Telex HR-1L User manual

Category
Headphones
Type
User manual
HR-1L
Medium-Weight, Single-Sided, Listen-Only Headphone with Pigtail Termination
The Telex HR-1L is a medium-weight, noise reduction headphone. It has a noise reduction rating of 21dB,
and is suitable for use in moderately noisy environments. The HR-1L features a unique, soft moleskin-
covered headband design that distributes ear cushion pressure evenly over the entire ear with no pressure
points, unlike conventional designs, which apply more pressure on the bottom of the ear than the top. An
added advantage of this design is that the headset folds into an extremely compact shape for ease of stor-
age and transportation.
Headband Pressure Adjustments
Features
HR-1L Specications
Connector Termination
Stripped Wire
Type
Single Sided
Speaker Sensitivity
95dB SPL @1kHz, 1mW
Speaker Frequency Range
100Hz - 3kHz
Speaker Impedance
300ohm
Weight
15oz. (not including cord)
Cord Length
5 ft.
Color
Black
Ordering Information
HR-1L
Medium-Weight, Single-Sided, Listen-Only Head-
phone with Pigtail Termination
Catalog Number: 300534-005
This specications information is preliminary and is subject to change without notication.
Brand names mentioned are the property of their respective companies.
Contact Information
Telex Communications, Inc.
12000 Portland Avenue South
Burnsville, Minnesota 55337
Telephone: 877·863·4169
Fax: (800) 323-0498
Form Number: LIT000216000 Rev A
Date: December, 2007
  • Page 1 1
  • Page 2 2

Telex HR-1L User manual

Category
Headphones
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI