Submitted Model No.: _______________________________________________
Specific Features: __________________________________________________
STANDARD SPECIFICATIONS:
• Slip-on tub spout, model B114915.
• Tub/Shower require 1 1/2" wall cavity.
• Valve has back-to-back installation capability.
• Forged brass body.
• Cartridge utilizes integral check valves to prevent the cross
flow of water within the valve. Valve reduces the flow of
water to 0.5 GPM within 5 seconds of the complete loss of
pressure in the hot or cold water supply line. Outlet water
temperature is maintained within ±3° F variation with
changes in either hot or cold supply of up to 50 percent of
the normal supply pressure. Temperature is controlled by
handle with cold water always coming on first.
• Field adjustable means to limit handle rotation into hot
water zone. Per ASSE 1016.
• Temperature control to rotate a maximum of 120 from
full cold to the maximum temperature
• Single Handle.
• Pressure Balance.
• For use with automatic compensating valves rated
at 7.28 L/min (1.92 gpm) or less.
B112915▲ B114915▲
7"
(178 mm)
2 1/2"
(63 mm)
2 3/4"
(70 mm)
Face of plasterguard
should be flush with
finish wall line
Supply
8" (203 mm)
min.
18" (457 mm)
max.
5 5/16"
(136 mm)
5 5/16"
(136 mm)
2 3/4"
(70 mm)
4 3/16"
(106 mm)
2 1/2"
(63 mm)
2 1/2"
(63 mm)
RP44121▲ RP70536▲ 2.0 GPM
RP71609▲
TUB AND SHOWER
FAUCET
■ Foundation
®
Collection
■ Shower Only (B112915 Series)
■ Tub/Shower (B114915 Series)
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue
models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or
www.deltafaucet.com for finish options and product availability.
DSP-B-B112915 Rev. A
55 E. 111th Street, Indianapolis, Indiana 46280
350 South Edgeware Road, St. Thomas, ON N5P 4L1
© 2016 Masco Corporation of Indiana
▲ Designate proper finish suffix
*1/2*-14 threaded tub spout with
slip-on adapter included
COMPLIES WITH:
•
ASME A112.18.1 / CSA B125.1
Indicates compliance to
ICC/ANSI A117.1
•
ASSE 1016
• EPA
WaterSense
®
WARRANTY
•
Lifetime limited warranty on parts (other than
electronic parts and batteries) and finishes: or, for
commercial users, for 5 years from date of purchase.
•
5 year limited warranty on electronic parts
(other than batteries); or, for commercial users, for
1 year from the date of purchase.
No warranty is provided on batteries.
0
1
2
3
4
5
0102030405060708090
( )
G
6
069 138 207 276 345 414 483 552 621
0
3.8
7.6
11.4
15.1
18.9
22.7
( )
7
26.5
Tub Filler
30.3
34.1
8
9
Showerhead
2.0 GPM
Full Spray