 Key Click ........................................................................................................................... 43

3.2.6 System Password .............................................................................................................43

3.2.7 Font ...................................................................................................................................43

3.2.8 Screen Calibration............................................................................................................43

3.2.9 Reset to Default ...............................................................................................................43

3.2.10 Reset Reader .................................................................................................................44

3.2.11 LCD Heater .....................................................................................................................44

3.3 Tests ..........................................................................................................................................45

3.3.1 Reader ..............................................................................................................................45

3.3.2 Buzzer ............................................................................................................................... 45

3.3.3 LCD & LED ........................................................................................................................45

3.3.4 Keyboard...........................................................................................................................45

3.3.5 Memory.............................................................................................................................45

3.3.6 Touch Screen....................................................................................................................46

3.3.7 Vibrator .............................................................................................................................46

3.3.8 Echo Test ..........................................................................................................................46

3.3.9 RFID ..................................................................................................................................46

3.4 Memory .....................................................................................................................................47

3.4.1 Size information ...............................................................................................................47

3.4.2 Initialize.............................................................................................................................47

3.5 Power.........................................................................................................................................48

3.6 Load Program ...........................................................................................................................49

3.7 Bluetooth Menu ........................................................................................................................50

8500 Series Mobile Computer Reference Manual

3.7.1 Information .......................................................................................................................

51

3.7.2 Connect Setting................................................................................................................52

3.7.3 Security .............................................................................................................................53

3.7.4 Echo Tests ........................................................................................................................54

3.7.5 Pairing Test.......................................................................................................................57

3.7.6 Freq. Dev. List...................................................................................................................58

3.7.7 Network Setting................................................................................................................59

3.8 Serial PPP Menu .......................................................................................................................60

3.8.1 Information .......................................................................................................................60

3.8.2 Connection Set.................................................................................................................61

3.8.3 Echo Test ..........................................................................................................................62

3.9 IR Network Menu (Ethernet via IR) .......................................................................................... 63

3.9.1 Information .......................................................................................................................63

3.9.2 Network Setting................................................................................................................64

3.9.3 Echo Tests ........................................................................................................................65

3.10 Wi-Fi Menu..............................................................................................................................66

3.10.1 Information.....................................................................................................................67

3.10.2 Network Setting .............................................................................................................68

3.10.3 WLAN Setting .................................................................................................................69

3.10.4 Security...........................................................................................................................70

3.10.5 Echo Tests ......................................................................................................................71

3.11 GSM/GPRS Menu...................................................................................................................74

3.11.1 Information.....................................................................................................................74

3.11.2 Security...........................................................................................................................75

3.11.3 GPRS Setting..................................................................................................................76

3.11.4 GSM/GPRS Tests...........................................................................................................77

PROGRAM MANAGER & KERNEL ...................................................................................................... 79

4.1 Program Manager.....................................................................................................................79

4.1.1 Download..........................................................................................................................80

4.1.2 Activate .............................................................................................................................82

4.1.3 Upload...............................................................................................................................83

4.2 Kernel........................................................................................................................................84

4.2.1 Kernel Information ...........................................................................................................84

4.2.2 Load Program ...................................................................................................................85

4.2.3 Kernel Update .................................................................................................................. 87

4.2.4 Test & Calibrate................................................................................................................87

4.2.5 Bluetooth Menu................................................................................................................88

SPECIFICATIONS ................................................................................................................................ 89

DOWNLOAD UTILITIES ....................................................................................................................... 91

ProgLoad.exe ...................................................................................................................................92

IRLoad.exe .......................................................................................................................................93

Command Line ...........................................................................................................................93

Download.exe ..................................................................................................................................94

Command Line ...........................................................................................................................94

TROUBLESHOOTING ..........................................................................................................................95

1

Answering heavy industrial demands for robust, versatile and high performance

computers, the 8500 Series Mobile Computer is specifically designed for all-day,

everyday use as well as for data-intensive applications in harsh environments.

This line of product comes with built-in Bluetooth wireless technology and allows for

optional modules for 802.11b/g as well as GSM/GPRS, enabling all the time, anywhere

applications and seamless real time sharing of performance. The 8500 Series Mobile

Computer is bundled with powerful and rich features to ensure success in timely

processing of information, even in rigorous industrial environments, and thus, makes an

ideal choice for a wireless solution in either increasing business flexibility or answering

the demanding needs of heavy-duty mobile computers. Being programmable, this handy

device can run custom applications or terminal emulation applications.

This manual serves to guide you through how to install, configure, and operate the

mobile computer. We recommend you to keep one copy of the manual at hand for quick

reference or maintenance purposes. To avoid any improper disposal or operation, please

read the manual thoroughly before use.

Thank you for choosing CipherLab products!

INTRODUCTION

2

8500 Series Mobile Computer Reference Manual

GETTING FAMILIARIZED WITH 8500

Figure 1: Overview

3

Introduction

INSTALLING THE HAND STRAP

The hand strap is ideal for one-handed operation, which requires safe and convenient

hold of the mobile computer.

Warning: Always make sure the hand strap is well hooked and screwed to the back

of the mobile computer before use.

When the hand strap is desired, install it to the mobile computer by following these

steps:

1) Place the mobile computer face down on a flat and clean surface.

2) Screw one end of the hand strap to the back of the mobile computer.

3) Insert and hook the other end of the hand strap to the bottom of the mobile

computer.

4) Make sure the hand strap is securely attached to the mobile computer.

5) Adjust the length of the hand strap to suit your handbreadth.

Figure 2: Installing the Hand Strap

4

8500 Series Mobile Computer Reference Manual

INSTALLING THE PISTOL GRIP

This contoured pistol grip enables intuitive trigger-and-scan operation, which is very

helpful in scan intensive applications. When the pistol grip is desired, install it to the

mobile computer by following these steps:

1) Place the mobile computer face down on a flat and clean surface.

2) Remove the shield-like cover on the back of the mobile computer by unscrewing.

If the hand strap is installed, remove it first. Keep the cover and screws for future use

when the pistol grip is not desired.

3) Connect the power connector from the pistol grip to the receptacle on the mobile

computer.

4) Screw the pistol grip to the shield-like cover.

5) Make sure all screws are tightened up.

6) Turn on the mobile computer and test the trigger.

Figure 3: Installing the Pistol Grip

5

Introduction

CHARGING THE BATTERY

You can use a cradle or charger to charge the Mobile Computer and/or its battery. Below

is the 4-Slot Battery Charger. For the Charging & Communication Cradle, refer to section

1.7

Communications via the Cradle.

Warning: It is recommended that the charging devices be operated at room

temperature (18°C to 25°C) for optimal performance. The charging devices

will not charge the battery when the temperature exceeds 40°C.

1) The Battery Charger can be mounted on table or wall. Drill two holes (centers spaced

160 millimeters apart), secure the two supplied screws, and mount the Battery

Charger by sliding over screws.

2) Slide the battery into the battery compartment at a proper angle, with contacts facing

to back.

3) Connect the power supply cord to the power receptacle on the charger.

4) Connect the other end of the power supply cord to a suitable power outlet.

5) Press the power switch on, and the Battery Charger’s LED will be red.

6) While charging, the LED of the battery compartment will be red. When fully charged,

the LED will be green.

LED Status Meaning

Power Solid red

Off

Power ON

Power OFF

Battery Charging Solid red

Solid green

Flashing red and green

Off

Charging battery

Charging done

Error occurs

Battery not ready

Figure 4: 4-Slot Battery Charger

6

8500 Series Mobile Computer Reference Manual

DIMENSIONS

Figure 5: Dimensions

7

Introduction

FEATURES

 Ergonomic design — ruggedized yet streamlined, with hand strap for secure hold.

 Built tough to survive drop test and sealed against moisture/dust to IP 64.

 Upgradeable memory — optional memory card adds up to 10 MB (2 MB onboard + 8

MB) for data storage.

 Dual mode support — One barcode scan engine plus the RFID reader

 Total wireless solution — IR/IrDA and Bluetooth integrated, with connectivity options

for 802.11b/g and/or GSM/GPRS.

 Large graphic monochrome LCD touch screen supports double-byte characters and

bitmap graphics. The touch screen featuring signature capture can be activated with

its stylus or a finger, software programmable.

 Programmable feedback includes buzzer, LED indicator, and vibrator.

 Quick link to any backend database through Windows-based CipherNet programs for

VT100/220 and IBM 5250 emulation.

 Easy customization of AG applications through Windows-based Application Generator

(AG) programs for preloaded AG Runtime.

 Programming support includes BASIC & C compilers.

 Accessories and peripherals include pistol grip, international AC charging cradle, etc.

INSIDE THE PACKAGE

The following items are included in the package. Save the box and packaging material for

future use in case you need to store or ship the mobile computer.

 8500 Series Mobile Computer

 Rechargeable Li-ion battery pack

 Stylus

 Hand Strap

 Software & Manual CD

Note: For battery charging, you need to purchase a charging cradle separately.

8

8500 Series Mobile Computer Reference Manual

ACCESSORIES

Rich choices of optional accessories are available for you to enhance the total

performance of the mobile computer.

 Pistol Grip (detachable)

 Belt Holster

 Protective Cover

 Memory Card, 4 or 8 MB

 Spare rechargeable Li-ion battery

 4-slot Battery Charger

 Charging & Communication Cradle

 Modem Cradle

 Ethernet Cradle

 Vehicle Cradle

 Travel Charger

 Bluetooth Access Point

 802.11b/g Access Point

9

This chapter explains the features and usage of the 8500 Series Mobile Computer. The

8500 family includes:

 8500 Bluetooth Class 2

 8570 Bluetooth Class 2 + 802.11b/g

 8580 Bluetooth Class 2 + GSM/GPRS

 8590 Bluetooth Class 2 + 802.11b/g + GSM/GPRS

IN THIS CHAPTER

1.1 Battery....................................................................... 9

1.2 Memory.................................................................... 12

1.3 Keypad..................................................................... 13

1.4 Touch Screen ............................................................ 19

1.5 Notifications.............................................................. 21

1.6 Data Capture ............................................................ 22

1.7 Communications via the Cradle.................................... 25

1.8 Communications over Wireless Networks....................... 29

1.1 BATTERY

 Main Battery

The mobile computer is powered by a rechargeable 3.7 V/4000 mAh Li-ion battery

pack, and it takes approximately four hours to fully charge it.

For power-saving purpose, always turn off the backlight while working in a well-lit

area. When the backlight is on for extended periods of time, the main battery will

become low sooner than expected.

The smart battery icon on the LCD screen shows the status of power consumption.

There are two ways to monitor a low battery charge or discharged battery from the

screen.

 Examine the level of the 4-bar battery icon

 Monitor voltage level (see section 3.5 Power)

 Backup Battery

The backup battery on the main board takes charge when the main battery is

removed or drained out. When fully charged, the 3.0 V/7 mAh rechargeable Lithium

button cell helps retain data in SRAM and maintain the running of the real-time clock

and calendar for at least one week without the main battery. In the meantime, you

have to replace the main battery as soon as possible.

It takes at least twenty-four hours to fully charge the backup battery. However, it is

not necessary to fully charge the backup battery for the mobile computer to work.

Chapter 1

USING 8500 MOBILE COMPUTER

10

8500 Series Mobile Computer Reference Manual

 Monitor voltage level (see section 3.5 Power)

1.1.1 INSERTING THE BATTERY

For shipping and storage purposes, save the mobile computer and the main battery in

separate packages. This will keep both batteries in good condition for future use.

Note: Any improper handling may reduce the battery life.

1) Hold the mobile computer still as shown below.

2) Slide the battery pack into the battery compartment at a proper angle (30°~45°) so

that the tabs on the bottom of the battery are hooked in the grooves of the

compartment. Make sure that the battery is snugly fit into the compartment.

3) Slide the battery latch to lock the battery in the compartment.

Note: For a new battery, make sure it is fully charged before use. Always prepare a

spare battery pack, especially when you are on the road.

Figure 6: Installing the Main Battery

Page is loading ...

CipherLab 8500 SERIES Reference guide

This manual is also suitable for

CipherLab 8500 SERIES Reference guide

Related papers

Other documents