2. CyberPower
  3. ATS PDU

CyberPower ATS PDU Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the CyberPower ATS PDU Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ATS PDU Firmware Upgrade Instructions
(Example using ExtraPutty)
By upgrading the Firmware, you can obtain new features, updates
and improvements to existing functionality.
Follow these steps to upgrade the firmware.
1. Download ExtraPutty from www.extraputty.com/download.php.
2. Open Putty, set the Baud Rate speed to 38400 and click Open.
3. Type the command @new.
4. Press “1” to select ATS PDU upgrade.
5. Select Files Transfer > Ymodem > Send.
6. Select the firmware file version to update. Verify it is
the correct file, for example: cpsatsmafw_xxx.bin.
7. After uploading the binary file, PuTTY will display a
successful completion message and retun to the login
prompt.
Copyright © 2017 Cyber Power Systems, Inc. All rights reserved.
Cyber Power Systems, Inc.
www.cyberpower.com
Note: If other Hyper Terminal software is performed, please
setup the COM port settings using following values.
* Bits per second: 38400
* Data bits: 8
* Parity: None
* Stop bits: 1
* Flow control: None
/