Whirlpool AKT 156/NB User guide

Whirlpool
Brand
Whirlpool
Model
AKT 156/NB
Type
User guide

This manual is also suitable for

5019 319 01131
AKT 173 PRODUCT DESCRIPTION SHEET

DE GB FR NL ES PT GR SE NODK FI PL CZ SK HU RU BGRO LV LT ET
• To use the hob turn the knob(s) clockwise and position it
(them) on the required power setting or symbol (each number/
symbol corresponds to a different power setting/function).
• To switch off the hob return the knob(s) to position “0”.
• Cooktop functions are explained in the separate “Oven
Product Description Sheet”.
N.B.: The cooling fan runs continuously at different speed
according to the temperature value of the components when
the cooktop or the oven are in use.
The fan may continue to run for the time necessary to ensure
sufficient cooling of the components and adjacent kitchen units
after the appliances have been switched off.
Important:
To avoid permanently damaging the glass-ceramic top, do not
use:
- Pots with bottoms that are not perfectly flat.
- Metal pots with enamelled bottom.
Any aesthetic defects (scratches, marks etc.) must be reported
at the time of installation.
DIMENSIONS OF COOKING HOB AND WORKTOP (mm)
2
1
3
4
5
1.
Radiant cooking zone Ø 180
2.
Radiant oval dual cooking zone
3.
Radiant cooking zone Ø 145
4.
Radiant dual cooking zone Ø 210
5.
Residual heat indicator lamps
Type PFEVL 230 V~ 50 Hz 6.8 kW
Assembly
A)
If the worktop is made of wood
, use the appropriate brackets, spring clips and screws provided.
Measure the centre of the vertical sides of the cut-out as shown in Fig. 1.
Position the centre of the brackets (
C
) on the centre of the side previously identified.
The upper edge of the brackets must be flush with the worktop surface.
Secure by means of the 4 screws (
B
) provided, using the pre-drilled holes, as shown in Fig. 2.
Position the 4 clips (
A
), if not already fitted, around the hob frame, in the slots provided, see Fig. 3
Insert the hob into the pre-prepared hole ensuring that the clips (
A
) lodge into the bracket slots provided
(
C
Fig. 4)
B)
If the worktop is made of marble or other materials (plastic compounds, ceramics, stone, etc.)
,
the hob must be fitted by means of brackets, code 4819 310 1852. (to be ordered from After-sales Service
if not provided).
Install the cooking hob in the worktop.
Position the brackets (
C
) as shown in the figure, in accordance with the thickness of the worktop.
Secure the screws (
E
) in holes (
D
).
Fig. 1
B
Fig. 2
C
Fig. 3
A
Fig. 4
To p m in . 20
To p m a x . 5 0
  • Page 1 1
  • Page 2 2

Whirlpool AKT 156/NB User guide

Whirlpool
Brand
Whirlpool
Model
AKT 156/NB
Type
User guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents