Uniden UDVR85X8 Reference guide

Type
Reference guide

This manual is also suitable for

UNIDEN
DIGITAL VIDEO RECORDER
UDVR45X4, UDVR85X4,
AND UDVR85X8
QUICK START GUIDE
This Quick Start Guide provides basic installation
and setup procedures. For full details on UDVR
system operations, go to www.uniden.com and
download the detailed UDVR User Manual and to the
UDVR product page to get the latest firmware.
GETTING STARTED
You will need:
A monitor or TV that supports VGA or HDMI input
Screwdriver/power drill for mounting cameras
WHAT’S IN THE BOX
UDVR Receiver Cameras - 4 or 8 Camera Power
supply - 1 or 2
HDMI cable (6 ft) BNC/Power Camera
Cables (100 ft)
- 4 or 8
DVR Power
supply
1 TB Hard Drive
(installed)
1 Ethernet cable
(6 ft)
USB Mouse
Camera/Power
Splitter Cable
Quick Start Guide Hex Keys
If any items are missing or damaged, contact our
Customer Care Line immediately at 800-658-8063.
Never use damaged products!
Need help? Get answers 24/7 at our website:
www.uniden.com.
HARDWARE CONNECTIONS
CONNECT CAMERA TO UDVR RECEIVER AND TO POWER
1. Connect camera’s video out to BNC/Power Camera
video connector and connect camera’s power
connector BNC/Power Camera power connector.
The BNC connectors are labeled Camera side and
DVR side.
2. Connect video connector on other end of BNC/Power
Camera cable to DVR receiver camera port.
3. Connect power connector on other end of BNC/Power
Camera cable to one power connector on the Power/
Splitter cable.
4. Connect Power/Splitter cable to Power Adapter and
plug Power Adapter into wall outlet.
5. Repeat with other cameras.
Connect each camera and cable to the DVR and
verify operation before physically installing in its
final location.
CONNECT MOUSE
Plug the mouse into the DVR receiver USB port labeled USB
MOUSE.
CONNECT ROUTER
Connect the router’s ethernet cable to the DVR receiver’s
RJ45 slot.
CONNECT VGA MONITOR OR HD TELEVISION TO DVR
RECEIVER
Connect the DVR receiver to an HD television or monitor,or
to a VGA monitor.
Connecting to HD Television or Monitor
1. Plug an HDMI cable into the DVR receiver’s HDMI port.
2. Plug the other end into the HDMI port on the
television.
3. Plug the HD TV’s power cable into power.
Connecting to VGA PC Monitor
1. Plug a VGA cable (not included) into the DVR receiver
port marked VGA.
VGA cable (cable NOT included)
between PC monitor and receiver.
HDMI Video Cable - into
an HD TV or HD monitor
Yellow video out cable to
your TV.
(Not recommended)
RS485 for PanTilt
Camera Support
(optional)
UDVR45x4 shown. UDVR85x8 equipped with
respective number of video inputs.
Router
(not included)
2. Plug the other end of the VGA cable into the similar
port on the back of the monitor.
3. Plug the monitor’s power cable into power. Live video
from your connected cameras will display on your
monitor.
LOG IN
Log into the system to access all menus and features.
When the UDVR hardware and cameras are connected and
powered on, live video displays on the monitor screen.
1. Using the mouse, right-click
anywhere on the screen. The
Menu List
displays.
2. Select
Main Menu
. The
Login
screen displays.
3. The screen displays the default user name (admin)
and there is no default password. Select
Login
.
It is strongly recommended you add a password to
the admin account and to all other accounts you
may add to the system.
To add the password, right click on mouse and go
to Main Menu/Setup/Users. (This is also where you
can add additional User accounts.)
4. The
LIVE video
screen displays again.
SET DVR TIME
IMPORTANT! Do not skip this step! You must set the
date and time for recorded video files to be correctly
tagged. If they are not tagged correctly, the Search
Files functions will not work properly.
1. From the
Menu List
, select
Main Menu/Setup/Basic
. The
Basic
screen displays.
2. Select
Date & Time
tab.
3. Set the date.
4. Set the time. Select
OK
from the pop up number
keypad when you set the time.
5. Select
Apply
to save the date and time and return to
the previous screen.
REMOTE ACCESS
View live and recorded video remotely using an iOS or
Android device and Uniden’s ProHD App.
1. From the Apple App Store, Google
Play, or the Amazon App store,
download the Uniden ProHD app.
2. Open the app. The
Create Account
screen displays.
3. Complete the fields and then select
OK
. The
Device List
screen displays.
4. Select the + icon at the top right
corner to add your DVR system
to the app. The
Add Device
screen
displays.
5. Name your DVR system. Select
the QR code icon and scan the QR
code label on top of the DVR box or
the applicable QR code from
Main
Menu/ Information/System
screen on
the monitor. This will add the DVR
Device ID code to the app. Select
OK
.
6. The
Device List
displays again, with
your system now listed. Select your
system and live video displays on
your device.
Go to www.uniden.com to download the complete
User’s Manual and to the UDVR product page to get
the latest firmware.
© 2015 Uniden America Corporation Issue 1, June 2015
Irving, Texas
Information in this document is subject to change without notice.
  • Page 1 1
  • Page 2 2

Uniden UDVR85X8 Reference guide

Type
Reference guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI