Extron electronics 60-545-01 User manual

Brand
Extron electronics
Model
60-545-01
Category
Routers
Type
User manual

This manual is also suitable for

Extron Electronics 60-545-01 is an In-Circuit Power Adapter (IPA) that provides Power over Ethernet (PoE) to network devices. It is IEEE 802.3af compliant and can supply up to 12.5 watts of power. The IPA can detect whether a device is PoE-capable before supplying power, preventing damage to non-compliant devices.

The IPA has two RJ-45 female connectors: one for LAN input and one for powered LAN output. The LAN input connector links the IPA to the Ethernet LAN or a network switcher, hub, or router. The powered LAN output connector links to the network device.

The IPA has several LEDs that indicate power status. The power indicator LED lights green when power is input to the IPA. The Power over Ethernet indicator LED lights green if the connected network device is IEEE 802.3af compliant.

Extron Electronics 60-545-01 is an In-Circuit Power Adapter (IPA) that provides Power over Ethernet (PoE) to network devices. It is IEEE 802.3af compliant and can supply up to 12.5 watts of power. The IPA can detect whether a device is PoE-capable before supplying power, preventing damage to non-compliant devices.

The IPA has two RJ-45 female connectors: one for LAN input and one for powered LAN output. The LAN input connector links the IPA to the Ethernet LAN or a network switcher, hub, or router. The powered LAN output connector links to the network device.

The IPA has several LEDs that indicate power status. The power indicator LED lights green when power is input to the IPA. The Power over Ethernet indicator LED lights green if the connected network device is IEEE 802.3af compliant.

User’s Guide
Extron Electronics, USA
1230 South Lewis Street
Anaheim, CA 92805
USA
714.491.1500
Fax 714.491.1517
Extron Electronics, Europe
Beeldschermweg 6C
3821 AH Amersfoort
The Netherlands
+31.33.453.4040
Fax +31.33.453.4050
Extron Electronics, Asia
135 Joo Seng Road, #04-01
PM Industrial Building
Singapore 368363
+65.6383.4400
Fax +65.6383.4664
Extron Electronics, Japan
Daisan DMJ Building 6F
3-9-1 Kudan Minami
Chiyoda-ku, Tokyo 102-0074 Japan
+81.3.3511.7655
Fax +81.3.3511.7656
www.extron.com
© 2003 Extron Electronics. All rights reserved.
Specifications
In-Circuit Power Adapter
68-739-01 Rev. B
Printed in the USA
09 03
IPA T IPA
Data rate ........................................ 10/100Base-T, half/full duplex with
autodetect
Power
Input .................................. 100VAC to 240VAC, 50/60 Hz, 15 watts,
external, autoswitchable; to 48VDC, 0.3 A
power supply
Output ............................... IEEE 802.3af compliant
Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) /
10% to 90%, non-condensing
Operating +32° to +122°F (0° to +50°C) /
10% to 90%, non-condensing
Rack mount .................................. Yes, with optional 1U rack shelf, part
#60-190-01, or the VersaTools rack shelf,
part #60-190-20;
also under-furniture mountable with
optional brackets #70-212-01
or projector mountable with optional
brackets #70-217-01/70-077-04
Enclosure type .............................. Metal
Enclosure dimensions ................. 1.7" H x 2.2" W x 3.0" D (1U high, one-
eighth rack width)
4.3 cm H x 5.6 cm W x 7.6 cm D
(Depth excludes connectors.)
Product weight ............................. 0.5 lbs (0.2 kg)
Shipping weight ........................... 1 lbs (1 kg)
Vibration ....................................... ISTA/NSTA 1A in carton (International
Safe Transit Association)
Listings .......................................... UL, CUL
Compliances ................................. FCC Class A
MTBF ............................................. 30,000 hours
Warranty ....................................... 3 years parts and labor
Specifications are subject to change without notice.
Included Parts
Part Description Part Number
IPA T IPA In-Circuit Power Adapter 60-545-01
User’s guide
IPA T IPA • InstallationIPA T IPA • Installation
Installation
32
The Extron IPA T IPA In-Circuit Power Adapter (IPA) is an IPL™
Accessory product in the IP Tools series. Power for network
devices is not always available or nearby. The IPA supplies Power
over Ethernet (PoE) and is IEEE 802.3af compliant. PoE allows
power to be supplied to network devices using the existing
Ethernet cable. The IPA has the added flexibility of being able to
first detect whether a device on the network has PoE capability
before supplying power. This detection feature prevents damage to
network devices that are not compliant with the current IEEE
802.3af standard for PoE.
L
A
N
I
N
1
0
/
1
0
0
M
p
s
E
T
H
E
R
N
E
T
O
N
L
Y
P
O
W
E
R
E
D
L
A
N
O
U
T
PWR
N
O
T
E
:
C
O
M
1
L
A
N
U
ID
#
0
9
3
0
1
2
0
5
2
P
O
W
E
R
1
2
V
.
5
A
M
A
X
C
O
M
1
T
X
R
X
T
X
R
X
C
O
M
2
C
O
M
2
L
A
N
P
O
W
E
R
1
2
V
.
5
A
M
A
X
L
A
N
L
A
N
L
A
N
L
A
N
Extron
IPL T S2
Ethernet Control
Interface
Extron
IPA T IPA
In-Circuit Power
Adapter
Ethernet Switch
Powered
LAN Out
LAN/WAN
Network/
Internet
Projector
RS-232
Extron
48V Power Supply
External
Power Supply
Example IPA T IPA Application
Front and Rear Panels Features
IPA T IPA
LAN IN
10/100Mbps
ETHERNET ONLY
POWERED LAN
OUT
PWR
NOTE:
1
Front Panel
2 3 4
Rear Panel
1
Power indicator — The LED lights green when power is
input to the IPA T IPA.
2
LAN input — This female RJ-45 connector links the In-
Circuit Power Adapter either directly to the Ethernet LAN
or through a network switcher, hub, or router. Use a
straight-through cable when connecting to a switcher, hub,
or router.
3
Power over Ethernet indicator — The LED lights green if
the connected network device is IEEE 802.3af compliant.
If +12VDC is already being supplied to the IPL T device,
the IPA T IPA’s powered LAN output port will not supply
power until the +12VDC is removed. Under this
condition, if the +12VDC is removed while the PoE
connection is present, the IPL T device will power off and
then back on causing a complete restart of all running
scripts. The green LED will light, indicating power is
being sent from the IPA T IPA to the IPL T device.
4
LAN output — This female RJ-45 connector links to the
network device, and the IPA determines if the network
device is able to accept PoE. If it is PoE capable, the
supplied power will be IEEE 802.3af compatible.
Mounting Options
VersaTools
Rack Shelf
Quarter Rack Width
False Front Face Plate
(2) 4-40 x 3/16"
Screws
Eighth Rack Width
False Front Face Plate
I
P
A
T
I
P
A
I
P
A
T
I
P
A
I
P
A
T
I
P
A
I
P
A
T
I
P
A
I
P
A
T
I
P
A
Mounting in a
Versa Tools
Rack Shelf
IPA T IPA
Mounting Under a
Desk or Tabletop
Specifications
General
Connectors ................................... 1 RJ-45 female connector for pass-through
input
1 RJ-45 female connector for power and
pass-through output
  • Page 1 1
  • Page 2 2

Extron electronics 60-545-01 User manual

Brand
Extron electronics
Model
60-545-01
Category
Routers
Type
User manual
This manual is also suitable for

Extron Electronics 60-545-01 is an In-Circuit Power Adapter (IPA) that provides Power over Ethernet (PoE) to network devices. It is IEEE 802.3af compliant and can supply up to 12.5 watts of power. The IPA can detect whether a device is PoE-capable before supplying power, preventing damage to non-compliant devices.

The IPA has two RJ-45 female connectors: one for LAN input and one for powered LAN output. The LAN input connector links the IPA to the Ethernet LAN or a network switcher, hub, or router. The powered LAN output connector links to the network device.

The IPA has several LEDs that indicate power status. The power indicator LED lights green when power is input to the IPA. The Power over Ethernet indicator LED lights green if the connected network device is IEEE 802.3af compliant.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents