SleepTunez
™
Bluetooth Sleep Mask Speakers & Microphone
USER MANUAL
Features:
1. SleepTunez
™
blocks out light while you enjoy your music, wirelessly.
2. Built-in microphone for hands-free telephone use, wirelessly.
3. Compatible with any Bluetooth-enabled device.
4. Soft, slow-recovery memory foam covered in microfiber is comfortable and relaxing.
How to operate:
1. Press the ON/OFF button (about 5 sec) until the LED light blinks from blue-red.
2. Open Bluetooth settings in your device and pair with "SleepTunez"
3. After successful pairing, you can enjoy the wireless function of the built-in speakers. Pressing the ON/OFF button briefly will pause.
4. Press the ON/OFF button to ANSWER/END a phone call
5. Press & hold the ON/OFF button for 2-3 seconds will dial last number.
6. Press & hold the PREVIOUS button for VOLUME (-), press & hold the NEXT button for VOLUME (+).
7. While charging the red LED light will remain on. When charging has completed, the red LED light will turn off.
1. LED Light Indicator
2. Volume(+) / Next Track
3. ON/OFF & Play/Pause
4. Volume(-) / Previous Track
Package Contents:
1 x SleepTunez™ Bluetooth eye mask
1 x Micro USB Charging cable
1 x User guide
Washing Instructions:
Before washing, be sure to remove speakers & all
electronic parts from the SleepTunez
™
mask. Simply
unzip & remove control boxes from their inner pouch
(both sides) and pull memory foam with electronics out
one of the unzipped ends. See below: