Sennheiser Electronic Corp RS 180 User manual

Brand: Sennheiser Electronic Corp

Model: RS 180

Category: Headphones

Type: User manual

This manual is also suitable for

DMOTR180

ÎÍ ïèð

Ü·¹·¬¿´ É·®»´»-- Í§-¬»³

×²-¬®«½¬·±² ³¿²«¿´

PDF 檔案使用 "pdfFactory Pro" 試用版本建立 www.ahasoft.com.tw/FinePrint

Contents

Important safety information ........................................................................... 2

The RS180 digital RF headphone system ...................................................... 4

Delivery includes .................................................................................................. 5

Product overview ................................................................................................. 6

Overview of the HDR 180 headphones ..................................................... 6

Overview of the TR 180 transmitter .......................................................... 7

Overview of the indicators and acoustic signals ..................................... 8

Overview of the connection stages .......................................................... 10

Putting the RS180 into operation ................................................................. 11

Setting up the transmitter ......................................................................... 11

Connecting the transmitter to a sound source ...................................... 12

Connecting the transmitter to the mains ............................................... 16

Inserting and changing the rechargeable batteries ............................. 17

Charging the headphones rechargeable batteries ............................... 18

Adjusting the headband of the headphones ......................................... 18

Using the RS180 ............................................................................................... 19

Switching the transmitter on and off ...................................................... 19

Switching the headphones on and off .................................................... 21

Adjusting the volume on the headphones ............................................. 22

Muting the headphones ............................................................................. 22

Adjusting the sound of the RS180 to your needs ................................ 23

Associating the headphones to the transmitter ................................... 25

Listening with several headphones simultaneously ............................ 28

Cleaning the RS180 .......................................................................................... 29

If a problem occurs ... ........................................................................................ 30

Accessories and spare parts ............................................................................ 32

Specifications ...................................................................................................... 33

Manufacturer declarations ............................................................................... 34

PDF 檔案使用 "pdfFactory Pro" 試用版本建立 www.ahasoft.com.tw/FinePrint

Important safety information

! Please read this instruction manual carefully and completely before

using the product.

! Make this instruction manual easily accessible to all users at all times.

Always include this instruction manual when passing the product on to

third parties.

! Do not use the product in situations which require special attention

(e.g. in traffic or when performing skilled jobs).

! Always keep the product dry and do not expose it to extreme

temperatures (normal operating temperatures: 0°C/32 °F to 40 °C/

104 °F).

! Use the product with care and store it in a clean, dust-free

environment.

! Switch the headphones off after use to conserve battery power.

Remove the batteries if the product will not be used for extended

periods of time.

! The headphones contain magnets that generate a magnetic field which

could cause interference with cardiac pacemakers and implanted

defibrillators. Keep the headphones at least 1.2# (3cm) from cardiac

pacemakers or implanted defibrillators.

! Please protect your hearing from high volume levels. Sennheiser

headphones also sound exceptionally good at low volumes.

! Only use the Sennheiser supplied power supply units.

! To reduce the risk of fire or electric shock, do not use the product near

water and do not expose it to rain or moisture.

! Unplug the power supply unit from the wall socket

$ to completely disconnect the product from the mains

$ during lightning storms or

$ when unused for long periods of time.

! Only operate the power supply unit from the type of power source

specified in the chapter %Specifications# (see page33).

! Ensure that the power supply unit is

$ in a safe operating condition and easily accessible,

$ properly plugged into the wall socket,

$ only operated within the permissible temperature range,

$ not covered or exposed to direct sunlight for longer periods of time

in order to prevent heat accumulation (see %Specifications# on

page33).

! Do not operate the product near any heat sources.

! Only use attachments/accessories specified by Sennheiser (see

%Accessories and spare parts# on page32).

PDF 檔案使用 "pdfFactory Pro" 試用版本建立 www.ahasoft.com.tw/FinePrint

Important safety information

Replacement parts

When replacement parts are required, be sure the service technician uses

replacement parts specified by Sennheiser or those having the same

characteristics as the original part. Unauthorized substitutions may result

in fire, electric shock, or other hazards.

Intended use

Intended use of the product includes

! having read this instruction manual, especially the chapter %Important

safety instructions# on page 2,

! using the product within the operating conditions and limitations

described in this instruction manual.

%Improper use# means using the product other than as described in this

instruction manual, or under operating conditions which differ from those

described herein.

Safety instructions for the NiMH rechargeable batteries

If abused or misused, the rechargeable batteries may leak. In extreme

cases, they may even present

Please understand that Sennheiser does not accept liability for damage

arising from abuse or misuse.

! a heat hazard,

! a fire hazard,

! an explosion hazard,

! a smoke or gas hazard.

Keep away from

children.

Only use rechargeable batteries

recommended by Sennheiser.

Observe correct polarity. Do not short-circuit.

Do not expose to

moisture.

Switch rechargeable battery-

powered products off after use.

Do not pack charged

batteries loose $ danger

of shorting out/fire

hazard.

When not using rechargeable

batteries for extended periods

of time, charge them regularly

(about every 3 months).

Only charge

rechargeable batteries

at ambient

temperatures between

10 °C/50 °F and 40 °C/

104 °F.

Do not heat above 70 °C/

158 °F, e.g. do not expose to

sunlight or throw into a fire.

Do not mutilate or

dismantle.

Do not continue to use

defective rechargeable

batteries.

Immediately remove

rechargeable batteries

from obviously

defective devices.

Dispose of rechargeable

batteries at special collection

points or return it to your

specialist dealer.

PDF 檔案使用 "pdfFactory Pro" 試用版本建立 www.ahasoft.com.tw/FinePrint

The RS180 digital RF headphone system

The RS180 is an RF stereo hi-fi headphone system with comprehensive

technical features. Its transparent and balanced sound image with

excellent bass response makes this system an ideal choice for hi-fi, home

cinema and TV use.

The rechargeable batteries can conveniently be recharged while in the

headphones. Enjoy total freedom of sound, stylish design and maximum

comfort.

Additional features of the RS180 headphone system

! Transmits uncompressed audio over a robust 2.4 GHz digital link,

enabling you to enjoy your music without the hassles of cables.

! Dynamic transducer systems with powerful neodymium magnets

deliver clear and detailed audio reproduction.

! Kleer s uncompressed digital wireless transmission delivers CD-quality

sound.

! No set-up required $ just plug and play. Simply connect the transmitter

to your personal audio/video player, put on the headphones and turn

it on!

! TR180 transmitter with multi-receiver capability, enabling up to

4people to listen to the same sound source.

Kleer

wireless transmission technology

The RS180 headphone system features the digital wireless audio

transmission technology from Kleer. The Kleer company has developed an

RF-based wireless transmission standard (of the same name) that offers

lossless audio transmission in CD-quality while consuming minimal power.

PDF 檔案使用 "pdfFactory Pro" 試用版本建立 www.ahasoft.com.tw/FinePrint

Delivery includes

1HDR180 headphones

1TR180 transmitter

1power supply unit with country adapters

1stereo audio cable with 3.5 mm jack plugs

1adapter 3.5 mm jack socket to ¼% (6.3 mm) jack plug

1adapter 3.5 mm jack socket to 2 RCA plugs

2AAA size NiMH rechargeable batteries, 1.2 V

1cable dresser

1cable binder

1quick guide incl. CD ROM with detailed instruction manual (PDF file)

1safety guide

PDF 檔案使用 "pdfFactory Pro" 試用版本建立 www.ahasoft.com.tw/FinePrint

Product overview

Overview of the HDR 180 headphones

Headband VOLUME + button

Charging contacts Multi-function button

Ear pads VOLUME $ button

Battery compartments BALANCE L button

BALANCE R button

Multi-function LED

With the multi-function button , you can switch the

headphones on/to standby mode, set the headphones to multi-user

operation, mute the headphones and associate the headphones

PDF 檔案使用 "pdfFactory Pro" 試用版本建立 www.ahasoft.com.tw/FinePrint

Product overview

Overview of the TR 180 transmitter

CHARGE LED, orange

ALC button, backlit in green

Multi-function button, backlit in green

Charging contacts for charging the headphones

RCA output (LINE OUT R, LINE OUT L)

Audio input (AUDIO IN)

ATTENUATOR switch

Socket for power supply unit (DC 5V 0.5A)

Cable dresser

With the multi-function button , you can switch the

transmitter on/to standby mode, set the transmitter to multi-user

operation and associate the transmitter.

PDF 檔案使用 "pdfFactory Pro" 試用版本建立 www.ahasoft.com.tw/FinePrint

Product overview

Overview of the indicators and acoustic signals

Meaning of the pictograms for the different LEDs

Indicators on the headphones

Status Meaning

The LED is lit.

The LED flashes once per second.

The LED flashes twice every 5 seconds.

Indicator Status Meaning

Multi-function LED The rechargeable batteries

are almost flat.

The headphones are in

enrollment mode

(searching for a

transmitter to pair with).

The headphones are in

association mode

(exchanging device

information with the

transmitter).

The headphones receive an

audio signal.

ï-

ë-

ï-

ë-

PDF 檔案使用 "pdfFactory Pro" 試用版本建立 www.ahasoft.com.tw/FinePrint

Product overview

Indicators on the transmitter

Acoustic signal of the headphones

Indicator Status Meaning

CHARGE LED The rechargeable batteries

are being charged.

off The rechargeable batteries

are fully charged.

ALC button Automatic level control is

activated.

Multi-function button

off The transmitter is in

standby mode.

The transmitter is in

enrollment mode

(searching for headphones

to pair with).

The transmitter is in

association mode

(exchanging device

information with the

headphones).

The transmitter is in

single-user operation.

The transmitter is in multi-

user operation.

1 short beep Meaning

The minimum volume is reached.

The maximum volume is reached.

The minimum balance is reached.

The maximum balance is reached.

ï-

ë-

PDF 檔案使用 "pdfFactory Pro" 試用版本建立 www.ahasoft.com.tw/FinePrint

Product overview

Overview of the connection stages

Connection establishment

Enrollmentmode When you switch the headphones and the transmitter on, the headphones

search for a suitable transmitter.

Pairing The headphones and the transmitter have recognized each other and the

headphones are paired with the transmitter.

Single-user and multi-user operation

Single-useroperation You can listen to your sound source via one pair of headphones. By default,

the transmitter is set to single-user operation (see page25).

Multi-useroperation In order to be able to listen to your sound source with several headphones

simultaneously, you have to set your transmitter to multi-user operation

(see page28).

ï-

ë-

PDF 檔案使用 "pdfFactory Pro" 試用版本建立 www.ahasoft.com.tw/FinePrint

Putting the RS180 into operation

Setting up the transmitter

Choose a suitable place near your sound source (e.g. TV, stereo or home

cinema system).

Do not place the transmitter close to metal objects such as shelf bars,

reinforced concrete walls, etc. as this can decrease the transmitter s

range.

Cable dresser

Snap the cable dresser into the opening at the rear of the

transmitter.

Dress the cables through the small slit of the cable dresser . The cable

dresser prevents the cables from slipping out of the sockets or being

kinked.

Use the cable binder to conceal the cables.

Ó«-·½

Ð¸±¬±-

Ê·¼»±-

Û¨¬®¿-

Í»¬¬·²¹-

Í¸«ºº´» Í±²¹-

It is not necessary that the transmitter and headphones are in the

same room, so you can move around freely in the home or outside

in the garden.

PDF 檔案使用 "pdfFactory Pro" 試用版本建立 www.ahasoft.com.tw/FinePrint

Putting the RS180 into operation

Connecting the transmitter to a sound source

You can connect the TR 180 transmitter to different sound sources, such

as a TV, a DVD player or a stereo system.

Switch your sound source off before connecting the transmitter.

Connect the audio cable to the audioinput of the transmitter.

Check the connection possibility of your sound source.

Follow the instructions in the corresponding chapter in order to connect

your transmitter to the sound source.

Chapter Connection possibility Type of socket

Headphone socket

RCA sockets (output)

ÔÎ

PDF 檔案使用 "pdfFactory Pro" 試用版本建立 www.ahasoft.com.tw/FinePrint

Putting the RS180 into operation

Connecting the transmitter to a headphone socket

Depending on your sound source, you have to change the setting of the

ATTENUATOR switch in order to optimally adjust the signal of the sound

source.

Adjust the volume of the headphone socket on your sound source to a

medium level. This improves the quality of wireless sound

transmission. If necessary, check the settings of your sound source.

Connect the audio cable to the headphone socket of your sound

source.

If the plug on the audio cable is too small for your headphone socket,

plug the adapter to ¼% (6.3 mm) jack plug onto the audio cable.

Ó«-·½

Ð¸±¬±-

Ê·¼»±-

Û¨¬®¿-

Í»¬¬·²¹-

Í¸«ºº´» Í±²¹-

Portable sound source

(MP3 player, mobile telephone)

Stationary sound source

(hi-fi system, amplifier)

Set the ATTENUATOR switch

to %0 dB#.

Set the ATTENUATOR switch

to %$8 dB#.

PDF 檔案使用 "pdfFactory Pro" 試用版本建立 www.ahasoft.com.tw/FinePrint

Putting the RS180 into operation

Connecting the transmitter to RCA sockets (output)

Depending on your sound source, you have to change the setting of the

ATTENUATOR switch in order to optimally adjust the signal of the sound

source.

Plug the adapter for RCA sockets onto the audio cable .

Connect the red connector of the adapter to the red socket R of your

sound source.

Connect the white connector of the adapter to the white or black

socket L of your sound source.

WARNING Danger of hearing damage due to high volumes!

You can suffer hearing damage if you are using other Kleer

compatible headphones without integrated volume control,

such as the Sennheiser MXW1, with the TR 180 transmitter:

In this case, do not connect the transmitter to the RCA

sockets (output) of your sound source, but to the

headphone socket of your sound source.

Before putting the headphones on, set the volume on the

sound source to a low level.

Ó«-·½

Ð¸±¬±-

Ê·¼»±-

Û¨¬®¿-

Í»¬¬·²¹-

Í¸«ºº´» Í±²¹-

Portable sound source

(MP3 player, mobile telephone)

Stationary sound source

(hi-fi system, amplifier)

Set the ATTENUATOR switch

to %0 dB#.

Set the ATTENUATOR switch

to %$8 dB#.

If your sound source has several RCA sockets, use the RCA outputs

(usually %Audio Out#).

PDF 檔案使用 "pdfFactory Pro" 試用版本建立 www.ahasoft.com.tw/FinePrint

Putting the RS180 into operation

Integrating the transmitter into an existing connection between devices

To integrate the transmitter into an existing connection between your

sound source and an additional device (e.g. an amplifier):

Check if the RCA cable of the additional device is connected to an input

(see the instruction manual of the device).

Connect the RCA cable of the additional device to the RCA output of

the transmitter.

The transmitter must remain connected to the mains. Otherwise,

the connection between your sound source and the additional

device will be interrupted.

PDF 檔案使用 "pdfFactory Pro" 試用版本建立 www.ahasoft.com.tw/FinePrint

Putting the RS180 into operation

Connecting the transmitter to the mains

Select the suitable country adapter for your wall socket.

Slide the country adapter onto the power supply unit until it locks

into place.

Connect the connector of the power supply unit to the socket .

Plug the power supply unit into a wall socket.

The transmitter switches on. The multi-function button flashes

green after 9 seconds. The transmitter is in enrollment mode.

ßË

ÛË ËÕ

ËÍ

ï-

PDF 檔案使用 "pdfFactory Pro" 試用版本建立 www.ahasoft.com.tw/FinePrint

Putting the RS180 into operation

Inserting and changing the rechargeable batteries

For powering the headphones, you can use:

! standard batteries (AAA size, 1.5V)

! NiMH rechargeable batteries (AAA size, 1.2V, 600mAh)

If you are using standard batteries, the headphones must not be placed on

the headphone holder/charger of the transmitter.

Remove the ear pads from both ear cups by turning the ear pads in

the direction of the arrow until you overcome a slight resistance.

Lift the ear pads off the ear cups.

Remove the depeleted rechargeable batteries (where applies).

Insert the rechargeable batteries. Observe correct polarity when

inserting the batteries.

Secure the ear pads to the ear cups.

PDF 檔案使用 "pdfFactory Pro" 試用版本建立 www.ahasoft.com.tw/FinePrint

Putting the RS180 into operation

Charging the headphones rechargeable batteries

Charge the rechargeable batteries for at least 16 hours prior to first time

use. Subsequent charging time is about half of the previous operating

time. The operating time is up to 24 hours.

Place the headphones on the headphone holder/charger of the

transmitter. Make sure that the headphones make good contact with

the charging contacts .

The rechargeable batteries are being charged. The CHARGE LED

lights up orange.

When the rechargeable batteries are fully charged, the CHARGE LED

goes off.

Adjusting the headband of the headphones

For good sound quality and best possible comfort, the headband has to be

adjusted to properly fit your head. To do so, adjust the headband via its

snap-in locking mechanism:

Wear the headphones so that the headband runs over the top of

your head.

Adjust the length of the headband so that

$ your ears are completely inside the earpads,

$ you feel even, gentle pressure around your ears,

$ a snug fit of the headband on the head is ensured.

CAUTION Danger of damage to the headphones!

If standard batteries are inserted into the headphones and

you place the headphones on the headphone holder/charger

of the transmitter, the batteries can leak and damage your

headphones.

Only place the headphones on the headphone holder/

charger of the transmitter, if rechargeable batteries are

inserted.

Always store the headphones on the headphone holder/charger to

ensure that they are fully charged when they are needed.

PDF 檔案使用 "pdfFactory Pro" 試用版本建立 www.ahasoft.com.tw/FinePrint

Using the RS180

To switch the product on and to listen to your sound source, proceed as

follows:

Switching the transmitter on and off

Switching the transmitter on

Press the multi-function button for approx. 1second.

The transmitter switches on. The multi-function button flashes

green, indicating that the transmitter is in enrollment mode.

Once the transmitter has found suitable headphones, it pairs with the

headphones and transmits an audio signal. The multi-function LED

of the headphones and the multi-function button of the

transmitter flash slowly.

Sequence of steps Page

1.Make sure that the rechargeable batteries are charged. 17

2.Switch your sound source on. $

3.Switch your transmitter on. 19

4.Switch your headphones on. 21

5.Adjust the desired volume. 22

ï-

ë-

PDF 檔案使用 "pdfFactory Pro" 試用版本建立 www.ahasoft.com.tw/FinePrint

Page is loading ...

Sennheiser Electronic Corp RS 180 User manual

Brand: Sennheiser Electronic Corp

Model: RS 180

Category: Headphones

Type: User manual

This manual is also suitable for

DMOTR180

Download PDF

report

Sennheiser Electronic Corp RS 180 User manual

This manual is also suitable for

Sennheiser Electronic Corp RS 180 User manual

Related papers

Other documents