Peerless PTT188780-OB Dimensions Guide

Category
Sanitary ware
Type
Dimensions Guide

This manual is also suitable for

TUB AND SHOWER FAUCET TRIM
Full Body
Spray
2 1/2"
(64 mm)
Face of plasterguard
should be flush with
nish wall line
Supply
RP70537
1.75 GPMRP44121
RP71609
* 1/2-14 threaded tub spout with
slip-on adapter included
8" (203 mm)
min.
18"(457 mm)
max.
5 3/8"
(136 mm)
5 3/8"
(136 mm)
Indicates compliance to
ICC/ANSI A117.1 - Valve control only
PSP-B-PTT188780 Rev. E
Designate proper nish sufx
STANDARD SPECIFICATIONS:
• Maintains a balanced pressure of hot and cold water even
when a valve is turned on or off elsewhere in the system.
• For use with MultiChoice
®
Universal rough valve body
(R10000 Series); not included.
• Back-to-back installation capability.
• Temperature only controlled with handle rotating a maximum
of 120° from full cold to the full hot.
• Cartridge utilize integral check valve to prevent the cross flow
of water within the valve.
• Shower head maximum flow rate 1.75 gpm @ 80 psi,
6.6 L/min @ 550 kPa.
• Slip-on tub spout.
WARRANTY:
• Lifetime limited warranty on parts (other than electronic
parts and batteries) and inishes; or, for commercial
users, for 5 years from the date of purchase.
• 5 year limited warranty on electronic parts (other than
batteries); or for commercial users, for 1 year from the
date of purchase. No warranty is provided on batteries.
PTT188780
p
PTT188790
p
Shower Only (PTT188780)
Tub/Shower (PTT188790)
COMPLIES WITH
• ASME A112.18.1 / CSA B125.1
• EPA WaterSense
®
PTT188780
PTT188790
4 3/8"
(111 mm)
7"
(178 mm)
2 3/4"
(70 mm)
2 7/16"
(62 mm)
2 7/16"
(62 mm)
3 3/4"
(95 mm)
6 1/16"
(155 mm)
  • Page 1 1

Peerless PTT188780-OB Dimensions Guide

Category
Sanitary ware
Type
Dimensions Guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI