Pole Mount Adaptor
TANNOY Pole Mount Adaptors facilitate the installation
and mounting of speakers onto beams, poles and posts,
providing robust support in both indoor and outdoor
applications. Pole Mount Adaptors can be used with
standard TANNOY yoke brackets or K-Ball brackets.
Pole Mount Adaptors are available in black and white or they
can be painted to match the surrounding space. The adapter
will x to poles ranging from 77 to 228 mm diameter.
Installation Using Yoke Brackets
• • Use the xings supplied with your speaker to x the
empty yoke bracket to the un-mounted pole bracket
adaptor. (Di erent speaker models require di erent
numbers of xing screws. Refer to your speakers’
documentation for details.)
• • Fix the pole mount bracket adaptor to the pole using
the strapping provided. The bracket can be mounted
in portrait or landscape orientations.
• • See the main product QSG for further speci c
information about proper connection and xings for
your speaker.
Installation Using K-Ball
Brackets
• • Pass the speaker wire through the un- xed pole
mount adaptor plate.
• • Connect the speaker wires to the connector block
in the rear of the K-Ball bracket. (See the K-Ball
documentation for speci c connection instructions.)
• • O er the K-Ball bracket up to the adaptor plate
(if outdoors, with the foam gasket squeezed in
between, if outdoors).
MUSIC Group accepts no liability for any loss which may be
su ered by any person who relies either wholly or in part upon
any description, photograph, or statement contained herein.
Technical speci cations, appearances and other information
are subject to change without notice. All trademarks are the
property of their respective owners. MIDAS, KLARK TEKNIK,
LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND, TC ELECTRONIC,
TC HELICON, BEHRINGER, BUGERA and DDA are trademarks or
registered trademarks of MUSIC Group IP Ltd. © MUSIC Group IP
Ltd. 2016 All rights reserved.
For the applicable warranty terms and conditions and additional
information regarding MUSIC Group’s Limited Warranty, please
see complete details online at music-group.com/warranty.
•
• Fix the K-Ball
bracket to the pole mount adaptor
(use the xings supplied with the K-Ball bracket).
•
• Fix the pole mount bracket adaptor to the pole using
the provided strapping. The bracket can be mounted
in portrait or landscape orientations.
•
• See the main product QSG for further speci c
information about proper connection and xings for
your speaker.
•
• Please refer to the main product QSG for further
information about speci c speaker models.
/
