Jeep Baby Traveller Portacot Instructions Manual

Brand: Jeep

Model: Baby Traveller Portacot

Category: Baby furniture

Type: Instructions Manual

Jeep Baby Traveller Portacot is a portable and convenient baby cot that can be used for a variety of purposes. It comes with a bassinet and changing table, making it ideal for newborns and infants. The cot is easy to assemble and disassemble, and can be folded up for easy storage and transportation.

The top rails of the cot automatically lock when lifted fully, and the floor handle will lock automatically when pushed down. The floor pad is padded for comfort, and the mattress overlay ensures that your baby is safe and secure. The bassinet can be attached to the cot using clips, and the changing table can be attached using U-shaped clips. Both the bassinet and changing table can be removed when not in use.

Jeep Baby Traveller

Portacot

Instructions

Please take a moment to read through these instructions

before you use your Jeep Portable Cot.

• NEVER leave child unattended. ALWA

IMPORTANT

BEFORE ASSEMBLING THIS COT READ AND UNDERSTAND

THE INSTRUCTIONS. INCORRECT ASSEMBLY MAY MAKE THE

COT UNSAFE. DO NOT USE THIS COT IF ANY PART IS BROKEN,

TORN OR MISSING. KEEP THESE INSTRUCTIONS IN A SAFE

PLACE FOR FUTURE REFERENCE.

YS keep child in full view.

• Cot MUST be fully assembled with all top rails locked into position

prior to attaching bassinet and changing table.

• DO NOT place child in cot unless all top rails are securely locked

into position and floor pad is in proper place. Infant may roll into

space between pad and loose mesh sides causing suffocation.

• This portable cot is intended for use by a child who cannot climb

out of the cot, is less than 89cm tall and weighs less than 14kg.

• DO NOT use this cot if the covering material has been bitten through.

• MATTRESS SIZE: This cot is made to use a mattress which is

630mm wide, 960mm long and no more than 24mm thick. Using the

wrong size mattress may create hazardous gaps that could result in

suffocation or could reduce the side height of the cot which may

result in your child falling out from the cot.

• When using the reversible mattress pad, ALWAYS fully secure it

to the mattress using the velcro tabls.

• Carefully read the warning on canopy to avoid heat exposure.

• DO NOT use bassinet or changing table when child is in cot.

• STOP using the bassinet or changing table when your infant is 3mths

old or weighs more than 6.8kg.

• To prevent injury from falls, DO NOT use bassinet or changing table

when child is able to sit up or roll or push up on hands and knees.

• Use all clips to attach bassinet and changing table to the cot.

Make sure clips are fully snapped into place. DO NOT use if any

clips are broken or missing.

• ALWAYS use restraint system when changing child on the changing

table.

• ALWAYS keep child within arms reach when using the changing

table.

• DO NOT use bassinet or changing table on a bed, floor or other

surfaces.

• The bassinet and changing table are designed for use ONLY with

this Jeep Portable Cot. Only use bassinet and changing table

provided by the manufacturer.

• DO NOT use the changing table as a sleeping or play area.

• Before each use or assembly of product, inspect for damaged

hardware, loose joints, missing parts or sharp edges. DO NOT use

this product if any parts are missing or broken. Contact Born with

Style for replacement parts and instructional literature if needed.

DO NOT use suitable parts.

• Although Born with Style DOES NOT RECOMMEND refinishing this

product, if you choose to refinish, use a nontoxic finish specified

only for children’s products.

AVOID SUFFOCATION HAZARDS:

• To prevent suffocation from entrapment, use only the floor pad

provided by manufacturer.

• Ensure mattress pad is fully secured using velcro tabs.

• If a sheet is used, only use a fitted crib sheet that tucks at least 5cm

under the bassinet and changing table or floor pad on all sides to

avoid entanglement.

• When using bassinet, make sure floor pad sits flat against floor of

bassinet.

• DO NOT leave child in product with any side lowered. Be sure all

sides are raised and locked in position at all times.

• NEVER use plastic shipping bags as mattress covers. Do not use

plastic film as mattress cover unless sold and intended for that

purpose. They can cause suffocation.

• DO NOT use a water mattress with this product.

• DO NOT use extra mattress pad on bassinet.

• DO NOT leave anything in the cot such as toys, that can provide a

foothold.

AVOID STRANGULATION HAZARDS:

• Strings can cause strangulation! DO NOT place items with a string

around child’s neck (hood strings, pacifier cords, etc.) or attach

strings to toys.

• DO NOT suspend strings into a cot.

• DO NOT place the cot near a window where cords from blinds or

drapes can strangle a child.

AVOID HEAT EXPOSURE HAZARDS:

To avoid over-heating your child:

• Keep product out of direct sunlight.

• Turn mesh sides away from direction of sun.

• ALWAYS keep entire floor pad shaded from sunlight.

• Be sure to take note of warning on Canopy for heat exposure risks.

AVOID OTHER HAZARDS:

• DO NOT use the cot near naked heat sources, bar heaters, open

fires or exposed flames.

• Keep medication and small items that a child could choke on away

from the cot.

• The thickness of the mattress has been specified to ensure that the

distance from the top of the mattress to the top of the lowest side or

end will always be at least 500mm. This will reduce the risk of

children falling out of the cot.

• DO NOT place more than one child in bassinet, cot or on changing

table.

• DO NOT use in a motor vehicle - child can be seriously injured during

an accident or sudden stop.

• DO NOT move or fold bassinet, changing table, or cot with child in

it - child could be injured.

ACCESSORIES:

• The following items are accessories that are approved for use:

• Change table

• Bassinet

• Canopy

• Mattress overlay

• Carry bag

Parts List

Portable Cot Floor Mat Full Bassinet

Changing Table

Canopy Mattress overlay

Tubes (x2) Travel Bag

Floor Pad

How to Assemble Your Portable Cot

To Open Portable Cot

Remove any cardboard inserts

or plastic ties used to protect

the product during shipment.

Stand the portable cot unpright.

Undo velcro straps on oor

pad and remove oor pad from

unit.

Pull up sharply on centre oor

handle to make sure oor joints

are unlocked. Handle must be

even with top rails.

WARNING

• Failure to lock all 4 top rails in upright position and lock centre oor handle can result in

death by suffocation.

• Infants can suffocate:

• In gaps between the side of the product and either an extra mattress or a mattress too

small or too thick.

• On soft bedding. NEVER add a mattress, pillow, comforter or padding. Use only

mattress/pad provided by manufacturer.

• NEVER LEAVE infant in product with sides down. Infant may roll into space between

pad and loose mesh causing suffocation.

Lift each top rail until it locks.

• Top rails automatically lock when lifted fully.

• Top rails cannot lock if the oor is attened

rst.

• If one or more of the top rails will not lock,

pull sharply on centre oor handle to make

sure oor joint(s) are unlocked.

• Check that all four top rails are locked

proceeding to Step 6.

Push down oor and fold oor

handle over. Floor handle will

lock automatically.

Install oor pad, padded side up.

Thread velcro straps through oor

and fold over under the oor.

Repeat for all corners.

Do not use portable cot without

oor pad.

NOTE: If using mattress overlay

ensure all 4 sides are secured

by velcro tabs.

Inspect Portable Cot Before Use

Push down on all 4 top rails to

make sure they are locked (“A

on illustration).

Push down on all 4 oor joints

and the oor centre to make

sure they are locked and oor is

completely at (“B” on illustration).

To Assemble Bassinet

IMPORTANT: Always use

this illustration to inspect the

portable cot before use.

WARNING: DO NOT place

bassinet on unit if a child is

in the playard.

Remove oor pad from portable

cot

Unfold bassinet. Pull apart two

halves of metal tubes, straighten

and slot together.

Place clips over portable cot

and push down on all 8 bassinet

clips to secure onto top rails.

Place oor pad in bassinet, with

the padded side up.

To Attach Canopy

Attach velcro to the middle of one

long side of the portacot.

Wrap the elastic on the canopy

around both corners of the

portacot.

Repeat for the other side, by

wrapping the canopy over the

remaining two corners of the

portacot and then attaching the

velcro.

To Assemble and Attach Changing Table

Take one of the provided metal

tubes and slide through one of

the sleeves at either end of the

changing table.

Gently press metal button inward

while guiding tube into corner

opening of U-shaped clip as

shown. Be sure that metal button

is securely locked into place.

Repeat at other end.

Position U-shaped clips of

changing table over side rail

as shown. Press down gently

ensuring that all clips are resting

securely in place.

Repeat for opposite end of

changing table.

Thread velcro webbing through

the plastic rings and fold back as

shown.

IMPORTANT: Make sure

portable cot is fully assembled

with oor pad in place.

How to Properly Use Your New Portable Cot

Make sure changing table is

resting securely on portable cot.

To fasten restraint buckle, push

together as shown.

Adjust restraint buckle to t

snugly around child’s waist.

To unsnap restraint buckle,

press tabs.

WARNING: Avoid serious

injury from falling or sliding off.

Always use safety restraint.

To Secure Child in Changing Table

To Remove Changing Table

Remove U-shaped clips of

changing table from portable

cot rails.

Remove both short metal tubes

from changing table sleeve by

pressing metal button inward

and guide tube out of opening

of U-shaped clips. Repeat

process for other side.

Fold changing table and store

in zippered compartment on

outside of travel bag.

Remove oor pad from bassinet

and remove bassinet clips from

portable cot rails.

To collapse bassinet, grasp oor

rods, pull apart and fold in half.

Fold bassinet and store in

zippered compartment on outside

of travel bag.

To Remove Bassinet

To Fold Portable Cot

IMPORTANT: Top rails

cannot be unlocked rst.

Remove bassinet, changing table

and portable cot oor pad.

Take hold of handle and turn

handle to vertical position and

pull upright to unlock oor.

Handle should be even with

top rails.

NOTE: A sharp fast pull will release

oor locks.

Locate centre of each top rail.

Lift and squeeze centre of top

rail to release lock. Then push

down on top rail while continuing

to squeeze.

NOTE: To fold, top rail must be lifted to

release lock. Top rail cannot be pushed

in until the lock joint is lifted. If top rail

will not unlock, pull up sharply on centre

oor handle to make sure ALL oor rails

are unlocked. Handle must be even with

top rails.

Repeat for all sides.

Pull handle to bring oor

completely up and gather legs

together.

NOTE: To fold compactly, the centre of

the portable cot oor must be pulled all

the way up.

To Pack Portable Cot

Lay oor pad at on the oor,

padded side up and place folded

portable cot off centre on second

oor panel as shown.

Wrap oor pad around folded

portable cot. Thread velcro

straps through rings on oor pad.

Pull bag down over portable cot.

Zip travel bag.

Store bassinet, changing table,

toy bar and toys in zippered

compartments on outside of

travel bag.

Trouble Shooting Guide

Top rails fail to lock into an upright position.

Centre of oor must be raised up to level of top rails.

A sharp pull on the centre oor handle will release oor

locks allowing the top rails to be locked upright.

If necessary, hold the centre oor handle with one hand

and lock rails one at a time.

The oor joints do not atten.

Turn portable cot upside down and make sure oor

joints are free from foreign objects.

Top rails do not unlock to fold.

Centre of oor must be raised up to level of top rails.

A sharp pull on the centre oor handle will release oor

locks allowing the top rails to be unlocked.

Lift top rail rst, then squeeze to release lock.

Floor joints do not unlock.

Raise centre oor handle up to the level of the top rails

to unlock oor joints.

Folded portable cot does not t into oor pad and it

is difcult to attach velcro straps.

Pull centre oor handle outward (toward corner caps)

and push legs inward to compact portable cot.

Shift portable cot lower on pad or turn slightly and try

again. (see illustration on page 14 for proper placement

of portable cot for folding).

Bassinet does not t onto portable cot.

Portable cot top rails must be fully upright and locked.

Portable cot oor must be at and centre oor handle

must be locked.

Only use bassinet provided with this product.

Changing table does not t onto portable cot.

Portable cot top rails must be fully upright and locked.

There are many ways to look after and protect your Jeep

portable

cot. The most important is to clean up any spills or food, before it dries

on the fabric.

Wipe surfaces clean using water and mild bleach free soap.

DO NOT use scouring powders, or abrasive cleaners. Wipe dry

using a soft, clean cloth or air dry.

Jeep

is a registered trademark of DaimlerChrysler Corporation, and is

2007.

Born With Style warrants this product to be free of defects in materials

and workmanship as follows: For a period of ONE YEAR from the

date of purchase, Born With Style will repair or replace, at its option,

the defective product. This warranty is given in addition to (and not in

substitute for) applicable statutory rights which you may have.

We sincerely thank you for purchasing this Born With Style product.

For further information visit: www.bornwithstyle.com.au

Warranty

Care & Maintenance

No refunds will be given on used product unless assessed by Karlises

as faulty. For all spare parts, repairs or warranty issues, please take

your product back to Toys R Us who will contact Karlisles, the service

agent on your behalf.

For all spare parts, repairs or warranty issues, please contact:

Karlisles

Phone: 1300 308 435

Email: [email protected]

Web: www.karlisles.com.au

Replacement parts provided by local distributor due to accidental

damage or misuse will be charged accordingly.

To contact the manufacturer directly:

Born With Style

PO Box 789

Gladesville NSW 1675, Australia

Phone: 1300 855 337 or 02 9816 3837

Email: [email protected]

Web: www.bornwithstyle.com.au

This product meets and exceeds Australian Standard

AS/NZS 2195:1999

Born With Style recommends that you keep a record of important

information about your Jeep

stroller. Please complete the information

in the space provided.

Model Number:

Date of Manufacture:

Date of Purchase:

Personal Record Card

Contact Details

Jeep Baby Traveller Portacot Instructions Manual

Brand: Jeep

Model: Baby Traveller Portacot

Category: Baby furniture

Type: Instructions Manual

Download PDF

report

Jeep Baby Traveller Portacot Instructions Manual

Jeep Baby Traveller Portacot Instructions Manual

Related papers

Other documents