2. Best Quality Furniture
  3. AC68

Best Quality Furniture AC68 User guide

  • Hello! I am a chat assistant familiar with the assembly instructions for the Vanity Desk 0290A and Stool AC68-1. I've reviewed the document, which contains detailed steps, parts lists and warnings for the assembly, including the need for two people during the process. I'm ready to answer any questions you might have about assembling the vanity and stool.
  • How many people are needed for assembly?
    What should be done before assembling the vanity?
    What tool is needed to tighten CSK screws?
ASSEMBLY INSTRUCTIONS
No ITEM Qty
A
Vanity Desk Top
1 pc
B
Vanity Desk Bottom
2 pcs
C
Vanity Desk Cemter
Panel
1 pc
D
Vanity Stool
1 pc
E
Stool Leg
4 pcs
PAGE 1 OF 2
Insert Wood dowel (6) into Vanity Bottom (B) predrilled hole dowel as shown and then locate the Vanity Top (A) to the Wood dowel (6).
Secured with,JCBC Bolt (3) Spring Washer (4),Flat Washer (5) and tighten them by using Allen key (1).
(Please Do Not Fully Tighten within this steps).
STEP 1 :
No ITEM Qty
1Allen Key m4x65mm
Blk 1 pc
2Flat Head Chipboard
Screw m4x25mm Rbw 11
pcs
3JCBC Bolt m6x30mm
Blk 2 pcs
4
Spring Washer 1/4" Blk 2 pcs
5
Flat Washer
1/4"IDx19mmOD Blk 2 pcs
6
Wood Dowel
6mmx20mm 4 pcs
Repeat same steps for the next Vanity Desk Bottom (B) assembly.
STEP 2 :
Assemble the Vanity Desk Center panel (C) and Vanity Desk Bottom (B) with CSK Screw (2) and tighten them by using Screw Driver.
(NOT PROVIDED)
STEP 3 :
7X
WARNING! : Need two Peoples for assembly process.
REMARK : PULL OUT THE DRAWER BEFORE ASSEMBLY
5
4
3
1
6
6
B
A
2
4X
2
C
No ITEM Qty
7Allen Key m4x65mm
Blk 1 pc
8JCBC Bolt m6x50mm
Blk 8 pcs
9
Spring Washer 1/4" Blk 8 pcs
10
Flat Washer
1/4"IDx19mmOD Blk 8 pcs
ASSEMBLY INSTRUCTIONS
PAGE 2 OF 2
Reinstall the Handle from inside to outside position as shown on a diagrame.
STEP 4 :
STEP 4.1 STEP 4.2
COMPLETE ASSEMBLY
E
E10 9
87
D
STEP 5 : STOOL ASSEMBLY
8X
ASSEMBLY INSTRUCTIONS
No ITEM Qty
A
Mirror
1 pc
B
Mirror Support
2 pcs
Attach Mirror Support (B) to Mirror Frame(A) as shown,secure with Flat Head Screw(1) and tighten them
by using Screw Driver.(NOT PROVIDED)
STEP 1 :
No ITEM Qty
1Flat Head Chipboard
Screw m4x32mm Blk 8 pcs
2
Adaptor 5V2A UL
Certificate 1 pc
Place the Mirror (A) on top of Dressing Table by follow the marking line and secure with CSK Screw (1) and tighten them
by using Screw Driver.(NOT PROVIDED)
STEP 2 :
WARNING! : Need two Peoples for assembly process.
BACK VIEW
No ITEM Qty
C
Dressing Table
1 set
REMARK : Support front mirror with polyfoam to avoid Light Bulb from damage before
fix the mirror support .
REMARK : Centre Marking Line
REMARK : Marking Line
REMARK : Center Marking Line
1
4x
4x 1
BC
A
A
C
COMPLETE ASSEMBLY
Plug into adaptor (2)
2
Plug into electric outlet
REMARK : Follow the mirror back marking line for tighten the miror support.
/