MODEL NO:
PEN1201
Quick Installation Guide
Wi-Fi Extender
Version 1.00
(English / Indonesian)
BEFORE GETTING STARTED
This document is designed to aid you to get started with the device. If you experience problems
following these guides or need further information pertaining to the device, please visit our website
at www.prolink2u.com. All specifications are subject to the manufacturer’s configuration at the time
of shipping and may change without prior notice, written or otherwise.
Worldwide Customer Care Centers
SINGAPORE Office (Head Office)
FIDA INTERNATIONAL (S) PTE LTD
Walk-In : Block 16 Kallang Place #06-02, Kallang Basin Industrial Estate,
Singapore 339156.
Email Support : [email protected]
MALAYSIA Office
FIDA SYSTEMS (M) SDN BHD
Walk-In : 29 Jalan USJ 1/31, 47600 Subang Jaya, Selangor Darul Ehsan, Malaysia.
Email Support : [email protected]
INDONESIA Office
PT PROLiNK INTIDATA NUSANTARA
Walk-In : Jl. Cideng Barat No. 79, Jakarta Pusat 10150, Indonesia.
Email Support : [email protected]
Technical Support Hotline
SINGAPORE : +65 6357 0666
MALAYSIA : +60 3 8023 9151
INDONESIA : +62 21 3483 1717
Note: Closed on Saturdays, Sundays and local/regional Public Holidays.
PROLiNK® is a trademark of FIDA INTERNATIONAL (S) PTE LTD and is manufactured under its authority. All
other brands, products, services, logos and company names mentioned herein are trademarks of their
respective owners. All specifications, designs and contents are subject to changes without prior notice.
© Copyright 2019. PROLiNK® all rights reserved.
Register Online For Your Product Warranty @ www.prolink2u.com/register
Select the Wireless SSID you intend to connect and enter the password.
5.
The PEN1201’s SSID will be auto set to follow the selected Wireless SSID
name with additional suffix “-ext” as a differentiator. You may change this
value according to your personal preference. Note that the PEN1201’s Wireless
Password (Wireless Key) will be the same as the selected Wireless SSID.
6.
Click the Save button to finish the setup wizard. Note that you will be
disconnected temporarily as the settings are being set.
Wait for about 60 seconds until the Status indicator and Wi-Fi Signal
Strength indicator lit up and you can connect to the PEN1201’s SSID.
7.
8.
1. Overview
2. Package Contents
3. Product Overview
This Quick Installation Guide is to setup PROLiNK PEN1201 for internet
connection. PROLiNK PEN1201 comes with multiple operation modes -
Repeater, Access Point and Router. In this Quick Installation Guide, we will
describe how to setup PROLiNK PEN1201 as Repeater mode.
1
2
3
4
5
7
8 9
6
Front View Left View Right View Rear View Bottom View
One (1) unit of PEN1201 Wi-Fi Extender
1
One (1) unit of RJ45 Ethernet Cable
2
3
One (1) piece of Quick Installation Guide (QIG)
1 2 3
WPS Button
• To connect with Wi-Fi Client: Press and release
• To connect with an existing Router’s Wi-Fi: Press and hold for 6 seconds
1
Status Indicator
3
Operation Mode switch (Repeater, Access Point and Router)
• Top position: Access Point (AP) Mode • Middle position: Repeater Mode
• Bottom position: Router Mode
4
Wi-Fi Signal Strength Indicator
2
Physical Interface
LED Indicators
4. Installation
Working StatusStatus
OFF
ON
Fast blinking
Slow blinking
One LED Bar
Two LED Bar
Three LED Bar
Status
Wi-Fi Signal
Strength
Extender is turned Off / No Power
Extender is turned On
Extender is having data transmission
Triggering WPS
Low Wi-Fi signal strength
Good Wi-Fi signal strength
Excellent Wi-Fi signal strength
Indicator
Step 1: Hardware Setup
2. Plug in PEN1201 into electrical outlet.
3.
Switch On the electrical outlet and wait about 30 seconds until Status indicator
lit up solid Green.
1. Set Operation Mode Switch to Repeater mode and Power Switch to ON.
Power Switch
• Top position: Turn OFF Extender • Bottom position: Turn ON Extender
6
9
LAN Port
8
WAN/LAN Port
7
AC Power Input
RESET Button
• To reboot: Press and release
• To do Factory Reset to Default: Press and hold for 12 seconds
5
RESET
OFF
ON
AP
Repeater
Router
There are two methods to setup Repeater mode for PEN1201 - physical WPS
Button or Web Configuration. If your existing router does not support for WPS
Button, you should use Method 2 to configure PEN1201.
To use WPS button option, ensure the router you intend to connect must also
have a WPS button.
Press the WPS button on your existing router.
Within 2 minutes, press and hold the PEN1201’s WPS button for 6 seconds.
The status indicator will begin slow blinking.
Pairing process takes approximately Two (2) minutes to complete and its
completion is indicated by both Status indicator and Wi-Fi Signal Strength
Indicator lit up.
Upon successful pairing, user can now connect to the PEN1201’s Wi-Fi
through its Default SSID (PROLiNK_XXXXXX) and password (prolink12345).
Step 2: Configuration
Method 1: With WPS Button
Notes:-
1) Both WPS button must be pressed within 2 minutes.
2) PEN1201’s SSID and password can be modified through Web Configuration after the
pairing process is complete.
2
Minutes
Within 2 Minutes
WPS
Wireless Router
PEN1201
1.
2.
3.
4.
Method 2: With Web Configuration
Click on the Repeater Wizard to begin Setup Wizard.
4.
Launch a web browser and key in the URL http://pen1201.setup or
default IP Address http://192.168.123.253 onto the address bar.
Enter the Username and Password to login (default username/password is
admin/password).
2.
3.
Connect to PEN1201 through wired or wireless connection.
1.
a) For wired connection: Connect the PC/Laptop over to the PEN1201’s LAN
Port.
b)
For wireless connection: Connect the Wi-Fi client over to the PEN1201’s
default SSID (PROLiNK_XXXXXX) with the default password (prolink12345).
Devices PEN1201
In between dead
zone and router
Router
Place the PEN1201 in between your router and your Wi-Fi dead zone.
Plug in PEN1201 into an electrical outlet and switch On. Wait until the Wi-Fi
Signal Strength indicator lights up, relocate PEN1201 closer to the router if
the Wi-Fi Signal Strength indicator lights up less than three bars.
1.
2.
Note:-
The Wi-Fi Signal Strength indicates the link quality once PEN1201 is connected to the
existing router or access point. It is recommended to achieve Three LED bars which
illustrate reliable connectivity between the PEN1201 and existing router or access point.
Step 3: Placement Guide
1. Penjelasan
2. Isi Kemasan
3. Penjelasan Produk
Buku Panduan ini adalah untuk mengatur PROLiNK PEN1201 koneksi internet.
PROLiNK PEN1201 hadir dengan beberapa mode operasi - Repeater, Access
Point dan Router. Dalam Buku Panduan ini, kami akan menjelaskan cara
mengatur PROLiNK PEN1201 sebagai mode Reapeater.
Antara Muka Fizikal
Indikator LED
1
2
3
4
5
7
8 9
6
Tampak
depan
Tampak
sebelah Kiri
Tampak
sebelah Kanan
Tampak
Belakang
Tampak
Bawah
Status Saat berjalanStatus
OFF
ON
Bekedip cepat
Berkedip lambat
Satu bar LED
Dua bar LED
Tiga bar LED
Status
Kekuatan
signal Wi-Fi
Extender tidak aktif / tidak ada daya
Extender aktif
Transmisi data
Memicu WPS
Kekuatan signal Wi-Fi rendah
Kekuatan signal Wi-Fi baik
Kekuatan signal Wi-Fi sangat bagus
Indikator
4. Instalasi
Langkah 1: Instalasi Perangkat
2. Colokkan PEN1201 ke outlet listrik.
3. Hidupkan outlet listrik dan tunggu sekitar 30 detik hingga Indikator
Status menyala hijau.
1.
Atur Operation Mode Switch ke mode Repeater dan Switch Power ke ON.
Ada dua metode untuk mengatur mode Repeater PEN1201 - Tombol WPS fisik
atau Konfigurasi Web. Jika router Anda yang ada tidak mendukung untuk
Tombol WPS, Anda harus menggunakan Metode 2 untuk mengkonfigurasi
PEN1201.
Langkah 2: Konfigurasi
Untuk menggunakan opsi tombol WPS, pastikan router yang ingin Anda
hubungkan juga harus memiliki tombol WPS.
Metode 1: Dengan tombol WPS
Catatan:-
1) Kedua tombol WPS harus ditekan dalam 2 menit.
2) SSID PEN1201 dapat dimodifikasi melalui Konfigurasi Web setelah proses
pemasangan selesai.
One (1) unit of PEN1201 Wireless-N Extender
1
One (1) unit of RJ45 Ethernet Cable
2
3
One (1) piece of Quick Installation Guide (QIG)
1 2 3
Tombol WPS
• Untuk terhubung dengan Wi-Fi Client: Tekan dan lepaskan
• Untuk terhubung dengan Wi-Fi Router yang ada: Tekan dan tahan
selama 6 detik
1
Indikator signal Wi-Fi
2
Indikator Status
3
Saklar mode Operasi (Repeater, Access Point and Router)
• Posisi Atas: Mode Access Point (AP)
• Posisi Tengah: Mode Repeater
• Posisi Bawah: Mode Router
4
Tombol Reset
• Untuk reboot: Tekan dan lepaskan
• Untuk melakukan Factory Reset ke Default:
Tekan dan tahan selama 12 detik
5
9
Port LAN
8
Port WAN/LAN
7
Input Power AC
6
Switch Power
• Posisi teratas: Extender tidak aktif
• Posisi bawah: Extender aktif
Tekan tombol WPS pada router Anda.
Dalam 2 menit, tekan dan tahan tombol WPS pada PEN1201 selama 6 detik.
Indikator status akan mulai berkedip lambat.
Proses pemasangan membutuhkan waktu sekitar Dua (2) menit untuk
menyelesaikan dan penyelesaiannya ditunjukkan oleh indikator Status dan
Indikator Kekuatan Sinyal Wi-Fi menyala.
Setelah pemasangan berhasil, pengguna sekarang dapat terhubung ke
Wi-Fi PEN1201 melalui SSID Default (PROLiNK_XXXXXX) dan kata sandi
(prolink12345).
1.
2.
3.
4.
Metode 2: Dengan Konfigurasi Web
Klik Repeater Wizard untuk memulai Setup Wizard.
4.
Luncurkan browser web dan masukkan http://pen1201.setup atau
http://
192.168.123.253
ke kolom alamat
.
Masukkan nama Username dan kata sandi
(username / kata sandi standar adalah admin / password).
2.
3.
Hubungkan klien ke PEN1201 melalui koneksi kabel atau nirkabel.
1.
a) Untuk koneksi kabel: Sambungkan PC / Laptop ke Port LAN PEN1201.
b) Untuk koneksi nirkabel: Hubungkan klien Wi-Fi ke PEN1201 SSID default
(PROLiNK_XXXXXX) dengan kata sandi standart (prolink12345)
2
Minutes
Dalam 2 menit
WPS
Wireless Router
PEN1201
Perangkat PEN1201
Antara Router dengan
daerah yang tidak tercover
Router
Tempatkan PEN1201 di antara router Anda dan daerah yang tidak tercover
Wi-Fi Anda.
Hubungkan PEN1201 ke outlet listrik dan nyalakan. Tunggu hingga
indikator Kekuatan Sinyal Wi-Fi menyala, pindahkan PEN1201 lebih dekat
ke router jika indikator Kekuatan Sinyal Wi-Fi menyala kurang dari tiga bar.
1.
2.
Catatan:-
Kekuatan Sinyal Wi-Fi menunjukkan kualitas tautan begitu PEN1201 terhubung ke router
atau Access Point. Disarankan untuk mencapai Tiga bar LED yang menggambarkan
konektivitas yang adal antara PEN1201 dan router atau access Point yang ada.
Langkah 3: Panduan Penempatan
RESET
OFF
ON
AP
Repeater
Router
Pilih SSID Nirkabel yang ingin Anda sambungkan dan masukkan kata sandi.
5.
SSID PEN1201 akan diatur secara otomatis untuk mengikuti nama SSID
Nirkabel yang dipilih dengan akhiran tambahan "-ext" sebagai
pembedaan. Anda dapat mengubah nilai ini sesuai dengan preferensi
pribadi Anda. Perhatikan bahwa Kata Sandi Nirkabel (Kunci Nirkabel)
PEN1201 akan sama dengan SSID Nirkabel yang dipilih.
6.
Klik tombol Save untuk menyelesaikan wizard pengaturan. Perhatikan
bahwa Anda akan terputus sementara karena pengaturan sedang diatur.
Tunggu sekitar 60 detik hingga indikator Status dan indikator Kekuatan
Sinyal Wi-Fi menyala dan Anda dapat terhubung ke SSID PEN1201.
7.
8.
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
PROLINK GM-1001 User manual
-
PROLINK PKCS-1008 User guide
-
-
-
PROLINK PRN3006L-V Quick start guide
-
-
-
-
-