ICP PDS-5105D-MTCP Quick Start

ICP
Brand
ICP
Model
PDS-5105D-MTCP
Type
Quick Start

ICP PDS-5105D-MTCP is a device that allows you to connect your computer to a programmable logic controller (PLC) over an Ethernet network and communicate with it using a virtual COM port. This can be useful for a variety of applications, such as monitoring and controlling industrial machinery, or reading and writing data from sensors and actuators.

The PDS-5105D-MTCP supports a variety of Ethernet protocols, including TCP/IP, UDP, and Modbus TCP. It also supports a variety of COM port settings, including baud rate, data bits, parity, and stop bits.

To use the PDS-5105D-MTCP, you will need to install the VxComm Utility software on your computer. This software will allow you to search for the device on the network, configure its Ethernet settings, and map it to a virtual COM port.

ICP PDS-5105D-MTCP is a device that allows you to connect your computer to a programmable logic controller (PLC) over an Ethernet network and communicate with it using a virtual COM port. This can be useful for a variety of applications, such as monitoring and controlling industrial machinery, or reading and writing data from sensors and actuators.

The PDS-5105D-MTCP supports a variety of Ethernet protocols, including TCP/IP, UDP, and Modbus TCP. It also supports a variety of COM port settings, including baud rate, data bits, parity, and stop bits.

To use the PDS-5105D-MTCP, you will need to install the VxComm Utility software on your computer. This software will allow you to search for the device on the network, configure its Ethernet settings, and map it to a virtual COM port.

The package includes the following items:
1. Power Supply: +10 ~ +30 VDC (Ex: DP-665)
http://www.icpdas.com/products/Accessories/power_supply/power_list.htm
2. Ethernet Hub (Ex: NS-205)
http://www.icpdas.com/products/Switch/industrial/industrial_list.htm
3. Make sure your PC has workable network settings.
4. Disable or well configure your Windows firewall and Anti-Virus
firewall first, else the “Search Servers” on page 3 may not
work. (Please contact with your system Administrator)
Quick Start Guide
(This Document)
For PDS-5105D-MTCP
English/November 2011/Version 1.0
What’s in the shipping package?
Preparations for Device
1
PDS-5105D-MTCP Quick Start Guide
PDS-5105D-MTCP
Software CD
CA-0910
Cable
Screwdriver
1. Connect both the PDS-5105D-MTCP and your computer to the
same sub network or the same Ethernet Switch.
2. Short the RxD and TxD pins (Pin4 and Pin5) of COM1 for self-
test.
3. Supply +10~+30 VDC power to the PDS-5105D-MTCP module.
Install VxComm Utility (V2.11.03 or later):
The software is located at:
CD: \NAPDOS\Driver\VxComm_Driver
http://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/vxcomm_driver/
Connecting the Power and Host PC
2
PDS-5105D-MTCP Quick Start Guide
Installing Software on Your PC
1. Double click the VxComm Utility shortcut on the desktop.
2. Click the “Search Servers” button to search your PDS-
5105D-MTCP.
3. Double click the name of PDS-5105D-MTCP to open the
configure server dialog box.
4. Contact your Network Administrator to obtain a correct
network configuration (such as IP/Mask/Gateway). Enter
the network settings and then click “OK” button. The PDS-
5105D-MTCP will use the new setting 2 seconds later.
Configuring Ethernet Settings
1. Double-Click
2. Click
3. Double Click
3
PDS-5105D-MTCP Quick Start Guide
4. Configure the
Ethernet settings
5. Click
5. Wait 2 seconds and then click the “Search Servers” button
again to ensure the PDS-5105D-MTCP is working well with new
configuration.
6. Click the “Add Server[s]” button. Assign a COM Port number
and click “OK” to save your settings.
1. Click
2. Click your PDS-5105D-MTCP
in the list
3. Click
4. Assign a COM
Port number
5. Click
4
PDS-5105D-MTCP Quick Start Guide
7. Click on PDS-5105D-MTCP name and check the virtual COM
port mappings on the PC.
8. Click “Tools” >> “Restart Driver”, and then click the
“Restart Driver” button.
8. Click
7. Click
5
PDS-5105D-MTCP Quick Start Guide
6. Check the COM Port
1. Right click Port 1 and then choose the “Open COM Port” item.
2. Check that the configuration of the COM Port is correct and
then click the “Open COM” button.
Testing your PDS-5105D-MTCP
6
PDS-5105D-MTCP Quick Start Guide
3. Click
1. Right Click
2. Click
3. Type a string in the send field then click the “Send” button. If
a response is received, it will be displayed in the received field.
4. If the test is successful, your COM port program is able to
work with this Virtual COM Port now.
Related Information
PDS-5105D-MTCP product page:
http://www.icpdas.com/products/Industrial/pds/PDS_Series_Main_Page.htm
DP-665 and NS-205 (optional) product page:
http://www.icpdas.com/products/Accessories/power_supply/power_list.htm
http://www.icpdas.com/products/Switch/industrial/industrial_list.htm
4. Click
5. Response Message
ICP DAS Web Site: http://www.icpdas.com
Contact Us (E-Mail): service@icpdas.com ,service.icpdas@gmail.com
Copyright @ 2011 by ICP DAS Co., Ltd. All Rights Reserved.
7
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

ICP PDS-5105D-MTCP Quick Start

ICP
Brand
ICP
Model
PDS-5105D-MTCP
Type
Quick Start

ICP PDS-5105D-MTCP is a device that allows you to connect your computer to a programmable logic controller (PLC) over an Ethernet network and communicate with it using a virtual COM port. This can be useful for a variety of applications, such as monitoring and controlling industrial machinery, or reading and writing data from sensors and actuators.

The PDS-5105D-MTCP supports a variety of Ethernet protocols, including TCP/IP, UDP, and Modbus TCP. It also supports a variety of COM port settings, including baud rate, data bits, parity, and stop bits.

To use the PDS-5105D-MTCP, you will need to install the VxComm Utility software on your computer. This software will allow you to search for the device on the network, configure its Ethernet settings, and map it to a virtual COM port.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents