Whirlpool AKT 155/IX Program Chart

Brand: Whirlpool

Model: AKT 155/IX

Type: Program Chart

Whirlpool AKT 155/IX is a radiant cooktop that features four cooking zones, including a dual cooking zone, for versatile cooking options. With intuitive knob controls, you can easily adjust the power settings to suit your cooking needs. The residual heat indicator lamps provide added safety by showing which cooking zones are still hot. The cooktop's sleek design and easy-to-clean glass-ceramic surface make it a stylish and practical addition to any kitchen.

5019 319 01074

AKT 155 PRODUCT DESCRIPTION SHEET

BG RO HR SL GB

• To use the hob turn the knob(s) clockwise and position

it (them) on the required power setting or symbol

(each number/symbol corresponds to a different power

setting/function).

• To switch off the hob return the knob(s) to position “0”.

• Cooktop functions are explained in the separate “Oven

Product Description Sheet”.

N.B.: The cooling fan runs continuously at different

speed according to the temperature value of the

components when the cooktop or the oven are in use.

The fan may continue to run for the time necessary to

ensure sufficient cooling of the components and

adjacent kitchen units after the appliances have been

switched off.

Important:

To avoid permanently damaging the glass-ceramic top,

do not use:

- Pots with bottoms that are not perfectly flat.

- Metal pots with enamelled bottom.

Any aesthetic defects (scratches, marks etc.) must be

reported at the time of installation.

DIMENSIONS OF COOKING HOB AND WORKTOP (mm)

1. Radiant cooking zone Ø 145

2. Radiant oval dual cooking zone

3. Radiant cooking zone Ø 145

4. Radiant dual cooking zone Ø 210

5. Residual heat indicator lamps

Type PFEVS 230 V ~ 50 Hz 6.8 kW

Assembly

A) If the worktop is made of wood, use the appropriate

brackets, spring clips and screws provided.

• Position the 4 clips (A), if not alreay fitted, around the

cooktop frame, in the slots provided, see Fig. 1.

• Measure the centre of the vertical sides of the cut out a

shown in Fig. 2.

• Position the centre of the brackets (C) on the centre of

the side previously identified.

• The upper edge of the brackets must be flush with the

worktop surface.

• Secure using the 4 screws (B) provided that should

screwed into the pre-prepared holes.

• Insert the cook hob into the pre-prepared hole ensuring

that the clips (A) lodge into the bracket slots provided

(C Fig. 4 and 5).

B) If the worktop is made of marble or other materials

(plastic compounds, ceramics, stone, etc.), the hob

must be fitted by means of brackets code 4819 310 18528

(to be ordered from After-Sales Service if not provided).

• Fit the hob into the worktop.

• Position the brackets (C) as shown in the figure, in

accordance with the thickness of the worktop.

• Secure the screws (E) in holes (D).

Fig. 2

Fig. 1

Fig. 3

Fig. 4

Fig. 5

Top min. 20 mm

Top max. 50 mm

Whirlpool AKT 155/IX Program Chart

Whirlpool AKT 155/IX Program Chart

Whirlpool AKT 155/IX Program Chart

Related papers

Other documents