776.496UK User Manual
CPD-9
19” 8-WAY IEC POWER DISTRIBUTOR
Item ref: 776.496UK
User Manual
Please do not open cover as it contains high voltage. This product is not
serviceable or repairable by the end user.
Please refer to qualified personnel for service or repair.
Please read this manual thoroughly before use.
Any damage caused by misuse of the product will void the warranty.
Protect your equipment and organise your power distribution with this 19" rack mounting unit. The
front panel features a digital voltage meter and two LED lamps with dimmer control for illuminating
your rack.
• 19" 1U rack mountable
• 8 rear and 1 front IEC outlets
• 2 front mounted LED lamps
with dimmer control
• Digital voltmeter displays
incoming line voltage
• Surge protection
• 10A capacity with circuit breaker
Specifications
Power supply 230Vac, 50Hz
Max. output current 10A
Outputs IEC, 8 rear & 1 front mounted
LED type 2 x 3W LEDs
Dimensions 482 x 178 x 44mm
Weight 2.6kg
776.496UK User Manual
Front Panel
1. Switched IEC output
2. Dimmer switch for LED rack lamps
3. LED rack lamps, pull out to use
4. Voltage meter displays incoming line voltage
5. Protection ‘OK’ indicator
6. On/Off power switch
Rear Panel
7. Power in
8. Limited protection switch, 10A, press to reset
9. 8 x IEC power outputs
This product is classed as Electrical or Electronic equipment and should not be disposed with other
household or commercial waste at the end of its useful life. The goods must be disposed of
according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2016. AVSL Group Ltd.
-
1
-
2
