PAC OS-1 Tech Brief

  • Hello! I am an AI chatbot trained to assist you with the PAC OS-1 Tech Brief. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Paciļ¬ c Accessory Corporation - 1502 S. Santa Fe Street, Santa Ana, CA 92705
www.go2pac.com Voice: 714-835-3022 Fax: 714-835-3233 [email protected]
MOBILE AUDIO INTERFACING EQUIPMENT
OS-1
Bulletin
1999-2002 Pontiac Grand Prix
April 10, 2002
Problem: After installing the OS-1, the interface does not respond when the OnStarĀ® call button is pressed.
Solution: You will need to relocate the green wire in the OS-GM9 connector. It will need to go into pin#15 of
the OS-GM21 connector as shown in diagrams below.
pin# 15
stick paper clip
in slot above pin
pop clip out
Pop white locking clip out on the OS-
GM9 connector in the location of the
green wire by using a small flat head
screw driver.
Insert paper clip into the slot above pin
of the OS-GM9 connector and push
metal clip down while gently pulling on
green wire. If done correctly, wire will
pull out easily.
Insert green wire into pin#15 of the
OS-GM21 connector.
/