Keychron Q0 User manual

Brand: Keychron

Model: Q0

Type: User manual

Keychron Q0 is a customizable number pad that offers a variety of features to enhance your productivity. With its hot-swappable switches, you can easily change the switches to match your typing preference. The number pad also features RGB backlighting with multiple lighting effects, allowing you to personalize your workspace. Additionally, the Q0 has dedicated media keys and a rotary encoder, which can be programmed to perform various functions. Whether you're a gamer, programmer, or creative professional, the Keychron Q0 is a versatile tool that can help you work more efficiently.

Keychron Q0 Customizable Number Pad Keycaps Size

Q0 Number Pad Plate File

How to Factory Reset (Firmware)

How to Factory Reset or Flash Firmware for Your Keychron Q0 Number Pad?

Troubleshooting? Or don’t know what’s going on with the keyboard? You may try factory reset.

Note: If everything works fine with your keyboard. Please don’t flash the firmware. There is a chance it can

damage your keyboard.

1. Download the Q0 firmware (the file needs to be unzipped) and download the QMK Toolbox. (If the

download link below does not work, use this link: https://github.com/qmk/qmk_toolbox/releases)

Download Q0 Firmware

Download QMK Toolbox for Mac

Download QMK Toolbox for Windows

2. Unplug the power cable from the keyboard.

3. Open the QMK Toolbox.

4. Remove the zero (“0”) keycap and you will find the reset button.

5. Press down and hold the reset button.

6. Plug in the power cable. The keyboard will enter into DFU mode. Then, the QMK Toolbox will display in

yellow words “***DFU device connected”.

7. Click open and choose the Keychron Q0 firmware. Click the Flash button. It will start flashing. (Note: Do

NOT unplug the power cable while it’s flashing.)

8. Wait a few seconds and when you see the content below, it means the keyboard has flashed successfully

factory reset.

If VIA can’t pair with your Keychron Q0 after you tried flashing, you need to follow these steps:

1. Reconnect your keyboard power cable.

2. If VIA still doesn’t pair together after you reconnect the power cable, download the Keychron Q0 keymap

JSON file.

Download Q0 keymap JSON for VIA

3. Open VIA.

Step 1: Click the “DESIGN” section.

Step 2: Drag the JSON file to the tab and then click the “CONFIGURE” section to customize the keymap.

5. VIA should pair together with the Keychron Q0 now.

You may contact support@keychron.com if a defect covered by the warranty arises in your product

within the warranty period. Keychron will honor the warranty of our Q and V series keyboard (e.g.: Q0,

Q1, Q2, V1, V2, etc.) by one of the following methods at our discretion:

– Defects of Q and V series keyboards have been caused by manufacturing: We will only replace the defective parts of the keyboard,

not the whole keyboard, as its highly customizable and easy to be rebuilt.

– Defects of Q and V series keyboards have been caused by disassembling our product, improper installation,

non-factory repairs/modifications, improper adjustment of the product, or neglect, including but not limited to

“burn-in”, and similar wrongful use: We will NOT offer free service. We only offer paid service to replace the

defective parts at your own cost (including the cost of parts, shipping fee and tax if applicable).

Assembling Guide

How to Disassemble the Q Series Keyboard

How To Disassemble Keychron QMK/VIA Enabled Keychron Keyboard

Step 1: Unscrew the screws on the bottom of the case by the hex key.

Step 2: Take the top and bottom of the case apart.

Step 3: Unscrew the screws on the daughter PCB.

Step 4: Take the main PCB and the top of the case apart.

Step 5: Remove the daughter PCB from the main PCB.

Step 6: Unscrew the six golden screws on the PCB.

Step 7: Take the PCB, the foam, and the plate apart.

Please watch the video above to see how to disassemble a Q series keyboard.

You may contact support@keychron.com if a defect covered by the warranty arises in your product

within the warranty period. Keychron will honor the warranty of our Q and V series keyboard (e.g.: Q1,

Q2, V1, V2, etc.) by one of the following methods at our discretion:

– Defects of Q and V series keyboards have been caused by manufacturing: We will only replace the defective parts of the keyboard,

not the whole keyboard, as its highly customizable and easy to be rebuilt.

– Defects of Q and V series keyboards have been caused by disassembling our product, improper installation,

non-factory repairs/modifications, improper adjustment of the product, or neglect, including but not limited to

“burn-in”, and similar wrongful use: We will NOT offer free service. We only offer paid service to replace the

defective parts at your own cost (including the cost of parts, shipping fee and tax if applicable).

Software Guide

Learn More How to Use VIA

How to Program Backlight Keys on VIA

How to Do a Keyboard Test

How to Use VIA To Pair with Keychron Q0

Keychron Q0 User manual

Keychron Q0 User manual

Related papers

Other documents