2. SunPower
  3. InvisiMount
InvisiMount

SunPower InvisiMount User guide

  • Hello! I've reviewed the provided job aid for InvisiMount components by SunPower. This document details the correct tool and torque values for components like L-feet, end and mid clamps, ground lug assemblies and other parts. I can help you with any specific questions you have about these components or their installation.
  • What tool is required for the L-foot nuts?
    What is the torque value for the end clamp?
    Which tool should be used for the cover screws on the rail-mounted J-box?
    What is the torque value for M6 bolt in Ground lug assembly?
© 2022 SunPower Corporation | InvisiMount® Components Torque Values | Aug 2022 v2.0
InvisiMount® Components
InvisiMount Components Tool and Torque Values Job Aid
Component
Picture
Tool and Torque
L-foot
For the nuts that fit onto the t-bolts
which slide into the side channel:
15 mm deep socket
266 +20/-0 in-lb
End clamp
(Classic + Universal)
10 mm deep socket
85 +5/-0 in-lb
Mid clamp
(Classic + Universal)
10 mm deep socket
85 +5/-0 in-lb
Splice screw
10 mm deep socket
40 +5/-0 in-lb
Ground lug assembly
For M6 bolt:
10 mm deep socket
85 +5/-0 in-lb
For lug screw:
1/2” socket
35 +5/-0 in-lb
Rail-mounted J-box
For cover screws:
#2 square-drive torque screwdriver
16 in-lb
Row-to-row (R2R)
grounding clip
10 mm deep socket
85 +5/-0 in-lb
Breakers/Lugs
As per manufacturer’s specifications
PVS6
CT Terminals
(Consumption &
Production)
Flathead torque screwdriver
4.4 – 5.3 in-lb
/